CorelDRAW X6 :: Print File Information
Jul 10, 2012
This is new in X6. The "print file info" option when selected has now 4 lines of information on the lead edge. The line 4 is very close to the page edge. So what ? In commercial use this can to problems, where in previous versions the "Print file info" was in three lines at the top and one line at the bottom and a good distance from the page edge. This info is out-with the page size when using crop marks.
The question is: can this 4 lines of page info be edited down back to 3 lines or be moved further away from the page edge?
View 6 Replies
ADVERTISEMENT
Aug 26, 2011
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
View 4 Replies
View Related
May 20, 2011
Why, if a file is 11MB, would the print file be 90MB?
View 10 Replies
View Related
May 2, 2013
just trying to maximise efficiency of my workload by having Illustrator print the File Information as the Artboard name.
At the moment I'm having to label the work itself which I don't want to do. I needs to be an addition I can add for referencing so other people don't confused.
View 1 Replies
View Related
Feb 15, 2012
I am not able to print a file from CorelDraw X5? When I go to, "Print" the file is automatically saved as a .prn, print-to-file.
Would it because I don't have a commercial suite?
View 1 Replies
View Related
Sep 23, 2011
I have a rather bizarre issue within AutoCad when printing.
This is affecting multiple people, using various machines (all the same model). It is happening when they print to multiple printers, and also when they print to PDF.
They are losing some information. The drawings themselves usually look ok, it is some of the extra data. This can be in the footnote information in the corner. This can be data within the actual drawing. It is not a guaranteed fault, and affects them all intermittently.
View 2 Replies
View Related
Jan 5, 2012
CorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
View 2 Replies
View Related
Jun 16, 2011
I use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
View 1 Replies
View Related
Oct 30, 2012
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
View 1 Replies
View Related
Nov 28, 2012
I have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
View 10 Replies
View Related
Jun 1, 2012
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
View 2 Replies
View Related
Aug 8, 2011
I have been using CorelDRAW to PDF's with vector information to DWG's. It is not something I do often so it was fine. I got a few more PDF drawings and decided to try the converters available. These are the trial versions, but the output seems to be worse than what I get with Corel.
View 7 Replies
View Related
Apr 25, 2012
My Corel software sometimes exhibits a kind of glitch where a text element won't show up just after I've created it and most of my fonts disappear. If I go to wire frame view I can see that the text is there, it's as though the text is just white, but I can't change the color to anything else. I can change the font, but I have to do it blindly because most of my font list disappears.
View 5 Replies
View Related
Aug 16, 2012
I have a problem importing text information from shp file to dwg. Using a command “Add to Map” I can see that shape file consists of Map Feature(s) objects and under Feature Properties there is an information that I need to move to Autocad environment (IGDS_TXT_;TEXTSTRING; TEXT_ANGLE). I’ve tried “mapimport” command but in result I’ve got only acad point objects with no information in it.
View 3 Replies
View Related
Nov 19, 2013
When I export an .las file, I loose the contents from the description column. Is there a way to retain this information? I periodically update a drawing prepared by a different department that includes up to +500 layers. I would like to include descriptive information as part of the layer state that includes directions how to change/modify individual layers. Can this information/tags be saved directly in the .las file? Is there a different method to do this, short of preparing a separate spreadsheet?
View 0 Replies
View Related
Sep 24, 2013
if there is a way to get detailed file information. I'm teaching a course this quarter and need to review about 300 dwg files/week for homework and labs. Obviously, cheating is a major issue (copying other files). Students are getting a bit more clever and can get around windows data (accessed/modified/created stamps). I think AutoCAD has more detailed information related to the dwg file that I can extract to compare files.
View 8 Replies
View Related
Feb 26, 2013
Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
View 3 Replies
View Related
Jul 5, 2012
Windows 7. AI CS5
It appears that Illustrator is no longer keeping file association information with my placed images. If an image is linked, it works fine. However, embedded images have no File Location and simply say its "Embedded" (No file associated with this image).
I understand that this is correct for pasted images. But I have tried both placing an image with the link box, and changing a Linked image to Embeded.
I am not sure when i noticed this change, but its been some time now. Trying to figure out if its related to the AI version, the OS version, or what.
This is not isolated, since all the art stations here (100 or so) do the same thing. And I am pretty sure I noticed this when we were on Vista as well..
View 13 Replies
View Related
Oct 3, 2012
I have an AI (bundled in CS6) document that has a large number of objects in it - approx 200. Single artboard, single layer.
These objects (right word?) are a combination of placed .png files, polygon/primitives (mostly circles) and text labels. I would like to quickly create and export a .txt or a .csv file that has the following coordinate and size information about each object in the AI document:
Pos (x,y)
Size (w,l)
Is there a menu feature? If not, is there a suggestion for a script? Would like to save a day's work going object by object and manually transcribing this information into a text file.
View 3 Replies
View Related
Jun 21, 2012
I'm trying to extract the channel information from a .psd file in binary mode. I'm able to extract the number of channels and their names, but not their types (I mean if it's a spot color channel or a mask). The documentation I've found is from 1997 and some things are not the same with the newest versions.
View 9 Replies
View Related
Apr 19, 2007
I'm taking some photos for my portfolio, when I'm done tweaking them in PS, I go up to the title bar of the document>right-click>File Info, then I'll add my necessary info.
Rather than doing this every time, I remember reading or watching a tutorial years ago about importing copyright info automatically into the photo's "File Info".......
Does anyone know about this? Cause I don't remember how the heck to do it!
View 3 Replies
View Related
Aug 8, 2012
I have an aerial image in TIFF format.Can I get DEM information from this format? If yes, what should I do?
View 3 Replies
View Related
Dec 29, 2013
Is there any way Lightroom 5 can save the information from my Nikon Cameras RAW file.
When I open my RAW files in Lightroom 5 all my camera settings are not saved.
Is there some way around this.
View 5 Replies
View Related
Aug 26, 2011
We usually create our assemblies and parts by modeling up solid bodies in one part file and using the make components command to create the individual parts and assemblies. I would like to either use properties or parameters in the initial part file to put in project information and have it carry over into the individual parts after using make components. That way the drafter has to put the information into one file and not 100+ when all the part files are made. I would love to do it with text type parameters but unfortunately haven't been able to do this since you can't export them (unless I am missing something). The end goal is to be able to put a parts list on a shop drawing grabbing the assembly but pulling custom information from the parts and trying to minimize the amount of work the user has to do by going in each part and adding the information.
View 2 Replies
View Related
Jan 17, 2013
If I were to work on a file and proceed to close it and then re-open it with the intent of undoing or recovering information, is there anyway to do this?
It may be useful for me and others to know if there is a way round in case this does happen.
View 9 Replies
View Related
Jun 27, 2012
I have to pick up the Iproperties information of each .ipt file into SQL Server. But I don’t know how to write a programming with VB.NET to acquire the Iproperties information without opening the file.
View 2 Replies
View Related
Sep 23, 2013
How can I save my picture with the border information to a file? I want to be able to my picture with the border so that I may paste it on my FB page and other places. I am using Elements 9.
View 7 Replies
View Related
Feb 26, 2013
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
View 7 Replies
View Related
Sep 4, 2013
I have CorelDraw X4... I created a design like I always do, but I can't print. All the "Print" options are grayed out and won't let me use them.
View 4 Replies
View Related
Sep 30, 2013
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies
View Related
Jul 4, 2011
I have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
View 9 Replies
View Related
