AutoDesk Smoke :: Updating Footage In Duplicate Sequences?
Apr 19, 2013
The client asked me to give them a version of the Final sequence in which the colour of a looping background was slightly different so that they could compare the two. They also asked for two different pieces of music so they could test which one worked better. Before they picked the final version they wanted everything slightly shorter. The duplicates keep piling up.
Is there a way to swap put a shot in a master sequence and have it update in all the other duplicates I have made? How does one keep track of all the sequences in Smoke with all these little changes.
PS. With the audio I put the two music tracks in the sequence and muted one or the other. Dealing with different lengths of a commercial needs me to duplicate and then things start piling up.
View 9 Replies
ADVERTISEMENT
Feb 8, 2013
Calling all RED users (and not RED users as well). I have just posted a new 2 part series on dealing with upscaling RED sequences in Autodesk Smoke
This user requested topic shows how you can achieve the workflow of doing your editorial and basic effects with a small debayer setting followed by unlinking the sequence, upscaling the debayering settings and relinking everything together at the higher debayer setting. We also cover the affects of ConnectFX created before or after upscaling a sequence.
As I said, "Debayering Fun for Everyone!"You can check this out now on the Smoke Learning Channel. URL....iTunes - Do a search for the Smoke Learning Channel.
View 6 Replies
View Related
Oct 9, 2013
I am trying to relink still images in Smoke. I have .tif files and were taken by a still photographer. As I'm relinking to the original sources, Smoke is identifying sequential file names as image sequences and it's not available in the Potential Matches as a link option. For other stills in the same folder where there is a break in a numeric filename sequence, Smoke identifies and relinks just fine.
Is there an option to ignore image sequence identification?
I also run into this for other elements where are numbered by designers like credits_01, credits_02, etc.
Using Extension for Smoke for Mac 2013.
View 2 Replies
View Related
Jun 25, 2012
How do you share media and edit sequences between projects?
View 2 Replies
View Related
Apr 17, 2013
I need to open about 50 folders and extract the image sequences within the folders from my library. A flame demo artist showed me how to do it at NAB and I can't remember how to do it now.
View 2 Replies
View Related
Dec 19, 2012
Backburner doesn't seem to work properly for me in the release version. I cannot export file sequences as backburner sticks on waiting. I can however export Quicktimes fine.
View 1 Replies
View Related
Aug 11, 2011
Any way you can take 5D footage and convert it from Lin to LOG?
View 1 Replies
View Related
Nov 6, 2012
I'm using Pre Release 5 for editorial as opposed to conform and I've moved some of my source material to a different drive than I was using when I started the project.
Normally in FCP or Avid, I would just re-link to the footage and that would be that. I know this could be done with footage in the timeline, but what about plain old source footage? I can't seem to find the re-link tool.
View 9 Replies
View Related
Dec 17, 2011
As soon as i try to open the default canon folder containing 5d footage, software crashes (spinning wheel, then app exited abnormally message).
I try re-starting wiretap gateway, wiretap server, and stone+wire thru Service Monitor then restarting smoke but that sometimes solves the issue and sometimes it doesnt. And sometimes i see checkerboards.
I tried solving the problem by running smoke with airport on or off but with similar results.I did some search here and gathered that it could be due to a number of reasons (IP address, local host etc) but I dont quite fully understand everything.
I don't have my mac pro networked via any Ethernet cable or anything and don't want to have to keep airport on unless i need to be online.
View 5 Replies
View Related
Jan 7, 2014
I've got RED footage that imports codec 3.x, RedColor3 and RedGamma3. I'm delivering rec709 but would like to work linearized. Do I just change the color settings to rec709 in the color box and linear in the curve option to work correctly?
View 2 Replies
View Related
Jul 11, 2013
I'm looking for the workflow for Red Footage.
In our facility, we are shooting 4k HD format. Then we can finish our final project as HD.
I installed Red Rocket and the Red Footage as Half premium debayer (1920x1080) playback in realtime at preview window of the "Media" tab.
However, I insert the same clip on the timeline (1920x1080, same as Half premium debayer), smoke automatically puts resizing effect. When I open the effect, I notice this effect doesn't do anything.
