I draw a rectangle and color it to M40Y80 in CMYK. Then draw Circle color radial fountain 80% Black & white.
Then apply Uniform transparency. Now I got problem in printing also & while making CMYK jpeg also same problem. If I convert to Bitmap CMYK same problem. but if you convert to RGB it look OK & then you have to convert to CMYK.
I am unable to solve my problem with exporting an object (curve) with 2-colors fill (with transparency) to WMF, PNG or AI. I spent quite a long time already to figure out how to make transparent fill and when I finally succeeded, I cannot export that and work with it
I would like to transform the curve with transparent fill to just curves somehow... than it should be no problem with exporting. Or transform it to some other vector object - it does not matter - just to be able to use it and export it as vector object.
I have a curve fill with K100 and 50% transparency placed on top of a solid color background. [TOP]But when I turn the proof color on, or export as CMYK JPEG, or PDF, the result is as below. [BOTTOM]
View 6 Replies View Relatedcould somebosdy please explain the diff. between linear dodge/color dodge and the linear burn/color burn settings of the brush tool?
View 1 Replies View RelatedIt makes very serios color shift. how can I prevent this.
View 5 Replies View RelatedI was reading one of techniques for removing blue haze from pictures.The initial two steps were as follows:
1. Click on your color burn layer 2. Select all and copy the color burn layer only to the clipboard
I have never used "color burn layer". So what "color burn layer" is and how to create it. how to creaste color burn layer.I have photoshop CS5 (with Windows 7).
I get to use Photoshop CS3 from time time and I recently found a problem:
I want to Color burn 2 Layers, yes I know how it should work but it does not.
I got 2 Gradients, one is somewhat red to white and the other one is grey and white mixed in a strange way (I'm just experimenting).
I got these two layers, and as soon as I create the Gray-White gradient, the whole painting is just like the Gradient and not the Color burnt with the other ones. So it ignores the mode "color burn" somehow.
With the burn tool one can use it several ways. The direct way is to just click on the tool and select whether you want highlights, mid-tones, or shadows. Each option changes the burn shade slightly. Also there are a host of blend modes which again changes the burn shade.
One can also create a burn layer and change blend modes, all with different effects. Then you can also use the brush tool and select color burn or color dodge, with the foreground color changing the shade of the burn.So all of these options give a great deal of control, but frankly I am just burned out on the process.
All I want is to have the burn deepen the color to more closely match the color in the shadows of the picture. It seems to work better on flesh and soft colors than on bright colors. In those cases I give up and resort to a brush in normal mode with color selected by eyedropper. But that can make the image more muddy as it covers up rather than intensify.
So wilh all the man-years of experience out there is there a more simple way to get the correct burn shade than going though 49 different variations? Or should I just stick with the brush and use a different blend mode?
In CW, is there any way we want to check whether the color are legal/over burn etc..?I know there a scope indicator but not very sure how it works.
View 2 Replies View Relatedi want to set a color as transparent. the help file says that there is a Map Transparency button in the color palette but i just can't find it. in my color palette, there are only three sliders for R, G and B, another slider for colors, and the two squares showing foreground and background color only. where is the map transparency button?
View 2 Replies View RelatedSpecifically when I lasso a section of a screenshot and move it, I would like to leave behind a chosen background color in its place. This was easy in Paintshop but I can't figure out how to do it here. Instead, I seem to have to grab another selection, copy it and put it over the transparent part. Simple enough to do but cludgy. Looked at the manuals and couldn't find a mention.
View 2 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedAny way to simply remove a color by replacing it with a transparency? More specifically, the background of my image is solid black but the object itself is a little too intricate to cut out via the selection tool.
View 1 Replies View Relatedaware scaling in CS4.
enlarged the canvas size.
His canvas extension color was grayed out in the dialoge box and the extension color opened as transparency.
I have 60-something 24 bit PNG images that I've edited in Gimp, many of them include transparency. I want to batch convert them to 256 colors while keeping the transparency. Can this be done? I did try it in another editor and any attempt to keep the alpha channel transparency resulted in totally washed out colors and transparency where none should exist. Conversely, if I skipped the transparency the color depth reduction went well.
