CorelDRAW X6 :: Not All Text Selected
Jul 17, 2013
In my job, I wrote a lot of technical manuals in CorelDraw x6 because of it strength in page layout involving text and graphics. And its multi-page capabilities.
One big questions: if I use the shortcut ALT+T to select all text, not all text are selected at all. Is this a defect?
In my work, I need to convert all text in the manual to curves before sending to the external printer. I had end up browsing the entire Object Manager list to ensure all text are converted to curves. Of course, this is a pain in the neck as I have many pages and objects to work on.
Note: I had discovered some text in a) groups, b) locked, and c) embedded properties often found not selected at all.
My manuals include locked objects with text, illustration diagrams with text, paragraph and artistic text.
View 7 Replies
ADVERTISEMENT
Jul 13, 2011
I have a large text with different letters and want to change the different letters with different color. for an example
RTKIFIRFPKTLFATEDALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRF
PKTLFATEDSLEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRFPKTLFATE
DALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHEPRRTKIFIRFPKTLFATEDALEIRR
QSLATKIQATWRGFHCRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIQGFILRHAPRRTKIFIRFPKTLFATEDSLEVRRQSLATKI
QAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHSPR
How do I select all the text and change the same letters to a selected color at once, I know how to change the color for a letter one by one, but it is too tedious.
View 2 Replies
View Related
Feb 1, 2011
I've noticed an odd issue when we upgraded from X4 to X5. On an identical document when we select a text block, in X5 the block "jumps" up and to the left by about 10 pixels. Below is a video of this peculiar behavior. X5 shown on the left, X4 shown on the right. Both documents are identical.
[URL]
View 14 Replies
View Related
Sep 18, 2013
CorelDraw X6.Since the last update, some of the subsequent fonts in a list will not apply to the selected text.
View 14 Replies
View Related
Mar 29, 2013
I've encountered a strange issue in PSDs I've inherited from another designer.
When I have a text layer selected with the type tool active, the font size reads correctly (say, 40px). When I actually select the text with the type tool, the font size gives a strange number (say, 38.74px).
See the screenshots below:
This is on OSX 10.8.3, Photoshop CS6.
View 1 Replies
View Related
Jul 16, 2013
Running PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
View 6 Replies
View Related
Oct 25, 2012
A program that prompts:"select objects:" then I can select some objects like as text, line, circle,... after that program find all texts in selected items and swap text
swap means: xxx/yyy ===> yyy/xxx ; "/" is a divisor
swap function for one text is here:
(defun c:swap ( / pos ent el txt)
(vl-load-com)
(if(null #div#)(setq #div# "/"))
(setq #div#
(if(=(setq tmp(getstring(strcat "
Divisor character: <"#div#"> ")))"")
#div# tmp
)
[Code]....
but I want a program to prompt me like this:
(prompt "Select objects:")(terpri)
(setq a (ssget '((0 . "TEXT"))))
and gets divisor char </>:
after that:
(setq n (sslength a))
(repeat n
....
)
repeats n times, n=number of texts in my selection
View 6 Replies
View Related
Sep 28, 2012
Instead of adding text as a prefix or suffix i would like to know if it is possible aswell to remove text from within text: For example:
I have these texts "I am not good", "he is not good", "what not to be" And i would like to remove the word "not" from all selected text so i would get "i am good", "he is good" , "what to be". The set word not will always be the same, so there is no need for user string input.
View 6 Replies
View Related
May 29, 2012
Program: CorelDraw X6 64 bitOS: Windows 7 SP1 64 bit
I have problem when exporting selected only artwork to eps. The artwork itself contains standard fill objects with no strokes and no special effect on each object (drop shadow, powerclip, etc). On EPS Export dialog I change nothing, just clicked OK button.
The problem is there is no sign if the process success or fail.The file created only have zero bytes.The File>Exit menu is dimmed.When I try to close the document, it say:
Some of the documents could not be closed, because tasks are being performed in the background. Check the status bar of each opened document to see what tasks are being performed and their progress.
I can't close the document and exit the program, so I have to use Task Manager. Also if I continue to edit the artwork, i.e. selecting an object inside a group, the program crashed.
The Windows Crash Report:
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDrw.exe Application Version: 16.0.0.707 Application Timestamp: 4f4c60a4 Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.17725 Fault Module Timestamp: 4ec4aa8e Exception c0000005 Exception Offset: 000000000005386a OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1057 Additional Information 1: 91e0 Additional Information 2: 91e002aff0b00b72d21810f7f6e3ec21 Additional Information 3: df3c Additional Information 4: df3c618bdba74b45b8aca9fde7c3e7c7
View 2 Replies
View Related
May 9, 2011
For some reason Corel will not let me select an object and move it with my mouse, I can only move an object with arrow keys.
View 4 Replies
View Related
Dec 31, 2012
If i select 2 or more shapes & then run a micro.Rename all shapes name to user input name. code is that but it is not working
Sub RenameShape() Dim objName Dim sr As ShapeRangeDim s3 As Shape Set sr = ActiveSelectionRange If sr.Shapes.Count = 0Then MsgBox "You need to select a shape first" Exit Sub End If objName = ActiveWindow.Selection.ShapeRange(1).Name objName = InputBox$("Assing a new name to this shape", "Rename Shape", objName) If objName <> ""Then Set s3 = ActiveDocument.Selection.Name = objName End If Exit Sub End Sub
View 1 Replies
View Related
Nov 3, 2013
I'm using Dropbox to synchronize my files with another computer and do backups. Over the last three months I haven't been doing anything with my CorelDraw files but recently tried opening a file and found there was a problem. When attempting to open a file, I get this error:
Either filename is not importable using the selected filter, or this format is not supported.
