Corel A.RM. has been popping up and forcing Corel to close. This has been happening at leas once or twice a day. I'm using X6 on WindowsXP. what A.R.M. is and possible reasons why this is happening?
View 6 RepliesI have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedTwice now using PSP X4 I have got a message encouraging me to complete a 5 minute survey. I take the survey, press submit at the end, and get an annoying window to a Corel X4 ad page with no browser controls. The please take a survey message window is still there underneath. When I close the Corel X4 ad window, is asks if I really want to cancel?
View 2 Replies View RelatedI have purchased CS6 and I am having problems with the 64-bit version. After I open it completely freezes and I have to force close it. This happens every time I open it. I have tried uninstalling and re-installing it multiples times. I didn't have this issue with CS5. I am running this on a Mac 10.6.8, Processsor 2.8 with 8GB memory.
View 7 Replies View Relatedafter a bindXref i save the dwg in a path 'Archive' but if the file already exist i demand the user if i cant erase the dwg in archive before write my dwg. I want to force the user to close the dwg without save if the reponse is 'No'. (The function have BindXref so the dwg do not save this). No save only for this dwg not the other already open (I not know how to use event so.. and my DLL is not loading on the launch of autocad)
View 3 Replies View RelatedWhen exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 Replies View RelatedI've got this huge project - a printed catalog - that involves hundreds of product photos, of which the originals are scattered all over the place in different directories, etc. Nobody knows where a photo might be hiding. However, luckily, this is an update of an earlier catalog of the same type, so most of the photos are already there. Unfortunately, many of them need to be "photoshopped" in some way, adding pigtail connectors in place of terminal blocks etc., which is fine.
But, when I try to use the edit bitmap function in DRAW, the photo always opens in a new copy of PhotoPaint, forcing me to then save it separately, adding a name instead of "Bitmap in..." which would be all the 100 or so photos that I will have to work on. I don't have any need to have the bitmap saved separately except that I need to have the various photos that I'm disecting in the same copy of PhotoPaint, so that means I have to jump though all these hoops.
Q: Is there a way to force the Edit Bitmap to open everything in the same copy of PhotoPaint? So that I can simply cut and paste pieces, etc.
I've got a bunch of filled ellipses scattered around a drawing, and I want to place numbers & symbols inside these shapes. But whenever I choose the text tool and click inside the shape Corel is 'automatically assuming' that I want to format as paragraph text, and then it's all over. The only way I can 'escape' the paragraph formatting is to delete the shape & start over.
Is there any way I can temporarily-disable paragraph text, or force the characters to be artistic text?
how do you close a path in x6? i select the two duped lines then go to arrange but no close path option. i did it in x4.
View 2 Replies View RelatedPrint preview shows objects spaced correctly. But when it prints them, it compresses them together on the page (but the objects are sized correctly).
When I print the same file from a different computer on the network to the same printer, the objects are spaced correctly.
Which leads me to conclude it's a setting in CorelDraw on the first computer. Also, I reset all the default settings in CorelDraw using the F8 technique, but that didn't solve the problem.
When using CorelDraw x5 the program seems to just randomly close, with no error message or freezing. It just disappears from the screen and I have to re-open it. I cannot pin point when it is doing it, because it keeps closing upon random tasks, not like it closes every time I try the same thing like saving.
View 5 Replies View RelatedI have a series of complex shapes that look like solid shapes but they are separated. When I try to auto close, the lines shoot all over the place. The open ends of the lines are physically touching or at least very close.
Can you set a tolerance so that two lines touching each other connect?
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies View Relatedwhen i'm going to print may files with 36 layers, corel x5 will close and nothing happen in printing.
note: the file is edited in corel x3 but the printing will done in x5.
Close font.gif
I have a close font but the 'g' needs to be open as in Arial.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View RelatedIn X4 there was the option under the Arrange menu to Close Path with several different options like this.
In Corel X5 this option is absent. Is there something equivalent?
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View Relatedwhat is the best way to close an object consisting of multiple individual lines to enable a fill color? So far I've just been retracing the objects, but there has to be an easier way.
View 4 Replies View Relatedwhen i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
Each time I open a second or third file in CorelDraw x5, the windows seem to lose the top MIN, Max Close icons. You know the ones that sit at the top right of each window. Because of this I'm unable to close or edit the work. In fact NOTHING works. I'm running Windows 7 64 bit with a TON of memory.
View 3 Replies View RelatedSo A client hires a designer to create a vehicle wrap. He does it in Photoshop. If you have not done vehicle wraps before you DO NOT DESIGN IN PHOTOSHOP!!! Anyway, he sends me a link to download a psb file. Another bad sign. Means the file is huge! 1 hr to download. I open it in photoshop (at least he left it unflattened) and reduce it down enough to make a psd with layers intact. I then import it into Corel and begin placement into the vector vehicle template. Once I get all the images fiting nicely I hit save. Come back to it the next day and it won't open. Message says a bitmap is not right "Abort, Retry or Ignore" I try the backup file, same error. I try to move a copy to my hard drive instead of working over the network. No go! Try rebooting, no go! Rebuilt the file agian and saved that version to my desktop. Saved successfully, made a couple changes and then CorelDraw crashes and shuts down. Try to reopen the file and same errors occur.
View 4 Replies View RelatedSometimes this happens when I'm working with photoshop : first it doesn't do anything for a moment because he is processing something (I don't have loads of RAM) then suddenly like 5 help-windows open... I wonder: is there any way to prevent it?: is there a shortcut I must prevent pushing? some settings? It's not that important as I can still do everything, but it is very irritating...
View 2 Replies View RelatedMy asset browser does not pop up when I select it from the drop down menu...
View 6 Replies View RelatedHow can I add shutterstock to correl connect like the Flickt, fotolia, iStockphoto?
View 2 Replies View RelatedWhen selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
In my opinion removing window with paste parameters like size and dpi in X6 was bad decision.
Now I have to remember to make vector objects big enough to avoid pasting them too small in photopaint.
99% of photostock vector files are too small to copy/paste them without resizing.
As webdesigner I can tell that old version of "paste" had better functionality .
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
Corel Capture X6 wont work, i got message then i decide to choose user define but there is no option except shift+ F7 "Dream and never stop dreaming, cause dreams always available for free".
View 11 Replies View RelatedObviously this is a change from CS5 to CS6 and I don't like it. I would like to know how to change it back. When I have a bunch of tabs open in a window and then minimize them because I am working in yet another new window... every time I return to PS6, that minimized window keeps opening up on top of the project I really want to work with. Why doesn't it stay minimized (like it used to in CS5)? Is there a way to go back to the way that works in CS6?
View 10 Replies View Related