Every time I open up GIMP, I have to reposition the Tool Options menu that's all the way to the left so that I can see the menu options at the top (File, Edit, etc.), and I also have to move around the Layers menu as per my own preference.
Is there a way to pin them to a specific spot in GIMP and save them there so that every time I open GIMP they're in the same position as where I left them at?
I'm using Gimp 2.8 with Windows 7 on two monitors. I am unable to find the layers window, or a place in the menus to turn it on or off.
View 3 Replies View RelatedI'm trying to use a gradient to paint with but I don't see the option in my tool options for any painting tool.
I am on Windows XP. Here's a screenshot: tooloptions.png (8.89K)
Number of downloads: 3
Do I have to enable this option elsewhere?
I am running Ubuntu Linux 10.04. On my older linux pc GIMP included a menu option I think to access Layers, might have been Dialog --> Layers, I don't remember. This version of GIMP has Layer --> New Layer, but it's not immediately obvious in looking through all the menu bar options where to get to a Layers dialog where I can move layers, rename them, etc.
View 2 Replies View RelatedGimp in Linux (Mint 11), I've customised my toolbar layout and am happy. Gimp remembers my settings and things tend to be fine.
Every so often, however, Gimp loses my colour palette (palette editor), forcing me to add it again. And it's always my colour palette (palette editor).
Why does this happen?Attached File(s) Screenshot.jpg (53.72K) Number of downloads: 5
I've used Gimp successfully for a couple of years—but now it’s usable. I can’t adjust the size of the brush, paint, eraser or use other functions because below the tools palate all I see is “You can drop dockable dialog here” and every function that used to be in that space is gone. I’ve tried uninstalling and reinstalling and it stays the same. How can I bring back all the functions?
View 4 Replies View RelatedI use GIMP for painting, pixel art and general image editing, and have batch files set up to run GIMP with the appropriate sessionrc and gimprc parameters, as well as to copy and save all other [...]\username\.gimp-2.8\*rc files.
However, whenever I use one setup and then another, my tool options are all messed up, and it's rather aggravating having to reset them every time.
I have used GIMP before, uploading artwork I created from it on to deviantART. However, this has been quite a while ago, back when it was GIMP 2.4 or so.
I recently just got a Wacom Bamboo tablet though, and wanted to get back into making art. I redownloaded GIMP (this time version 2.8) and while I am very satisfied with the update, there is one thing that has bothered me.
I'm not exactly a fan of the new format for the tool options of the brushes from how they used to be.
Basically, I prefer to how the tool options for the brushes were for GIMP 2.4 over the updated 2.8. Is there a way I can keep version 2.8 with the slight adjustment of having the tool options formatted the way they were in 2.4?
For me it's more of an inconvenience adjusting the brush size and whatnot, and I'm so much more used to how it was formatted in older versions.
I don't know if this is the right name, but my options for cropping, moving, my wand, etc, have disappeared on me by accident. I don't know how to get them back in their original place. Here's a screen shot of what it looks like now. (It's the window that usually stays on the left of the screen, I think for most people. )
[URL]........
Everything , my options, are gone and replaced only by the airbrush tool.
Due to a catastrophic failure on my PC's part, the BiOS needed to be reset, and I effectively lost my irreplaceable copy of CS5 Extended. Since I do not have 1,000 dollars, and I NEED to be able to do graphic design, I'm putting all my faith into Gimp at this point, hahaha.
I just downloaded the GPS package for Gimp so that I could make photoshop-esque drawings if needed.
Huge problem: I was able to copy all of the folder contents (Brushes, Gradients, Palettes, Patterns) from the GPS package into the Gimp respective folders EXCEPT for Tool-Options. I'd assume that if I can't install the saved settings along with the package it's pretty much useless.
I've navigated every folder I could find within Gimp, and I can't find this damn thing XD.
While I love digital painting, my current task requires me to be capable of designing a shop sign, business cards, and logos. Is Gimp comparable to photoshop in the typography realm? This will be my first official professional job, so it HAS to look good. So far Gimp reminds me of photoshop elements, which was my favorite photoshop due to ease of use.
My tool options area is tiny; I have to scroll through it and it's horrible. I haven't been able to figure out how to change it.
Screenshot of what I mean here:[URL]
I'm using Gimp 2.6.8 on Windows and, somehow, the Tool Options separated into a new window a week or so ago. I tried docking it back to the Toolbox, but nothing is working.
I googled and found that this is normally fixed by dragging Tool Options onto the Toolbox, but there is nowhere for me to do that. Is there some trick or maybe this is just a bug or something? Nothing seems to work and the separate Tool Options window is incredibly annoying.
My 'Tool Options' Box has always been on the left of the screen - at the bottom of the 'Tool box'. I clicked on something yesterday while using the Tool Options Box and somehow moved it. There is now a message there that says 'You can drop dockable dialogs here'. I've tried various things but can't get the Tool Options box back. It's lurking underneath the main Tool Box. I can drag it out and use it, but afterwards it hides again. I know this has to be a dead simple problem but I just can't seem to correct it.
View 2 Replies View RelatedWhen I choose a tool, the value(like Brush size, Opacity...) in "Tool Option" often become blank.
By the way, if I drop the "Tool Options" out of the "Tool Box", the values appears.
Another problem already! My tool options dialog box is greyed out and will not respond; won't allow me to choose options.
I clicked it off and brought it back (via windows, etc.) but it's still grey and nonfunctioning.
