AutoCad :: Install Two Versions On Same PC?
May 5, 2013I was asked at work if you can you install two versions of autocad (mech & elect etc) on the same PC and then select what version you want to run ?
View 4 Replies
ADVERTISEMENT
VideoStudio :: Install And Run Two Versions?
Aug 6, 2013I have installed and am using Corel VideoStudio Pro X4. Can I install Corel VideoStudio Pro X6 on the same computer so that both versions are working at the SAME TIME, WITHOUT CONFLICTS due to both versions being installed on the same computer?? My OS is windows 7 and my HP desktop has an Intel I7 processor.
For that matter, can I install the demo version of VideoStudio Pro X6 without causing conflict with my existing VideoStudioPro X4?
AutoCAD Inventor :: Can Prior Versions Access Current Versions Of Vault
May 15, 2013Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies View RelatedPhotoshop :: Install Different Versions Of Photoshop
Dec 26, 2008I have photoshop 7 and pothoshop CS3; can I install them both on my Computer ? (on the same hard disk, maybe in differnt directories) This because I want to move slowly to CS3, but now I know better photoshop 7.
View 3 Replies View RelatedAutoCAD .NET :: Launching Different Versions From C#
Dec 6, 2006From my C# windows forms app, I want to launch AutoCAD 2006 and 2007..This code is working with 2006 :
Autodesk.AutoCAD.Interop.AcadApplication acadApp = new
Autodesk.AutoCAD.Interop.AcadApplicationClass();
I'm using references to Autodesk.AutoCAD.Interop + .Common version
16.1.63.0.
I want to launch AutoCAD 2007, too. So, I added a reference to AutoCAD 2007.Type Library from COM. And now I'm getting a lot of compiling errors :
Error 448 The type 'Autodesk.AutoCAD.Interop.AcadApplicationClass' exists in
both 'd:CIMS.NETCimsWinClientinDebugAutodesk.AutoCAD.Interop.dll' and
'c:WINDOWSassemblyGAC_MSILAutodesk.AutoCAD.Interop17.0.54.0__eed84259d7cbf30bAutodesk.AutoCAD.Interop.dll'
What should I do to launch different versions of AutoCAD from C#, based on user choice ?
AutoCad :: Running 2 Versions At Same Time?
Jul 5, 2011I installed the trial version of autocad 2012 yesterday and it worked fine when it stated after installation, but today i am unable to start it my old MEP 2008 starts up instead , i do not have the option to start 2012 there are no autocad 2012 short cuts on desk top ( I'm sure there was after instalation ? ) and it isnt in the start menu or the open with menu, i can see autocad 2012 in the program files but no exe files, how to recover the desktop short cuts ?
Is it a conflict with MEP 2008 ?
AutoCad :: Tool Palettes Across Versions?
Mar 28, 2013I am having an issue at my office when I open or save a drawing (I'm using Acad 2013) people using 2011 Acad Architecture who later access the file cannot use their tool palette or detail component manager. The tool palette will pop up, but when they try to drag something out of it, there is an unspecified error. The detail component manager in Architecture will not even pop up for some reason.
View 0 Replies View RelatedPhotoshop :: Can't Fresh Install From CS2 - CDs App Install Option Is (Grayed Out)?
Mar 14, 2013I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
Illustrator :: Re-install Option After Corrupt Initial Install
Mar 12, 2014How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC.
View 1 Replies View RelatedAutoCAD Inventor :: Using ILogic To Switch Versions
May 3, 2013I would like to use iLogic to switch my design (rather complex assembly) between the 'full' version, a 'simple' version and a 'FEA' version. I'm learning Inventor step by step and did not studies the making of drawings yes.
I'm not sure if it is ok to use iLogic for this purpose because I'm afraid my drawings will update to the simple' or 'FEA' versions. This is not what I want. And when using the 'FEA' version, will the FEA information get lost when I switch back to the 'full' or 'simple' versions?
Or in other words: Is it wise to use iLogic for this purpose?
AutoCAD 2013 :: Slow Over Network All Versions
Aug 14, 2013We're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
AutoCAD 2013 :: Saving To Older Versions
Apr 2, 2013I had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies View RelatedAutoCAD Civil 3D :: Saving To Early Versions
Jul 12, 2012I was just wondering if there is some way that civil 3d (2011) is capable of saving down to a 2004 version and still be able to view the civil 3d object. I know I can do this with 2007 version but I think that any ACAD version earlier than 2007 is not capable of recognizing the civil 3d objects.
View 7 Replies View RelatedAutoCad :: Saving Blocks That Earlier Versions Can Use
Apr 5, 2011Im currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies View RelatedAutoCad :: Electronic Versions Of Some Older Drawings
Jun 5, 2012I've been tasked with creating electronic versions of some older AutoCAD drawings for which only hard copies exist. There are a lot of them, so in an effort to expedite the process I thought I would try to scan the drawings and scale them appropriately so that I could just go through and trace the lines. I was planning on doing some sanity-checks of the measurements in the AutoCAD and actual drawings as well. This would save me the time of having to measure the length and angle between each of the lines on the drawing (to which there are wild variations) before drawing them in AutoCAD.
