I opened the original template PSD image for the home page in Photoshop 7, removed all the layers and slices that filled up the main panel, leaving everything else just as it is. I then switched to ImageReady, saved the HTML index.html file and images Optimized As and then created a site in GoLive 6 and uploaded it as is.
For purposes of comparison, I also created a site in Dreamweaver and checked it in its Preview in Browser and saw the exact same problem: if you switch your resolution to 800 X 600, everything looks perfect. However, at 1024 X 768, the right margin is white instead of being an extension of the page background and the bottom panel does not extend all the way to the right screen margin.
I've been told that I need a containing table with WIDTH=100% to contain the fixed size pixel table in order to resolve this issue.
Please scroll down till you see the image.
I'd appreciate help on resolving this issue.
Is there a way to edit the image size in Photoshop/ImageReady to automatically generate the correct HTML page?
just recently purchased the CS upgrade and I'm having some Imageready problems that I don't have with 7. Perhaps I'm overlooking something, but I've gone in to make sure the settings in both versions are the same wherever possible. I'm using XP Pro (fully up to date with service packs) on a P4 2.4Ghz with 512mb RAM and 120GB hard drive.
If I create a sliced image to svae optimized for web as HTML page, and I select just the bottom row of slices and tell it to save "Selected Slices" only, ImageReady CS is still including the HTML table codes for all of the other non-selected slices, and placing spacer.gif files in them. This presents a big problem, because if I try to remove those unwanted table data boxes and spacers it completely garbles the page, and if I leave them in, I end up with a bunch of unwanted blank space in the page.
In Imageready 7 I do not have this problem. I will save and code only the selected slices that I tell it to, and does not insert a bunch of unwanted table coding with spacer images.
I have been working with PS for a while now, and can hold my own, but someone asked me the other day if I could slice up an image and put it into html from a .psd file.
I have made a click able image in CS6 but when I save it to my computer as a GIF, I'm not able to click on it. I'm saving the file as an "Image" and not using "HTML and Images" as I can't find a way to place HTML files on my website.
I started using Image Mapping earlier today to see what it was...I made a signature for a friend of mine. However i have these two boxes in the image that were suppose to be click-able links. I used Image Mapping to do this however, I found out that after you get the source code it's programed to HTML. I was wondering if there was a way to use the HTML code to put into an IMG.
Like. What i mean is. Instead of using an HTML code for a website banner, Is there a way to do the same concept only in IMG format, And to where when you see the image, You can move your mouse over the two boxes and they could be click-able, And direct you to the specific site that It's programmed to take you to?
I scanned an image of our firm's logo, and opened it in Gimp. It looked excellent in every detail.
Next, I saved the file as a JPEG (of highest quality) and also as a Windows BMP.
Then, using two different HTML editors, I created a page, and inserted the logo. In both cases, the quality of the image was grossly degraded.. In the original, all the edges were crisp and clear, but once in the HTML files, though the images were of their original size, they were quite fuzzy. In fact, some of the smaller text in the logo became rather hard to read.
What would be causing this sort of deterioration, and what might I do to correct this problem?
Is it possible to create an image with different points that are linked to URL's with CorelDraw Graphics Suite X5? I create wordpress websites for clients and I have a client that wants a map with "blinking" identifiers for their different locations. Then when you hover over their "blinking" identifiers they want an image of that location to pop up. Any thoughts on how I could handle this?
I have many inline formulas (imported from Word file via using mathtype) in PDF article made by ID. But when I export the articles as HTML, the images for formulas become much larger than shown in PDF version. How can i keep the exported images to the same size as they are shown the PDF file? I know I can edit the html file to specify image size, but that is the ideal work flow.
I have many documents I need to convert to HTML. I need the images in the documents to be links. This has worked fine, according to normal procedures if the images are png, jpg, or gifs. However, most of my images are not those formats. So if I have an eps, pdf, and tiff in my document, upon html export, there is no hyperlink. That is, the <a href></a> tags are not in the HTML at all. But if I convert the images to png, jpeg, or gifs, put them in my document, then choose that file format for conversion, the links work fine.
I want to say there is an issue with the link tags upon file conversion. It could be something else, but I am not sure why it works for certain file formats and not others. I figured ID would keep the association with the hyperling after converting an image from say and eps to jpg. Any way to keep hyperlinks for images after exporting to HTML.
(I can obviously add the link tags myself in the HTML, or convert the images myself and put them in the docs, but I have many documents and would like some automated way.)
I'm trying to export an image map from Illustrator CS6. However I can't get it to save the HTML.
I've setup my hotspots etc. However when I do "Save for Web", there is no option to save "Images & HTML". It only gives me the option of "Image Only".
The only way I've been able to get the HTML is to click on "Preview" from the "Save for Web" screen, and then copy and paste the image map code from there.
I've also tested it with slices, and same thing. There just seems to be no way to get it to generate a HTML file.
Is there some other way I'm supposed to get it to create the HTML?
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
When I export the image quality is poor. I tried all settings but it does not get better. E.g. I used JPEG, progressive, highest quality. What is the reason for that?
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this: [URL] ....
and I would like it to be like this: [URL] ....
I assume there is some way to make this change using the template editors, but I can't figure it out.
I have an image that is in grayscale and I need a table that displays each pixels grayscale value. Is there a way to save the image in some tabular format or can I convert it any other way in photoshop?
I've tried inserting a table from Excel into Photoshop and making a jpeg and gif out of it, but when I upload it to the web the resolution is terrible. How I can make get a table into an image? It's a bit too complex to create with HTML.
I want to convert a table from .doc to an image file.
If I screen print it and edit in paint.net the quality deteriorates.
I copied the table from the doc file and directly pasted in paint.net
This is what i get after pasting it,
My question:
How do I get a white background for this table? I want the quality same as you can find in the word doc. I used paint bucket but again the quality doesn't look the same.
You have an image of a wooden table, but would like the table to be a bit redder.So you would select the table and use a "blend with color" tool that would work like a bucket, but instead mix the default color of the table(or the selection) with the color you pick.So you pick red and... You got yourself the same table only instead of it being wood-brown, its reddish wood-brown.
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014 Inventor 2012 SP2, Vault 2014 HP Workstation Z220 Intel Xeon 3.4GHz 16GB RAM Nvidia Quadro 4000 Windows 7 Professional (64bit)
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
I would like to design the table from the image. I am having some problems giving thickness to the snail shell. I extruded it (wasn't that pleased with the result but... it was better than nothing) and tried to smooth it. The result was a horror because there were to many edges and maya took them as a height difference.
My question is: 1. How can i make the thickness better, without all the holes? (can i create edges between vertices) 2. How can i smooth the poly without making it look like a shell covered inside with spikes.
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
Say I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
what is the process that the veterans use to get their graphic PSD ideas into a working HTML/CSS page? Currently I have been making creating a web layout, then once completed I make some layers invisible, then I duplicate it to another file, then Save As a jpg, gif or png. This has been a lengthy process and doesn't always work that well depending on how the layers are broken up or merged;
