I have been looking for a command to define a shortcut for the spot color to the selected element. But i could not figure out. How to covert the selected element into spot color here in x6.
View 14 RepliesWe print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
Could it read:
Plate: 1 of 3 Color: Pantone 375
Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI've been using corel draw since version 4, and I love it. Now on x5 I cannot figure this out. I use eps files for printing large format with contour lines for cutting. My setup uses a spot color defined as "CutContour" for cutting. It seems x5 renames these colors or converts them to something else. I opened the same file in 12 and had to Reclick the same color for the cutter to see it and it worked fine. Any setting to change this?
View 2 Replies View RelatedJust installed x5 and the only thing is abouit outputting spot colors. I check the box to output seperations, uncheck all the colors I don't want to print - but I still get all the colors printed out, including my page color. I have made SURE that I have only checked the steps I want printed and still get all of the colors printed!
View 5 Replies View RelatedI am trying to set up my CorelDraw x6 workspace so that the default spot color palette is set to Pantone solid coated.
I go to:Tools > Options (or Customization) > Global > Color > set "Default spot color palette" to "PANTONE solid coated"
Unfortunately this seems to be ignored by x6.
Every time i want to change from a CMYK color to Pantone i must do the following:
1) select the objec
t2) double click the color chip adjacent to the Fill icon in the Status Bar
3) which brings up:
4) from here I select the Palettes tab (if it is not already selected)5) then select from the Palette drop down menu:SPOT > PANTONE > PANTONE+ > Solid Coated
This is a very clumsy and inefficient way to work as I must do this EVERY time I want to change from CMYK to Pantone.Is there any way to get x6 to operate correctly or is there something I am missing?
Here at work we have recently upgraded from CorelDRAW 12 to X5. While this has come with plenty of great benefits (able to open newer versions of AI files), it seems some things are still present (stability issues). I actually work on a Mac at home for my freelance stuff so maybe I'm just used to the reliability that comes with a Mac. I enjoy PCs too but with years of experience with both I'd be lying if I said PCs are on par with what Apple brings to the table. Especially when it comes to graphic design work.
So this brings me to the problem of spot color anti-aliasing in the enhanced view of X5. The first two pictures below show how CorelDRAW 12 handled spot colors. These are direct SCREENSHOTS that I cropped in Photoshop, not exports. And I did no extra editing.
There is basically no difference between how the Pantone colors display on screen and how the RGB colors display. Which is great and what you'd expect, right?
However, let us step into X5 for a minute with the exact same colors, using the exact same palette.
Obviously there is a difference here. For some reason X5 has decided to anti-alias the Pantone colors in some weird way so that I get a tiny white outline (no the shapes don't have outlines). And if you look closely at the smaller purple box at the bottom you will see that even when I use the exact same pantone color from the exact same palette but with one color named differently, I get the white outline. The smaller box's color within is named '276 CV' while the outer box's color is named 'PANTONE 276 CV'.
How does simply naming a color effect how it displays on screen? Seems like a bug/glitch to me.
I know what is trying to be done here but why take a step backwards from CorelDRAW 12. I have a hard time using CorelDRAW as it is but as a graphic designer I need to know how something is going to look on screen without this unnecessary anti-aliasing going on.
So my questions are:
1.) Why does this do this in X5 but not 12?
2.) How to maybe turn it off? (I know I can view it in Normal view mode and the colors are fine but then my text is screwed up).
I have try Coreldraw X6 64bit in Windows 7, After use Color Harmony, I have a question about it, How to change color for selected object only, because color harmony change all color in object even it in different page ?
View 1 Replies View RelatedI am using CorelDRAW X6. I am trying to export a graphic that includes several spot colors. The spot colors are from a library that a printer provided me. It is in the same location as my pantone library, and summa spot color library.
When I export as a pdf or eps to send to the printer it converts the spot color to rgb. If I have a pantone color or summa color in the file they stay as a spot but this new spot library does not. If I have these spot colors in a gradient they will stay as spot colors.
When exporting I have the color management checked to use document color settings, output colors as Native, and I have embed the color profile.
Adding the PerfCutContour color swatch in CorelDRAW? Having trouble adding it, I keep getting an error saying that color already exist in the pallet....when it is not in the pallet.
Using VersaWorks and CorelDRAW X5
What the "Bar" in spot color property box means?
View 3 Replies View Relatedi create a spot color (lab color management) when i create the pdf the spot color haven't the name setting in CorelDraw. If i export eps it's works greats! i don't convert spot in cmyk i want spot color in lab! i use onyx production house and it want spot color lab to renoze cutcontour or spot color as white ink.
View 3 Replies View RelatedIs it possible to assign a custom spot color to a shape via VBA? The best I could come up with was something like the following (where "sh" represents a shape):
sh.Outline.Color.FixedAssign cdrCustom, 1, 100
I'm under the impression that cdrCustom is supposed to represent the user's custom spot color palette, but this doesn't seem to work.
Furthermore, I can manually assign a custom spot color to an object and then retrieve the PaletteID and PaletteIndex of that color using VBA. For example:
Debug.Print ActiveSelection.Shapes(1)..Outline.Color.PaletteID
Debug.Print ActiveSelection.Shapes(1)..Outline.Color.PaletteIndex
The PaletteID that returns is 0 (cdrCustom), and the PaletteIndex returned does correspond with its order in my custom spot color palette. In fact, I can also retrieve the Color.Name and it will correctly identify the custom spot color's name.
For the life of me, I just can't seem to assign these colors using VBA. Is it just that the VBA in CorelDRAW 11 is too immature?
why change the CMYK values of a color when converting to spot color in a color chart
xmp C 0 M 90 Y 100 K 0
to C0 M 87 Y 89 K 0
Is there a way how I can unselect element one at the time?