The problem is that these drawings were printed on some really large paper (Ex: 4ft by 6ft), so I can't really use a desktop scanner. My thought was that I could mount the drawings on a wall and take photographs of them using my camera instead. I would use the photographs to trace lines in AutoCAD.
AutoCAD Inventor :: Content Center File Versions
Feb 15, 2012By default Content Center creates the sub-directories 2012, 2011, 2010 etc. to store the generated content center instance files. I have never changed this behavior. Why is it required to maintain these files in the existing separate directories? I don't intend to use a previous release of Inventor once upgraded.
I can see that there is a good possibility of generating the same content center instance in multiple directories ie: if you created a 1/2" nut in the 2011 directory and then there is a good chance of doing it again in the 2012 directory.
I would like to migrate all the files in those directories to my current release 2012 then place them in a common "generic" directory without separation into yearly subdirectories. Would this cause any serious issues?
I know I'll probably be resolving links for a while, but I can deal with that as long as Content Center still works after that. I would of course change the default location to my "generic" location.
AutoCAD LT :: Can't Open File Created With Older Versions
Apr 23, 2013we have bought aclt 2013 and we have got a problem with some files created wtih older versions of aclt.When we try to open the file (plan), the file name appears but the progress bar don' t move then the file close.
HP Z620 12Go W7x64
AutoCAD Inventor :: Setting Old Versions Save Location?
Sep 26, 2012Is there a way to set old versions folder to save to a different location than the working folder?
Our IT deletes these folders from our server, so I would like to have them save to my hard drive.
AutoCAD Inventor :: Library - Database Schema Between Versions?
Sep 27, 2013i have been provided a library for a plugin i have recently purchased. The library was kindly given to me but it isnt actually part of the addin so it comes with no support. It appears that it has been created in 2014 whereas i have 2013.
Can it be downgraded without downloading & installing 2014?
Can a library be downgraded to 2013 from 2014 without opening & saving each file separately? there are approx 1500 parts
parts are not interoperable within the software. There cant be that much difference between a 2013 & 2014 file surely.....
AutoCAD Visual LISP / AutoLISP :: Differentiate Between 32 Bit And 64 Bit Versions
Mar 9, 2012I have a question: how can I differentiate between 32bit and 64bit versions of Autocad 2010 (one is for windows xp 32bit and one for windows 7 64bit)? Is there a variable I can compare through a lisp routine?
View 2 Replies View RelatedAutoCAD 2013 :: Does Not Open Some Earlier Versions Of Dwg Files
May 4, 2012I have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
AutoCAD LT :: Opening 2013 Documents In Older Versions?
Nov 6, 2012I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedAutoCAD Architecture :: This Drawing Contains Newer Versions Of Objects
Feb 15, 2013I'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
AutoCad :: MTEXT Shifts In Different Versions (2007 And 2012)
Nov 21, 2011I have a number of drawings which I believe were originally created in ACAD 2012 but have since been edited with ACAD 2007.
The drawings contain hatched areas. Within each hatched area is a MTEXT entity with background mask enabled within a rectangle. The idea is that the background mask on mtext wipes out the hatch below for legibility.
When opened in 2007 all mtext entities seems to be centred within the rectangle and the background mask fills the rectangle as intended (see below).
mtext 2007(2).png
When this same dwg file is opened with ACAD 2012 the mtext entities shift position and the size of the background mask is altered (see below).
mtext 2012(2).png
AutoCAD Inventor :: Making Files Compatible With Other Versions?
May 7, 2013I have 2014 Inventor Professional at my home and I am working on a project. I would like to work on it at work on 2013 Inventor Professionl. Is there any way I can make my 2014 file open on Inventor 2013?
View 1 Replies View RelatedAutoCAD LT :: 2013 Unable To Save Files For Older Versions?
May 24, 2012I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
AutoCAD 2013 :: Migrating Settings From One Computer To Another With Differing Versions?
May 8, 2012One of our drafters recently got a new computer. We installed AutoCAD 2013 on the new machine. He was using AutoCAD 2012 on the old machine.
After exporting the settings from 2012, I attempted to import them into 2013. The migrate tool throws an error that insinuates you must have the old version installed on the same computer in order to migrate the settings. The import tool states that it can only import settings from the same version of AutoCAD.
How does one go about importing settings from one computer running AutoCAD 2012 onto another computer running AutoCAD 2013?
(In particular, the user is looking to migrate over his custom tool palette.)
AutoCAD 2013 :: Network License Manager Works With Any Versions?
Aug 13, 2013I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies View RelatedAutoCAD 2010 :: Uninstalled Older Versions And Now Some Features Are Not Working
Apr 20, 2012I installed 2012 a couple of months ago and have been working with it just fine. Recently, I cleaned up my computer and uninstalled earlier versions (2009,2010,2011) . Now, I am getting errors such as:
- error initializing sheet set manager
-etransmit not working
AutoCAD 2013 :: Text Justification Changes When Saved To Earlier Versions?
Sep 20, 2012Why does the justification of text created in 2013 change when I save to an earlier version of AutoCAD (2002)?
View 2 Replies View RelatedAutoCAD 2013 :: Doesn't Open Some Earlier Versions Of DWG Files
Feb 14, 2013I received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View Related
