I'm using Pre Release 5 for editorial as opposed to conform and I've moved some of my source material to a different drive than I was using when I started the project.
Normally in FCP or Avid, I would just re-link to the footage and that would be that. I know this could be done with footage in the timeline, but what about plain old source footage? I can't seem to find the re-link tool.
Any way you can take 5D footage and convert it from Lin to LOG?
View 1 Replies View RelatedAs soon as i try to open the default canon folder containing 5d footage, software crashes (spinning wheel, then app exited abnormally message).
I try re-starting wiretap gateway, wiretap server, and stone+wire thru Service Monitor then restarting smoke but that sometimes solves the issue and sometimes it doesnt. And sometimes i see checkerboards.
I tried solving the problem by running smoke with airport on or off but with similar results.I did some search here and gathered that it could be due to a number of reasons (IP address, local host etc) but I dont quite fully understand everything.
I don't have my mac pro networked via any Ethernet cable or anything and don't want to have to keep airport on unless i need to be online.
I've got RED footage that imports codec 3.x, RedColor3 and RedGamma3. I'm delivering rec709 but would like to work linearized. Do I just change the color settings to rec709 in the color box and linear in the curve option to work correctly?
View 2 Replies View RelatedI'm looking for the workflow for Red Footage.
In our facility, we are shooting 4k HD format. Then we can finish our final project as HD.
I installed Red Rocket and the Red Footage as Half premium debayer (1920x1080) playback in realtime at preview window of the "Media" tab.
However, I insert the same clip on the timeline (1920x1080, same as Half premium debayer), smoke automatically puts resizing effect. When I open the effect, I notice this effect doesn't do anything.
What would be a bonus is at anytime I could go to the timeline and click on an imported piece of footage and tell smoke to Include YUV headroom after the fact of it being imported and used.
View 7 Replies View RelatedI did a bunch of test fixes on a low resolution version of a project. All using batch.
Now I have the full resolution versions of the clips.
I thought I could drop the Batch set-up onto the new clips and then do an Apply & Scale to the Action nodes inside Batch. But that doesn't seem to work. At least from what I can see, all my gmasks are in the place they'd be if the footage were still smaller?
I have footage that contains GS footage. I also have a graphic I want to put behind the two. I can achieve this with a vertical comp in my time line and the timeline axis effect. But when I try to connect the two with CFX I get an error and my footage looks wonky.
View 2 Replies View RelatedI have a question about conforming material from Abode Premiere CS 5.5..I have a 720@50p source that was converted to Avid DNxHD 10bit 720@50p in Quicktime .mov container, using Media Encoder.Then material was edited in Premiere, cuts, dissolves and etc. Timeline in Premiere is set to 720@25p, because I need to output 720@25p finals.Premiere DOES NOT slowdown shots in timeline, it just plays them skipping every 2nd frame (I thinks so), so it is played in a normal speed and audio is in sync also. In Interpret footage settings nothin is changed - so, it still treats as 50p footage.
Problem is that I dont understand how to conform this footage correctly in Smoke.If I use automatic conform using wiretap import of AAF (same dir as footage is), Smoke thinking about this operation about 10-15 mins and then it creates a 1080@50p timeline where all shots are smaller it's native size and timing is completly wrong. They starts early than they should.If I use Video I/O I have correct sizing but timing issue is still present.
I need to create a project with PAL settings and override resolution to 720p?
How make Smoke to play footage same as Premiere does? Whithout shifting in out points?
There is an issue with footage that needed the YUV headroom to be turned on when importing.What happens is that when this footage is exported, it get crushed blacks. So there need to be a YUV headroom setting for the export I believe. Maybe I am seeing it wrong.
Footage is MXF Panasonic HPX171 (DVCPRO HD 72025PN) footage.
I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.
View 3 Replies View RelatedThe client asked me to give them a version of the Final sequence in which the colour of a looping background was slightly different so that they could compare the two. They also asked for two different pieces of music so they could test which one worked better. Before they picked the final version they wanted everything slightly shorter. The duplicates keep piling up.
Is there a way to swap put a shot in a master sequence and have it update in all the other duplicates I have made? How does one keep track of all the sequences in Smoke with all these little changes.
PS. With the audio I put the two music tracks in the sequence and muted one or the other. Dealing with different lengths of a commercial needs me to duplicate and then things start piling up.
Somehow on it's incarnation to Smoke 2013 a core functionality of editing is lost.
I cannot drag'n drop any footage from the viewer into the TL by F-drag or Pen-tip anymore. This has been working in previous versions of Smoke and makes an NLE an intuitive experience, especially if you are coming from a FCP/PremierPro background. I'm sure this is a typical alpha build loss.
what is the workflow for making footage broadcast legal in smoke.
