just trying to maximise efficiency of my workload by having Illustrator print the File Information as the Artboard name.
At the moment I'm having to label the work itself which I don't want to do. I needs to be an addition I can add for referencing so other people don't confused.
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies View Related1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
i have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
This is new in X6. The "print file info" option when selected has now 4 lines of information on the lead edge. The line 4 is very close to the page edge. So what ? In commercial use this can to problems, where in previous versions the "Print file info" was in three lines at the top and one line at the bottom and a good distance from the page edge. This info is out-with the page size when using crop marks.
The question is: can this 4 lines of page info be edited down back to 3 lines or be moved further away from the page edge?
I have a rather bizarre issue within AutoCad when printing.
This is affecting multiple people, using various machines (all the same model). It is happening when they print to multiple printers, and also when they print to PDF.
They are losing some information. The drawings themselves usually look ok, it is some of the extra data. This can be in the footnote information in the corner. This can be data within the actual drawing. It is not a guaranteed fault, and affects them all intermittently.
I use Sheet Set Manager to create and output sheets. Typically I will setup the pages to 24x36 and set to output to our HP.
If I want to output to 11x17 pdf, I use a page setup override and it works fine.
What I would like to be able to do is add a watermark -- using transparent text -- that says "Not to Scale" across the print when I use the page setup override.
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
I have a big artboard with a simulation of a webpage, and a smaller artboard within it, where I'm designing the artwork, so that I know how the big picture will look. In the end, I intend to export the contents of the small artboard. The problem is that whenever I click by accident on the small artboard, my view of the web page gets off-centre.So in short, If I could just lock the small artboard, that would solve this annoyance. For now, I have two options: either delete the artboard and set it back in the end (it's got to be perfeclty positioned though) or, quite practically, just create a custom view with a shortcut that I can use instead of the "Actual size" one (Cmd+1).
View 18 Replies View RelatedI have a AI CS6 file with 16 artboards. I need to 'save for web" a jpg of each artboard. Is there a way to automate this, by setting up an action - or is there any way to do this? I'll be having to do it frequently.
View 16 Replies View RelatedI have a bunch of artwork that I need to fit to artboards that need to be the same size, basically I'm looking for something similar to "Fit to Frame" in Premiere/After Effects.
View 5 Replies View RelatedI'm designing some business cards, which have an 1/8" bleed, along with elements that hang outside of the border of the card. Is there a way in Illustrator CS3 that I can say, "hide everything outside of the Artboard" so I can see what the finished product will look like?
I know I could print them out or output to PDF and see it without the non-Artboard items, but these approaches seem clumsy and labor intensive. I'd like it if I could have some sort of "cropped view"--where everything not on the Artboard is hidden--to work in.
I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
I am struggling with the "sAIArtSet->MatchingArtSet()" in restricting it to find the artset from the selected artboard only.
One way is to iterate through the found art set and compare art's artboard index with the index of the selected artboard. Wanted to know if there is some internal SDK suite which does this iteration in a more optimized way ?
Illustrator cs5 will not export to artboard, even though the artboard is properly set and "Use artboards" is clicked in export dialogue box.
Bleed areas are set and crop marks, all of which print fine. But I want to export to jpeg just to see how the cropped output will look.
I have tried googling this and am able to save each artboard as a jpg but not as an eps or ai file.
View 6 Replies View RelatedI need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border?
I figured it out. View > Hide Artboards.
when I try to rearrange artboards most of the content doesn't move with it.How do I change the content to be associated with a specific artboard?
View 3 Replies View RelatedI've been searching everywhere for a script or plugin that will shrink the artboard to fit the content. Fireworks has a feature like that.
View 32 Replies View Relatedis it possible to make a new document and instead of having it shaped like a rectangle/square, to have it shaped like a octagon? I'm making a square shaped business card, but I want the right side of the card to have a zig-zag pattern cut out on it.
View 2 Replies View RelatedI have setup a display panel with 4boards at various sizes. (Spreads). I now need to make a PDF but as artboard spreads as this is needs to be shown like this for sign off.
Illustrator cs6
When saving for web or exporting an artboard is there any way to pre-populate the save file name dialog box with the artboard's given name. It would save having to re-name the file and make good use of that metadata.
View 4 Replies View RelatedWe currently use CS3 in our Art Dept at the sign company I work for. Sometimes designing/layout for some projects can be a pain when they go beyond the max artboard size constraint in CS3. This is especially true in my dept which does all the large format digital printing. I find myself having to switch back and forth between some of my sign software, which has almost limitless area for design and layout. Not that we can't work in scales but life would be so much easier if we could do things in full scale. Now to the point, does CS4 have larger artboard size than CS3?
View 7 Replies View RelatedIs there a way to size without Illustrator CS6 rounding up? example, I need my document to be 3.625 x 2.125" to output a file to a printer and illustrator keeps rounding up to the third decimal 3.63, Is there any way around this? I found going back to CS3 works but all my files have conversion issues opening that far back.
View 3 Replies View RelatedHow can I set the units of my artboard to cm instead of millimeters when I want to resize it?
View 2 Replies View RelatedI am on a pc (windows 8) using illustrator cc and trying to save from an .ai file to an .svg file. I've also taken a previously saved svg and manually fixed the artboard, then saved. Still resizes the artboard. I've done this multiple times with sucess, but after updating the software last week, the artboard is expanding when I save. I thought I must have changed a setting, but don't think so. I've read lots of posts and tried all kinds of settings but here doesn't seem to be a solution out there. Wish I could go back to the older version!
View 6 Replies View RelatedThe first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints. This is a screen shot of my AI document which has 2 pages.
When I save as PDF, this is what the file looks like:
(Pg 1)
(Pg 2)
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine.
Is it possible to display metadata as text on an artboard?
View 2 Replies View RelatedIn CS5, if you hold the ALT key (on windows, not mac) while resizing the artboard, it will scale from the center... creating an even width reduction/ increase on either side of the page. Why was this behavior removed in CS6?
View 4 Replies View RelatedHow to re size the canvas ? (i am not asking about the art board, but the canvas).
View 1 Replies View RelatedI am setting up an artboard 7 x 3.375. When I enter the 3.375 Illustrator changes it to 3.38. Is there a way to change it so it keeps the exact dimensions I entered?
View 5 Replies View Related
