AutoDesk Smoke :: Crashes Often While Trying To Access 5D Footage
Dec 17, 2011
As soon as i try to open the default canon folder containing 5d footage, software crashes (spinning wheel, then app exited abnormally message).
I try re-starting wiretap gateway, wiretap server, and stone+wire thru Service Monitor then restarting smoke but that sometimes solves the issue and sometimes it doesnt. And sometimes i see checkerboards.
I tried solving the problem by running smoke with airport on or off but with similar results.I did some search here and gathered that it could be due to a number of reasons (IP address, local host etc) but I dont quite fully understand everything.
I don't have my mac pro networked via any Ethernet cable or anything and don't want to have to keep airport on unless i need to be online.
View 5 Replies
ADVERTISEMENT
Aug 11, 2011
Any way you can take 5D footage and convert it from Lin to LOG?
View 1 Replies
View Related
Nov 6, 2012
I'm using Pre Release 5 for editorial as opposed to conform and I've moved some of my source material to a different drive than I was using when I started the project.
Normally in FCP or Avid, I would just re-link to the footage and that would be that. I know this could be done with footage in the timeline, but what about plain old source footage? I can't seem to find the re-link tool.
View 9 Replies
View Related
Jan 7, 2014
I've got RED footage that imports codec 3.x, RedColor3 and RedGamma3. I'm delivering rec709 but would like to work linearized. Do I just change the color settings to rec709 in the color box and linear in the curve option to work correctly?
View 2 Replies
View Related
Jul 11, 2013
I'm looking for the workflow for Red Footage.
In our facility, we are shooting 4k HD format. Then we can finish our final project as HD.
I installed Red Rocket and the Red Footage as Half premium debayer (1920x1080) playback in realtime at preview window of the "Media" tab.
However, I insert the same clip on the timeline (1920x1080, same as Half premium debayer), smoke automatically puts resizing effect. When I open the effect, I notice this effect doesn't do anything.
View 3 Replies
View Related
Oct 14, 2012
What would be a bonus is at anytime I could go to the timeline and click on an imported piece of footage and tell smoke to Include YUV headroom after the fact of it being imported and used.
View 7 Replies
View Related
Feb 10, 2014
I did a bunch of test fixes on a low resolution version of a project. All using batch.
Now I have the full resolution versions of the clips.
I thought I could drop the Batch set-up onto the new clips and then do an Apply & Scale to the Action nodes inside Batch. But that doesn't seem to work. At least from what I can see, all my gmasks are in the place they'd be if the footage were still smaller?
View 4 Replies
View Related
Mar 6, 2013
I have footage that contains GS footage. I also have a graphic I want to put behind the two. I can achieve this with a vertical comp in my time line and the timeline axis effect. But when I try to connect the two with CFX I get an error and my footage looks wonky.
View 2 Replies
View Related
May 6, 2012
I have a question about conforming material from Abode Premiere CS 5.5..I have a 720@50p source that was converted to Avid DNxHD 10bit 720@50p in Quicktime .mov container, using Media Encoder.Then material was edited in Premiere, cuts, dissolves and etc. Timeline in Premiere is set to 720@25p, because I need to output 720@25p finals.Premiere DOES NOT slowdown shots in timeline, it just plays them skipping every 2nd frame (I thinks so), so it is played in a normal speed and audio is in sync also. In Interpret footage settings nothin is changed - so, it still treats as 50p footage.
Problem is that I dont understand how to conform this footage correctly in Smoke.If I use automatic conform using wiretap import of AAF (same dir as footage is), Smoke thinking about this operation about 10-15 mins and then it creates a 1080@50p timeline where all shots are smaller it's native size and timing is completly wrong. They starts early than they should.If I use Video I/O I have correct sizing but timing issue is still present.
I need to create a project with PAL settings and override resolution to 720p?
How make Smoke to play footage same as Premiere does? Whithout shifting in out points?
View 6 Replies
View Related
Jul 19, 2012
There is an issue with footage that needed the YUV headroom to be turned on when importing.What happens is that when this footage is exported, it get crushed blacks. So there need to be a YUV headroom setting for the export I believe. Maybe I am seeing it wrong.
Footage is MXF Panasonic HPX171 (DVCPRO HD 72025PN) footage.
View 5 Replies
View Related
Aug 10, 2012
I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.
View 3 Replies
View Related
Apr 19, 2013
The client asked me to give them a version of the Final sequence in which the colour of a looping background was slightly different so that they could compare the two. They also asked for two different pieces of music so they could test which one worked better. Before they picked the final version they wanted everything slightly shorter. The duplicates keep piling up.
Is there a way to swap put a shot in a master sequence and have it update in all the other duplicates I have made? How does one keep track of all the sequences in Smoke with all these little changes.
PS. With the audio I put the two music tracks in the sequence and muted one or the other. Dealing with different lengths of a commercial needs me to duplicate and then things start piling up.
View 9 Replies
View Related
Jun 17, 2012
Somehow on it's incarnation to Smoke 2013 a core functionality of editing is lost.
I cannot drag'n drop any footage from the viewer into the TL by F-drag or Pen-tip anymore. This has been working in previous versions of Smoke and makes an NLE an intuitive experience, especially if you are coming from a FCP/PremierPro background. I'm sure this is a typical alpha build loss.
View 6 Replies
View Related
Apr 10, 2013
what is the workflow for making footage broadcast legal in smoke.
I have read different explanations on the web, but still not totally clear on it.
how Brian Milligan creates broadcast safe.
View 2 Replies
View Related
Jul 25, 2012
DSLR footage I need a sharpen node. Is there a way to sharpen in Smoke?