View 6 Replies View RelatedI have an image with a black background and an image in various shades of grey. I would like to, i guess, "invert it" in such a way that black becomes white, and the various shades of gray become transparent. Basically I want to have the following:
Black -> White with 100% opacity - totally white
Grey with 10% black -> White with 90% opacity - white with a bit of transparency
Grey with 70% black -> White with 30% opacity - white with a lot of transparency
White -> White with 0% opacity - completely transparent
How can I achieve this?
I have some shape files that data connected to my drawings and shown as a solid color polygon. I set the foreground transparency 40% in order to see the USGS map on the background. But When I print out, it print out as a solid color, not transparency.
How to work with a solid color shape files so I can see the USGS map when it prints out.
This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
View 3 Replies View Related I was using Paint.net but I've found it too limited. The GIMP has much more power and I can do a lot more with it, but I've found a few things I can't figure out how to do.
For example, when I use the Eyedropper tool () to choose a color, GIMP doesn't seem to include any transparency in the selection:
The Colorpicker just chooses the color at 100% opacity. Is there any way to change this so that my new foreground color includes the transparency level?
I am beginner in Draw, and i could not find a way to add more than one transparency
on the same object in corelDRAW X3, it is no problem in corel PHOTO-PAINT.
So how do i do that?
I just tried the pdf export of a multipage document. When I open it in Reader or Acrobat I see a grid where the page is not covered (transparency grid?). It has nothing to do with the Reader feature - the grid is in the pdf (I can see it with Pitstop in wireframe mode). Can't find where to turn it off.
View 16 Replies View RelatedI keep trying to print an inkjet on an wide format Epsom and I can get it to lay down heavy ink. I can print it 13 but not in 15.
View 8 Replies View RelatedI'm using CorelDraw X5 Home & Student edition and cannot find the transparency tool. Does this edition support transparency?
View 1 Replies View RelatedI'm using X5 and trying to save a PNG with a transparency mask. Everytime I save or export, I get the white box around it. I read a few posts that talk about a "masked" option check box, but that is not on my PNG save dialog box.
View 2 Replies View RelatedIt looks as though my transparency object is locked because I am trying to edit a bitmap file and I don't get the checkered background behind the object.
View 2 Replies View RelatedI have imported a number of raster images into a drawing and wish to turn the "blank" bits transparent. I can set them all to "Background transparency = YES" in the Properties bar, but as far as I can see I need to go through each one individually to set the relevant transparency color, since as soon as I select more than one tile the "Transparency color" tab disappears.
Is there a way to do a multiple select as the "blank" color is the same for all the tiles? I'm planning to use a lot of tiles and this will be incredibly laborious and inefficient otherwise. I am using Map 3D 2011.
as an alternative to using the magic wand to remove a color to transparency (which leaves fine detail, say in a line drawing, in a very sorry state) i saw someone use the multiply function in layer options to remove all white from a greyscale image leaving black lines over transparency. neat,
View 2 Replies View RelatedIs there any way to apply transparency to a color when using the recolor artwork box? I am dealing with a lot of puppet warp and gradients so it would be nice if I could use the recolor artwork box, instead of looking for all the colors manually.
As you can see from the screenshot, there is a lot of colors to go through.
How do I custom change the Canvas Colour? I don't want to use Transparency Grid hacks, I want to custom change the canvas colour so that it suits my other works.
btw, who forgot to implement the use of Illustrators colours into the transparency grid feature, leaving it using the Mac OS X UI colour pickers is a bizarre choice.
I have been having an issue with the Lens Transparency effect and bitmaps . When I apply a square lens transparency over a square bitmap and group them it looks fine on my screen but parts of the final image are always missing when I print . I have duplicated this error a number of different ways and with two different video cards . I am running XP and have 3 gigs of RAM .
View 5 Replies View RelatedSo I'm creating some interface elements in Draw, and the shadow transparency blend settings always go out the window when I try to export my art as any type of bitmap. It just flips back to "Normal" regardless of what I've set it to be. Is this a known issue?
View 14 Replies View Related