View 3 Replies
View Related
Oct 14, 2012
What would be a bonus is at anytime I could go to the timeline and click on an imported piece of footage and tell smoke to Include YUV headroom after the fact of it being imported and used.
View 7 Replies
View Related
Feb 10, 2014
I did a bunch of test fixes on a low resolution version of a project. All using batch.
Now I have the full resolution versions of the clips.
I thought I could drop the Batch set-up onto the new clips and then do an Apply & Scale to the Action nodes inside Batch. But that doesn't seem to work. At least from what I can see, all my gmasks are in the place they'd be if the footage were still smaller?
View 4 Replies
View Related
Mar 6, 2013
I have footage that contains GS footage. I also have a graphic I want to put behind the two. I can achieve this with a vertical comp in my time line and the timeline axis effect. But when I try to connect the two with CFX I get an error and my footage looks wonky.
View 2 Replies
View Related
May 6, 2012
I have a question about conforming material from Abode Premiere CS 5.5..I have a 720@50p source that was converted to Avid DNxHD 10bit 720@50p in Quicktime .mov container, using Media Encoder.Then material was edited in Premiere, cuts, dissolves and etc. Timeline in Premiere is set to 720@25p, because I need to output 720@25p finals.Premiere DOES NOT slowdown shots in timeline, it just plays them skipping every 2nd frame (I thinks so), so it is played in a normal speed and audio is in sync also. In Interpret footage settings nothin is changed - so, it still treats as 50p footage.
Problem is that I dont understand how to conform this footage correctly in Smoke.If I use automatic conform using wiretap import of AAF (same dir as footage is), Smoke thinking about this operation about 10-15 mins and then it creates a 1080@50p timeline where all shots are smaller it's native size and timing is completly wrong. They starts early than they should.If I use Video I/O I have correct sizing but timing issue is still present.
I need to create a project with PAL settings and override resolution to 720p?
How make Smoke to play footage same as Premiere does? Whithout shifting in out points?
View 6 Replies
View Related
Jul 19, 2012
There is an issue with footage that needed the YUV headroom to be turned on when importing.What happens is that when this footage is exported, it get crushed blacks. So there need to be a YUV headroom setting for the export I believe. Maybe I am seeing it wrong.
Footage is MXF Panasonic HPX171 (DVCPRO HD 72025PN) footage.
View 5 Replies
View Related
Aug 10, 2012
I was wanting to try out the clone tool to paint out a fly in some footage I have, but I can't get the clone tool to grab a sample region. I hold down ctrl and click where I want to sample from, but the green circle doesn't appear. I can do it by manually offsetting it with the x and Y position, but I'd like to do it with my pen.
View 3 Replies
View Related
Jun 17, 2012
Somehow on it's incarnation to Smoke 2013 a core functionality of editing is lost.
I cannot drag'n drop any footage from the viewer into the TL by F-drag or Pen-tip anymore. This has been working in previous versions of Smoke and makes an NLE an intuitive experience, especially if you are coming from a FCP/PremierPro background. I'm sure this is a typical alpha build loss.
View 6 Replies
View Related
Apr 10, 2013
what is the workflow for making footage broadcast legal in smoke.
I have read different explanations on the web, but still not totally clear on it.
how Brian Milligan creates broadcast safe.
View 2 Replies
View Related
Jul 25, 2012
DSLR footage I need a sharpen node. Is there a way to sharpen in Smoke?
View 2 Replies
View Related
Aug 2, 2012
Is there any keyboard shortcut in Smoke to shuttle quickly across footage (with sound playing) at 2x or 3x speed like you can in Avid/FCP/Premiere etc by double/triple-tapping the J and L keys?
This makes scanning through clips and the timeline so much faster and I consider it a basic essential.
View 8 Replies
View Related
Jun 6, 2013
I have just installed Smoke Ext 1 and tried Keying with Green Screen Footage. The Master Keyer result is not even close. Is it a bug with the Master Keyer?
View 1 Replies
View Related
Dec 16, 2011
I know we are a little behind the times, but when upgrading to Ex1, will all of the existing projects still be usable? Or do we need to "Wipe 'em All"?
View 3 Replies
View Related
Oct 30, 2012
Is there a way to duplicate layers in text?
View 4 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
