I would like to be able to move different tool order around under the selection window. IE: Freehand tool - I would like the three point curve tool to appear right under the freehand tool rather than on the bottom. This would be a time saver for me - how do I accomplish this?
View 2 Replies
I am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies View RelatedWhenever we use measure tool it will show the a dialog box with valves of x,y,z, delta X, delta Y & delta Z. I want to customize the same as per the attached image.
Customize this, dialog box will not disappear(modal) after entering into any other command so no need to remember the values of x,y....etc.
I'm having some trouble touching up a damaged photo. I have color corrected first then cleaned up with neat image. Everything looks fine until I try to clean up the spots with the clone tool. It's desaturating the photo leaving white spots.
I think it may have something to do with the layer placement so I drag the most recent to the top leaving the color adjustments below and I'm not having any luck. I've even merged the layers thinking that would help:O
Am I making color and noise corrections before I should be?
I'm tyring to use the 2d Interactive Placment Tool without success. I can see the red box, I can see the arrow cursor and when I click I see the little arrow and box, but when I use the mmb nothing happens. I've seen a video demo and it works there, but when I try it no joy, very frustrating.
I drew a shape with the bezier tool and filled it in with the planar tool resulting in a shape that the Outliner calls a PlanarTrimmedSurfaceShape - I can see the texture, but it's wonky.
Every time I open up GIMP, I have to reposition the Tool Options menu that's all the way to the left so that I can see the menu options at the top (File, Edit, etc.), and I also have to move around the Layers menu as per my own preference.
Is there a way to pin them to a specific spot in GIMP and save them there so that every time I open GIMP they're in the same position as where I left them at?
I have recently started working with CorelDRAW Technical Suite X6. I am trying to figure out if there is any way to customize the Workspace, change the color of the entire background like you can do in autodesk autocad? Are there any plug ins I can download for different menu bars or completely change the layout of everything?
View 10 Replies View RelatedI have been using corel since version 3. Had every version up to 11. Just upgraded to x5 and noticed that when I wrap text to a curve I no longer have the 2 text options I am used to.
text orientation
text(or vertical) placement
All x5 seems to have is text orientation. I have looked everywhere for vertical placement. Is it in x5 or is it called something else now?
Is there a way to easily and quickly extract all commands listed as well as the icons? I hate pressing F8 at startup!
View 1 Replies View RelatedI'm using Inventor 2014.
I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.
However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."
i am redrawing an image and used guidelines to insure straight lines. the problem i am having is when i try to put a node on the intersecting lines, it jumps away from where i have placed it. i do not have any of the snap items turned on and am not using a grid in the background. Why will the nodes not go where they are being place? i have been using corel for years and have not had this problem before.
View 8 Replies View RelatedI'm getting a weird underline placement on SuperScript text. It should be right up under the "99". Can't change it, even if I use the Node Edit tool.
View 12 Replies View RelatedIs it possible in CorelDraw X5 shifting of multiple pages placement at once. For instance if we have a file of 50 pages (1-50) and we require shifting of page nos 41-48 with their contents after page no 8 than how should we proceed to get the resultant.
View 3 Replies View RelatedPan tool is not working with Eraser tool?
View 8 Replies View Relatedi just turned 17 so im looking at cars and i want to see how they would look with tint and rims. if someone can help me i would really appreciate it. basically what i have to do is erase the previous rims and put on the new ones on top and i have to resize the rim perfectly, etc.
View 1 Replies View RelatedI had this new script which is used in Unwrella2 so I placed it in the user interface as a new button in the tool bar, the problem is it has no icon so, I wanted to customize one for it. I start searching tile I found how to and I followed the description..I customize a button icon 24*24 it had to be *.bmp 24-bit(I also found that to have an alpha channel it has to be 32_bit 8red 8green 8blue 8alpha) or 16 bit it must contain an alpha channel which I did all of this I even toke one of the original ones from the UI folder and I customize it then every time I copy the new button in icon folder and restart max 2012 and go to “edit button appearance” and search for the new button nothing there I named the new button right “group-name”_24i.bmp but still the max 2012 don’t want to read it.
in the image attached a button icon which should give me a new group called Unwrella with two buttons. I even found some original buttons which is split in two file (file *_24a.bmp contain the Alpha as RGB) and (file *_24i.bmp contain 24_bit colored RGB) I even tried this but still max 2012 don’t read it.
I just got PS after using Paint Shop Pro for years, and since I'm so adjusted to the PSP tools, I'm wondering if there's a way to customize Photoshop to what I'm used to. At the moment, this means reversing the direction PS zooms when I scroll the mouse wheel, and also getting it to actually ZOOM whenever I do this, rather than scrolling. Is there something I can do to tweak these settings?