I thought it was related to Dropbox so I created a brand new file, saved it and was able to open it. Dropbox sync'd the file and Dropbox gave an update message that Dropbox has updated the file to the most recent version. Afterward, I wasn't able to open the file with CorelDraw anymore.
I'm using CorelDraw X5 and saving the file in X5 format. Is there anything I can do to recover my files?
View 7 Replies
View Related
May 17, 2012
Is there any simpler way of applying hues to the selected objects at once despite of selecting each element and applying the hue.
[URL]
View 1 Replies
View Related
Jun 30, 2013
I know how to remove all the border of a selected object.
But how to remove only one side (between 2 nodes), such as remove only the left side border of a square ?
View 9 Replies
View Related
Oct 18, 2013
In X5 Draw I am working on a job and the run time error comes up and shuts X5 down. And then when i restart and try to access that same file (saved throughout job) I get this error that the file is not importable by selected filter, or the format is not supported.
View 2 Replies
View Related
Mar 14, 2012
My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
View 5 Replies
View Related
Apr 1, 2005
I was wondering if anybody knew what Photoshop does to an image when you select text in the text tool. I've decided I want to use this effect on part of my image, but I can't figure out how to make it. It's a certain kind of inversion, but using "Invert" does NOT produce the same results. It's got to be simple, but I can't figure it out.
View 8 Replies
View Related
Aug 30, 2012
Here's another video that shows how to make a box around a shape.
Have fun watching me goof up my words
(Note: I notice the forum chops off the right end of the video. Maybe you can save the swf and watch on your computer)
cs_setInnerHtml('video_2ce2321c-4a45-4fd1-9837-ebe8e6def303','');
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it. [URL].....
View 3 Replies
View Related
Feb 15, 2012
I want to know why CorelDraw won't let me select several curves at a time and break them apart simultaneously. When I select more than one (by marquee or shift key) it greys out the "break apart" command, and Control-K won't work either. I did find a work-around macro in an old post, but I don't understand why the CorelDraw programmers turn off the break-apart command for multiple selections.
View 7 Replies
View Related
Mar 26, 2012
I have been looking for a command to define a shortcut for the spot color to the selected element. But i could not figure out. How to covert the selected element into spot color here in x6.
View 14 Replies
View Related
Apr 8, 2011
BDInnerShadow_v2.gms
Here is a free macro which saves a little time. It creates an inner shadow on one or more selected shapes. There are a few presets on the macro and if you want to adjust the transparency slightly, click the undo arrow, adjust the transparency and then reapply.
View 15 Replies
View Related
Jun 9, 2010
I'm getting error "Either is not importable using the selected filter, or this format is not supported" while trying to open a Corel Draw file I received from someone in X3.I read through the posts and can understand only that this could be a Corel Version problem. Based in this I've two questions.
Q1) How to get around this error and successfully open that .cdr file in X3?
Q2) How to determine which version of CorelDraw was used to create this file?
View 7 Replies
View Related
Feb 25, 2008
Whenever I add text, there's a little black and white border around each letter. It looks like it's highlighted, but it's like that even after I save it. Another thing is that while I am doing anything to the picture, nt just text, the colors are inverted.
if i try to save any kind of a document, there is no 'jpg' option. I think there are some other options missing, too.
I just used it last week, and I could save it as jpg and use text at that point.
View 4 Replies
View Related
Aug 8, 2013
I received an Illustrator file in which I have to implement a translated text. I see the text cursor, but when I try to select text it disappears and I cannot see how much of a sentence or word is selected. I can delete the selection or write something else in its place, but I am working "blind" without seeing how much of text I selected until I change it or delete it. I see nothing unusual in Preferences. It is the only Illustrator file that behave that way.
View 3 Replies
View Related
Mar 9, 2010
ALL users of Draw who use it for web-design. If this is intended to be this way and understanding that it's a pain for most users why not just offer the option of having it cropped automatically in the export dialogue?
View 15 Replies
View Related
Apr 25, 2012
I want a gsm to duplicate the selected object left, right, top & bottom sides
View 2 Replies
View Related
Nov 16, 2012
how do I move select parts of text? I have a "B" and a "G" that I put into Illustrator using the text tool. When I go to move the "G" onto the lower corner of the "B", it selects both letters and moves them as a block.
View 3 Replies
View Related
Feb 7, 2013
Have a document that has several artboards in it. (kinda like a multipage document). Each page is similar, but some of the text boxes has variations from page to page. So if I am zoomed in on page 1 to one text box and I select some text, using the type tool, and then hit SHIFT-page down (or page up) to go to the next page, it won't. Switch to a different tool, and it works.
WHY? Why can't I use a keyboard short cut to jump to another page while in the type tool mode? I don't want to take my hand off the keyboard or move the mouse.
View 1 Replies
View Related
Mar 18, 2014
Illustrator 15.1/CS5 on Mac used to display selected text in reverse and would show handles for text on a path. Now it does neither.
View 1 Replies
View Related
Aug 23, 2013
I have finished my works using only one layer( a bad habit I know) and now I need to export them as PSD, and as You know it needs Layers so it can be editable on Photoshop.
I know the fact that I should import all the objects in single Layers, ie creating thousands of Layers for all the work, new layer for each object I import.
But is there any option for easy extraction of objects into single layers, one click option or much easier than going individually through each of them?
If not available, this type of option would work for CorelDRAW or any vector program, be really more effective and stay in touch with the requirements of the industry, especially when it comes, on creating vectors for web or apps.
View 12 Replies
View Related
Aug 2, 2010
I want the selected object to be halved exactly either horizontally or vertically.
View 14 Replies
View Related