Example if I do fillets and I select wrong edge and I want to unselect only that because I have selected example twenty edges already and dont wont to throw away all work what I have already done.
I have a large text with different letters and want to change the different letters with different color. for an example
RTKIFIRFPKTLFATEDALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRF
PKTLFATEDSLEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHAPRRTKIFIRFPKTLFATE
DALEVRRQSLATKIQAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHEPRRTKIFIRFPKTLFATEDALEIRR
QSLATKIQATWRGFHCRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIQGFILRHAPRRTKIFIRFPKTLFATEDSLEVRRQSLATKI
QAAWRGFHWRQKFLRVKRSAICIQSWWRGTLGRRKAAKRKWAAQTIRRLIRGFILRHSPR
How do I select all the text and change the same letters to a selected color at once, I know how to change the color for a letter one by one, but it is too tedious.
Is it possible to use something like a parameter that would allow you to enter a width in the element properties window of the selected wall(s)?
we would like to have a generic wall (outline only) that the width can be changed per wall for layout purposes, then the walls will be selected & changed later to an actual wall with known materials.
I know my code below wont work, just putting here to hopefully explain more exactly what im trying to do
Sub FindbyFill()
Dim sh As Shape
dim findColor
ActiveSlection.GetColor = findColor
For Each sh In ActiveLayer.Shapes If sh.FillColor = findColor Then ActiveSlection + sh
End If
Next sh
We are using Civil 3D 2014.
We have an alignment curve table and the data text, first data entry (curve number) is appearing as color by layer (magenta), when all colors are set as explicit colors by element in table style under Display tab. How do I control the color of the first entry to be color by element instead of by layer?
Well, so far I"m zero for four in trying to get LR to let me do trivial things the way I'd like, but let's give it yet another try........
I ALREADY KNOW you can use the "[" and "]" to change the size of the spot removal circle. BUT, I'm trying to get LR to work as much like Photoshop as possible 'cause the inconsistencies on small things is a surprisingly large hit to productivity.....
In PS I can change the size of the clone or heal using Alt and the mouse. Change both size AND opacity.
Is this buried somewhere in LR? If not, is there a way for me to define this command in the translatedstrings file?
German shortcut to select new source for existing circle or brush spot (forward slash key (/) on US keyboards) ?
View 2 Replies View RelatedI'm hoping this is a dumb problem that is easily disabled with a perhaps inadvertently-enabled Preference somewhere.In the past few months I've had a lot of trouble with tools I've selected via shortcut key not... "sticking".
In other words, I'll press "Z" for Zoom or "V" for Move, and before I have a chance to use the tool, it's reverted back to whatever tool I was using already. I can sit there and watch it revert back after a few moments on its own.
If I select the tool from the Tool Palette manually by clicking the icon with the mouse, it always stays, as expected.
I seem to encounter this problem more often when I'm utilitizing a lot of RAM or have a very complex document open. Restarting Photoshop seems to "fix" the problem temporarily, but eventually it starts happening again.
I'm using CS6 13.0.5 x64 on OS X 10.8.4.
Some of the lighter, saturated colors in the PANTONE+ swatches library appear to be a different color in the swatch list than they are when applied to a design. see below for screen shots.
i can duplicate this situation on calibrated NEC MultiSync monitors and uncalibrated laptops. We are running on Mac OS X.8x and above.
Designers are complaining about not being able to pick a color from the Swatch Library in AICS6 or AICC. InDesignCC does not seem to have the same issue.
I need to change the default text color to a pantone spot color.
View 5 Replies View RelatedSo Ive learned how to turn a color photo to B&W with spot color ...how to turn a color photo sepia, but also spot color. I have a wedding photos that I think would be a fun shot to play mixing those colors together . I have searched for the info earlier today and wasnt successful .
View 8 Replies View RelatedI am creating over 300 color swatches using a Pantone PMS system. I need to know a keyboard shortcut for the color library or foreground color, or a way to force photoshop to open the color library or foreground color when I create a new file.
View 1 Replies View RelatedMy Corel software sometimes exhibits a kind of glitch where a text element won't show up just after I've created it and most of my fonts disappear. If I go to wire frame view I can see that the text is there, it's as though the text is just white, but I can't change the color to anything else. I can change the font, but I have to do it blindly because most of my font list disappears.
View 5 Replies View RelatedFor family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
Copying a CMYK Indesign CS3 photo element (photo silo) into a Photoshop CS3 RGB document - color retbtion issues in a Smart Object?
View 1 Replies View RelatedWith a RGB or CYMK no problem for me to have certain element in the picture distinguishing from the rest. But now I have to do the same building up in duotone (2 PMS colours). It looks like Photoshop doesn't allow to put a black&white layer into a duotone document (it automatically turns into the 2 duotone colours).
So how can i make a duotone image (source = FC) in which a part looks "black and white" (1 colour=black) and a part "lights up" in the second colour (2 colour= yellow)?
- so I know how to make a duotone image, that's not the problem
- i know how to work with layers and masks
(i try to upload the image.. but server seems very busy...)
I am having trouble with a spot color image that I am trying to create in Photoshop and then import into InDesign.
In Photoshop, I've created my spot color channel, selected the Pantone color, pasted a greyscale version of my image into the spot color channel and removed all information from the CMYK channels.
Since my spot color channel is full of various greys, I was expecting to see a full range of TINTS in my image. But for some reason it doesn't look anything like the way I expect it to.
When I choose the same Pantone in InDesign and apply a gradient from 100% to 0% tint, I see a full range of light and dark blues. But in Photoshop everything looks grey-blue.
I thought maybe there was a difference between how the two programs display the color, so I imported the Photoshop file into InDesign anyway. But it still looks grey-blue just like it was in Photoshop.