How can i make it work?
on osx 10.7.5
new gimp 2.8.2 (for mac)
toolbox is one long list with toolstoolbox preferences tool options window is only some pixel wide.no way to adjust size of toolbox no way to adjust size of tool options window
how to use gimp again with tool options open?
It seems that I've somehow "hidden" all of the extra options for any given tool in the Toolbox in GIMP (in 2.6, but I'm having the same issue in 2.8). I'm quite baffled as to what I did to cause this issue. URL....
View 2 Replies View RelatedWhy will dock tool option not dock back to toolbox? I am using 2.8.
View 4 Replies View RelatedI can't get the Tool Options dialogue box to re-dock to the toolbar. I've looked at a few other threads, but they haven't worked. I'll attach screencaps if I need to.
View 6 Replies View RelatedI would like to be able to move different tool order around under the selection window. IE: Freehand tool - I would like the three point curve tool to appear right under the freehand tool rather than on the bottom. This would be a time saver for me - how do I accomplish this?
View 2 Replies View RelatedI'm having some trouble touching up a damaged photo. I have color corrected first then cleaned up with neat image. Everything looks fine until I try to clean up the spots with the clone tool. It's desaturating the photo leaving white spots.
I think it may have something to do with the layer placement so I drag the most recent to the top leaving the color adjustments below and I'm not having any luck. I've even merged the layers thinking that would help:O
Am I making color and noise corrections before I should be?
My Daughter was doing homework on my office computer and somehow deleted my leyers tool on the right side. I have reinstalled Gimp 3 times ...and the only ones that appear to be fully working, are on all the other users, but mine .
how do I get the layers tool to reappear ?
I'm tyring to use the 2d Interactive Placment Tool without success. I can see the red box, I can see the arrow cursor and when I click I see the little arrow and box, but when I use the mmb nothing happens. I've seen a video demo and it works there, but when I try it no joy, very frustrating.
I drew a shape with the bezier tool and filled it in with the planar tool resulting in a shape that the Outliner calls a PlanarTrimmedSurfaceShape - I can see the texture, but it's wonky.
I can't seem to get the Layers dialog tool set back up and visible. I have uninstalled and re-installed and it still is not visible.
I have downloaded the latest version from cnet.com - 2.6.11. How do I get it back?
I'm using Inventor 2014.
I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.
However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."
I found out you can add your own "commands" to the right click menus. So on the default menu I have added a block that we use a lot, that way I don't have to go to the tool pallet or to the ribbon to get it.
I am getting it to work just fine, mostly. I have gone into the CUI and added a new menu under the Default Menu. I then changed the name to Variable Box, the command name is My Box Thing (this is all testing names), the macro is
^C^CSNAP;.025;-insert;C:/Users/rmock/Documents/BLOCKLIST/VARIABLE_IO1A.DWG;;;;-la;s;av-detl-medm;;-insert;C:/ ACAD_ Library/_ Blocks/wiring_ diagrams/ equipment_ID;int;;;;\;;;layerp;layerp;
The variable_io1a file is where the dynamic block is at and the Equipment_id is some attributes that get insurted after placing the block. We have a standard layer we put the block on and one we put the attributes on. However when I run/use this shorcut menu item it inserts it on what ever layer is current in the drawing. How do I get this shortcut menu item to go in on the layer(s) it was made with and not the current layer of the drawing. I don't know if this is clear what I am doing or not. Everything works like I want it to, it inserts where I pick, it asks where I want the attributes inserted, asks for the 3 lines of text and ends the command. It just goes in on the wrong layer.
I am having a weird issue whenever I make a selection with the pen tool and right click and make it a selection. The selections (dancing ants) go around the outside of it. I know to hit Shift+Ctrl+I and it inverses it normal.
View 2 Replies View RelatedI can't find any of the menus. There doesn't seem to be an option which enables them either, unless it's hidden. How do I enable the menus?
View 2 Replies View RelatedHow best to take icons from the tool palettes into the ribbon menu ?
I am currently going through the laborious process of moving my company tool palette commands into ribbon format.....it would be great to find a quick way to grab our custom icons from the palette and use them in the ribbon.
After installing Mavericks I´m having so much trouble with the lasso tool and white menus in photoshop that it is really breaking my production speed and causing a lot of problems for me. Especially the Polygonal Lasso Tool, how its auto completing when painting with a tablet.
I´ve upgraded to Mavericks, and I wish I never did that. Because these problems never occurred in Mountain Lion. I´ve tried going back 3-4 steps on the tablet drivers - but no luck. I tried reinstalling photoshop and I've tried pretty much anything I can think of but nothing works. I desperately need to fix this and I have a long line of architectural illustrations coming up and it takes me a lot more time working with masks if I cant do it with a tablet...
Gimp needs the features found in ms paint. Lots of people do pixel art. Just add some new buttons. Specifically the features I am looking for:
-Re-size canvas using border nodes instead of using menus.
-Uncluttered save feature. Remove export completely. The save file list should include all file types. A bmp should end up a bmp. Let the user set their preference to the default.
- an all in one: select, float, move, anchor select tool( with background transparency toggle). For rapid manipulation of simple objects. (the select tool as used in ms paint)
Gimp has the potential to include each and every feature from ms paint. I see no reason not to. The video game market share alone should be enough incentive to take pixel art seriously. Ive tried inkscape and pencil and graphics gale etc. Gimp is the closest one so far.