I have read different explanations on the web, but still not totally clear on it.
how Brian Milligan creates broadcast safe.
DSLR footage I need a sharpen node. Is there a way to sharpen in Smoke?
View 2 Replies View RelatedIs there any keyboard shortcut in Smoke to shuttle quickly across footage (with sound playing) at 2x or 3x speed like you can in Avid/FCP/Premiere etc by double/triple-tapping the J and L keys?
This makes scanning through clips and the timeline so much faster and I consider it a basic essential.
I have just installed Smoke Ext 1 and tried Keying with Green Screen Footage. The Master Keyer result is not even close. Is it a bug with the Master Keyer?
View 1 Replies View RelatedIs it possible to use a Sequence as a Source? I like to use stringouts of source clips while editing as well as sections of existing Sequences as source material for new Sequences.
View 2 Replies View RelatedIn 2012 it was very easy to select a gap segment and click color source in the soft effects. In 2013 it appears to be much more difficult, you need to create it in a folder then edit it into a sequence. Am I missing something? I wish there was a color source option in the effects ribbon.
View 2 Replies View RelatedWhere colour source on the timeline is. I am always droping black or coloured frames into the timeline either as a background for some softFX text or even as a fill for the softFX text so I can then track that text to the background.
View 9 Replies View RelatedI might be being really thick but my old method of managing clips and handles in a master was to perhaps conform from rushes with 75fr handles, save that conform but then in my wip master I would consolidate all sees down to 10fr. This way if I was sharing shots around the facility you could match a shot out (using the old match to segment preference rather than match to source) and it would respect the handles you had set in your master.
I can't seem to replicate that old behavior in 2013 smoke. It will either match to source or to just the segment without handles. How can I get it to match out with the handles I have consolidated?
I opened 33 sources as "open as Sequence" behind each other and after doing that double clicking on the source or any source isn't loading it into the source viewer. There is no icon next to the source indicating that it isn't a source. After the fourth selection was open as Sequence. the one that was opened as the first is recycled and the Sequence Icon disappears from in-front of it. So there is only four icons at any given time in the list.
View 5 Replies View RelatedI've been called upon to use Smoke as an intermediate between offline and color session elsewhere. I need to export a DPX sequence for the colorist to work from. Can I easily do this in Smoke? Just conform the offline and export DPX sequence? Also, can I put in handles and include original source timecode?
View 4 Replies View RelatedI have recently upgraded to Smoke 2012 sp2 and have a small issue regarding the reordering of my clips in the source area.
On 2011 when you placed clips in the source area in a specific order and saved it to the library and when you recalled it from the library it would put the clips back in exactly the same place you left them. Now in 2012 when you do that it re-orders them in some sort of chronological order.
Is there a setting that I'm not aware of that will stop doing that as I place them in a specific structure which makes sense to me and is easy to find and understand on large builds, now I'm having to sift through the clips and waste time finding what I did last and checking through versions to find the latest one.
When matching a source clip from the new sequence area it appears that you now have to have the widget on the clip you wish to match rather than just select the clip. Is this a change in the way 'match' works or is it a bug?
It was always nice to just tap the clip and press match rather than now having to scrub your widget to the right layer and clip before pressing match.
Often when I go back to previously saved source areas from previous projects (like I just saved yesterday) my source clip icons are squished forcing me to re adjusts.
Smoke 2013 Ext1
I have seen a number people new to smoke get confused when trying to edit mono audio source to a stereo track only to find the audio doesn't doesn't appear.
How about a preference that automatically splits the mono audio so that it edits to the stereo track?
If it was on by default it would definitely be of less confusion to new users
Or perhaps a dialogue box explaining why the edit did not work due to the differing audio properties.
Great work with getting smoke to where it is!
I can't seem to get source clips to Gang with the timeline in the record area, did we lose this? I always gang up my reference with my conform so I really hope we havn't lost this!
View 1 Replies View RelatedI'm trying to get my source audio to patch to tracks 3 and 4 in my record timeline. It looks like I should be able to drag on the source clips patch to change it from A1.L and A1.R to A2.L/A2.R.
View 5 Replies View RelatedI'm receiving this error will trying to export a clip from Smoke on Mac.
cannot access source clip/stonefs 7...
A weird thing is that I don't always get the error message. Sometimes the export works. But, more often it's not.
Whenever I try to enter source record mode the programs crashes and quits. I've tried with keyboard shortcut, using the option dropdown and the same thing happens. This did not happen with previous version.
View 2 Replies View Related