View 1 Replies View Relatedmake CD labels with Photoshop?
I'm trying to make full face labels (that go all the way to the hole), but I can't even find any label maker software that offers this. I don't know of a way to make anything but quadrilateral images in Photoshop.
I just purchased CS4 and I am trying to set up the bridge screen to my specifications. On the left hand side of the Bridge screen there are several tabs near the top of the screen (e.g., favorites, Folders) and also mid way down the left hand side of the screen (e.g., Filter, Collections). On the right hand side of the screen, there are tabs only at the top of the right side (e.g., Preview, Metadata). How can I place tabs mid way down the right hand side? Every time I try to grab a tab and move it down on the right hand side, it just pops back up to the top.
View 7 Replies View RelatedI'm finding that setting up views on a sheet is a bit cumbersome especially when creating a sheet with a lot of views. For example, I'm creating casework details & elevations and our firm's stardard is to basically set up a grid on the sheet to frame each detail drawing. The process I've been using is: 1. Place the view on the sheet, 2. change the viewport to a modified template that simply changes the text and gets rid of the default # & circle title. 3. I then have to realign the title text with the view. 4. THEN I essentially draw 2d linework to create the view frames on the sheet for each detail view.
This just seems like a cumbersome process for a program that's so intuitive. I would imagine/HOPE there would be a way to change the default for when I place a view on a page. I'd like the views to automatically show the view frame/border when they are placed on the page and then I could simply manipulate the frames to fit each page.
If there's no way to really change this default then I would imagine it would be better to change our office standard to save time. Below is a pic to show our standard sheet layout.
How do I go about customizing the Inventor 'Welcome Page'?It looks like a simple enough HTML page in disguise, so I'm assuming it can be customized.
View 4 Replies View Relatedusing custom workspaces in Illustrator CS5. I already have a custom workspace that works just as I like, but I accidentally move the panels off of the sidebar nearly every day. Is there a way to lock the panels in place so that I can still open and close them (I use the icon view) but that will not allow me to panels?
In addition, I use Pantone colors on a regular basis and I would really like to be able to keep the swatch color book on the sidebar at all times. I've read before that checking "persistent" is supposed to keep the color book open, but each morning when I start the software I have to reopen the color book (and persistent is still checked). I'd like to be able to save the Pantone color book as part of my custom workspace, but I have tried several times with no luck. How to save the Pantone color book as part of my custom workspace?
Someone just emailed me that she is "suddenly" able to customize the Layers palette - she even included a screenshot! How to do this???? I can't, no matter what I try. I have PSP X4 14.1.0.5 - the last drop given to us during beta testing, with the sp1 patch applied.
View 3 Replies View RelatedI am customizing context menus and on the customize menu there is, on the left, Application Frame Menus, then under it says, Show Menus for: the only one that shows is Default Menu. How does this work or change. Can I put a custom menu there. It never changes and how to use it.
View 3 Replies View RelatedHow can I customize the title block where it says Drawn, Checked and approved?
I want the dates with initials to place automatically. However, I want the date of approval and checked to be 2-5 days after the drawn date. (using Inventor pro. 2012)
I would like to create a pull-down menu so that everyone can select a specific client and have all of the client specific settings be automatically set up like template file location, client block libraries, etc.
We have a lot of users with varying amounts of experience and have had trouble with people using the wrong templates, blocks, etc. Is there a list of key-in commands where I can find what I need to add into the .cuix file? Is there an easier way to set up client standards without forcing users to use a specific workspace?
how do you do it using PHOTOSHOP?
View 1 Replies View RelatedI've been collecting all kinds of small cards and tickets. Like those that are clipped to a new set of jeans, or a ticket for a bus fair from vacation. Small pieces of paper that tell a story.
I'd like to make a poster, an image, out much smaller ones. I don't know how they are called, but everybody knows them. Those smaller images are put together in a checkerboard-pattern. Together they form a big image, that you one see when you take some distance, look between your eye lashes.
My question is: Is there a photoshop-filter that can do this, or is it a stand-alone application? Where can I get it?
I'm a MacOS X user.
Customizing the leader style further,I’m not sure if the leader style can be further customized to obtain the style shown in the attached screenshot.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Our company prefers to call out Sections and Elevations with a letter and Details as numbers. How can I make this happen in Revit? Can it happen in Revit.
View 2 Replies View RelatedACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!
View 1 Replies View Related