View 2 Replies
View Related
Aug 2, 2012
Is there any keyboard shortcut in Smoke to shuttle quickly across footage (with sound playing) at 2x or 3x speed like you can in Avid/FCP/Premiere etc by double/triple-tapping the J and L keys?
This makes scanning through clips and the timeline so much faster and I consider it a basic essential.
View 8 Replies
View Related
Jun 6, 2013
I have just installed Smoke Ext 1 and tried Keying with Green Screen Footage. The Master Keyer result is not even close. Is it a bug with the Master Keyer?
View 1 Replies
View Related
May 30, 2012
I just want to import some media (and do a conform) via the network. I can see everything, but it won't connect. I also don't get any error messages. I already restarted all components and they all show a green status. I don't know what else to do....
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 5 Replies
View Related
Nov 3, 2012
Is there a way to access the timeline within CFX ( much like in Flame ) ? I see the timing button but this doesn't seem to have the same control as a timeline for a specific clip.
Also, is there a way other then "explode one" or "explode all" to go within a CFX within a CFX ( pre comp ) ? i.e. a setup that is then put within the BG of action.
View 2 Replies
View Related
Jun 14, 2012
I’ve just stumbled across a way to acess the old desktop tools and as an old Smoke on Linux user hope that Autodesk keeps it there.
This is what I did.... Loaded a project, went to keyboard shortcuts and set a short cut for repeat (used to duplicate frames). Now hit the shortcut and you should see all the old desktop tools.
As an aside, why is Change Timecode/Keycode, convert rate in the retired tab?
View 9 Replies
View Related
Jul 6, 2012
just tried to get access to a Flame Framestore via Wire/Network but unfortunatly I only see the Harddrive, not the Framestore.
I would love to load some conformed stuff from the Flame.
Is this not yet implemented or is there some special setting I have to change either on the Flame or SMAC? (SMAC 2013 prerelease on MBpro)
View 2 Replies
View Related
Nov 26, 2012
I think there should be a 'edit cfx' menu when we right -click the clip in timeline. This is very handy to get fast access to the cfx. Yes i can click the small cfx icon/button and RMB - edit cfx , or i can double click the cfx button itself, but this only work when the cfx button is visible. Also there should be a hotkey for this.
View 3 Replies
View Related
Nov 2, 2011
I've been trying to export via the Wiretap Central, but when I try to open the IFFFS folder I get an error message: Unable to access the volume stonefs1: the given volume does not have a corresponding hardware partition.
View 5 Replies
View Related
Apr 18, 2012
I'm receiving this error will trying to export a clip from Smoke on Mac.
cannot access source clip/stonefs 7...
A weird thing is that I don't always get the error message. Sometimes the export works. But, more often it's not.
View 6 Replies
View Related
Oct 21, 2011
I'm new to Smoke and have an issue. Im importing an xml from FCP and Smoke crashes in the library. I'm taking a class @ FXPHD and the first class is an easy xml import reading the source media.
As soon as I load the xml into the clip library Smoke crashes. I've already gone thru the system set up requirements and have a great machine built to Smoke requirements. I'm wondering if it is a network configuration of some sort? Not sure...
image attached at freeze point
View 2 Replies
View Related
Oct 16, 2012
Is there a definitive list of functions, arguments, parameters etc?
I'm specifically trying to access image width and height and the number of items in the action node.
(SelectedOrder.count or something...)
View 6 Replies
View Related
Aug 16, 2013
Doing a project in 5760 x 1080 (3xHD). And smoke does not import, crashes, leaving no reports. Just hangs.Upon a new project, and import, but when pushing the edit button for resize, crashes again. Hangs, no report...
Is Smoke capable of doing 3xHD projects?
View 8 Replies
View Related
Sep 10, 2013
I have a problem everytime i apply the axis effect on a clip in the timeline. What happens is that smoke starts loading the effect, but hangs there, and after a while a message comes up saying that due to a software error smoke must close. But the only way to close it, is only if i do force quit process through terminal. Everything else works really well though, besides this specific issue with axis effect. This by the way didn't happen with Smoke 2013 SP2, maybe a hardware compatibility issue?
here is the smoke log file from console:
Sep 09 20:33:33 : No shader unit for shader (null).
Sep 09 20:33:33 : Assertion failed: (_curUnit), function shaderUnit* shaderUnits::getCurrentUnit() const, file develop/src/libcoreGraphics/shaderMgr.C, line 378.
Sep 09 20:33:33 : Application: smoke 2013.2.53 x86_64
Sep 09 20:33:33 : Pid: 3023
Sep 09 20:33:34 : Uninitialising thread manager.
The footage that i'm using is SD PAL, in DV format (.mov) files, captured through firewire through Premiere CS6. Is it a problem of the footage? GPU? or am i missing something?
My computer specs are (i'm on a hackintosh for now...):
Smoke 2013 ext1 (Eduactional version)
Snow Leopard 10.6.8
Intel Quad Core Q9300
GPU NVIDIA 9800GT 1GB
4GB RAM
System is installed on a 500GB SATA drive , and media storage folder of smoke is placed on a 150GB Raptor disk.
View 3 Replies
View Related
Jul 22, 2013
Whenever I try to enter source record mode the programs crashes and quits. I've tried with keyboard shortcut, using the option dropdown and the same thing happens. This did not happen with previous version.
View 2 Replies
View Related
Jan 16, 2014
I have two recent model 27" iMacs running CC. On one system, playback freezes or I getting a Media Pending screen when playing AVCHD (.mts) footage. The second system can playback all the footage with no probplem.
The troubled system specs are: iMac 27-inch, Mid 2011
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Software OS X 10.9.1 (13B42)
View 4 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
