AutoCad :: Running 2 Versions At Same Time?
Jul 5, 2011
I installed the trial version of autocad 2012 yesterday and it worked fine when it stated after installation, but today i am unable to start it my old MEP 2008 starts up instead , i do not have the option to start 2012 there are no autocad 2012 short cuts on desk top ( I'm sure there was after instalation ? ) and it isnt in the start menu or the open with menu, i can see autocad 2012 in the program files but no exe files, how to recover the desktop short cuts ?
Is it a conflict with MEP 2008 ?
View 7 Replies
ADVERTISEMENT
Aug 13, 2011
I have a 5-6 year Gateway PC with PSP XI installed with Vista. I will be getting a new Gateway next week with WIN 7. I would like to D/L the trial version of PSP X3 to my present PC with Vista without removing PSP XI. Would this work? Would I have trouble removing PSP X3 when I an done testing?
View 5 Replies
View Related
Mar 22, 2013
I have a lisp that i use on occasion so i loaded it with APPLOAD into the startup suite. now it loads and runs every time i open a drawing. how can i stop it from running...but still have it available when i need it (without having to find it and reload it)?
View 5 Replies
View Related
May 15, 2013
Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies
View Related
Jan 31, 2006
I want to add a realtime clock to my video ... following the timeline clock. Can I do this with VideoStudio? How?
View 14 Replies
View Related
Jan 6, 2013
I am running Win 7 64bit Pro with several users defined on a PC. PSP X4 runs OK for my user, but all other users cannot start PSP X4 they get a message Temp Directory not defined. The Temp Directory is defined and valid with write permissions.
Windows is installed on C: drive, but User directories are on E: Drive
PSP X4 version 14.3.0.3
I have reviewed a post for a similar issue, but this does not apply for my issue viewtopic.php?f=56&t=39832&p=208741&hilit=temp+directory+not+defined
I have even tried copying the corel hive of HKCUSoftwareCorel from my user and "DocumentsCorel Paintshop Pro" directory to the other user, but still get the temp directory is not defined message
So basically although PSP X4 is running for one user on the PC, none of the other users can start it to run for the first time
View 1 Replies
View Related
Sep 5, 2008
I'm trying to Install Photoshop CS3. i have a problem. I was installing it. pc crashed. and now i restarted and everytime i Try to install the Adobe Photoshop CS3 and everytime it keeps saying ' (Setup already Running) You can only install one Adobe Product at a time. PLease complete the other installation before attempting to install Adobe Photoshop CS3""" I keep getting that. even After i shut my pc down for a day. i still get it.? anyway to stop it so i can install it?
View 7 Replies
View Related
Jan 15, 2013
can I have pse7 and pse11 running at the same time on the same computer?
View 3 Replies
View Related
Mar 13, 2012
For some reason when I scrub through my animation, it runs really slow. And it has nothing to do with my computer itself. It is the particular file. I tested this by opening up one of my others (i saved in iterations) and they all scrub just fine. All I was doing was animating with a rig, so there isnt any extra polygons or whatever. And on top of that, it worked just fine before I exited the program earlier, I even playblasted it and everything, and then I looked at the playblast later and decided I wanted to change something, reopened the file, and the timeline has been chugging ever since. I tried opening and closing maya already.
View 1 Replies
View Related
Jan 16, 2012
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies
View Related
Aug 2, 2011
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
View 3 Replies
View Related
Dec 6, 2006
From my C# windows forms app, I want to launch AutoCAD 2006 and 2007..This code is working with 2006 :
Autodesk.AutoCAD.Interop.AcadApplication acadApp = new
Autodesk.AutoCAD.Interop.AcadApplicationClass();
I'm using references to Autodesk.AutoCAD.Interop + .Common version
16.1.63.0.
I want to launch AutoCAD 2007, too. So, I added a reference to AutoCAD 2007.Type Library from COM. And now I'm getting a lot of compiling errors :
Error 448 The type 'Autodesk.AutoCAD.Interop.AcadApplicationClass' exists in
both 'd:CIMS.NETCimsWinClientinDebugAutodesk.AutoCAD.Interop.dll' and
'c:WINDOWSassemblyGAC_MSILAutodesk.AutoCAD.Interop17.0.54.0__eed84259d7cbf30bAutodesk.AutoCAD.Interop.dll'
What should I do to launch different versions of AutoCAD from C#, based on user choice ?
View 2 Replies
View Related
May 5, 2013
I was asked at work if you can you install two versions of autocad (mech & elect etc) on the same PC and then select what version you want to run ?
View 4 Replies
View Related
Mar 28, 2013
I am having an issue at my office when I open or save a drawing (I'm using Acad 2013) people using 2011 Acad Architecture who later access the file cannot use their tool palette or detail component manager. The tool palette will pop up, but when they try to drag something out of it, there is an unspecified error. The detail component manager in Architecture will not even pop up for some reason.
View 0 Replies
View Related
May 3, 2013
I would like to use iLogic to switch my design (rather complex assembly) between the 'full' version, a 'simple' version and a 'FEA' version. I'm learning Inventor step by step and did not studies the making of drawings yes.
I'm not sure if it is ok to use iLogic for this purpose because I'm afraid my drawings will update to the simple' or 'FEA' versions. This is not what I want. And when using the 'FEA' version, will the FEA information get lost when I switch back to the 'full' or 'simple' versions?
Or in other words: Is it wise to use iLogic for this purpose?
View 7 Replies
View Related
Aug 14, 2013
We're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
View 9 Replies
View Related
Apr 2, 2013
I had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies
View Related
Jul 12, 2012
I was just wondering if there is some way that civil 3d (2011) is capable of saving down to a 2004 version and still be able to view the civil 3d object. I know I can do this with 2007 version but I think that any ACAD version earlier than 2007 is not capable of recognizing the civil 3d objects.
View 7 Replies
View Related
Apr 5, 2011
Im currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies
View Related
Jun 5, 2012
I've been tasked with creating electronic versions of some older AutoCAD drawings for which only hard copies exist. There are a lot of them, so in an effort to expedite the process I thought I would try to scan the drawings and scale them appropriately so that I could just go through and trace the lines. I was planning on doing some sanity-checks of the measurements in the AutoCAD and actual drawings as well. This would save me the time of having to measure the length and angle between each of the lines on the drawing (to which there are wild variations) before drawing them in AutoCAD.
The problem is that these drawings were printed on some really large paper (Ex: 4ft by 6ft), so I can't really use a desktop scanner. My thought was that I could mount the drawings on a wall and take photographs of them using my camera instead. I would use the photographs to trace lines in AutoCAD.
View 9 Replies
View Related
Feb 15, 2012
By default Content Center creates the sub-directories 2012, 2011, 2010 etc. to store the generated content center instance files. I have never changed this behavior. Why is it required to maintain these files in the existing separate directories? I don't intend to use a previous release of Inventor once upgraded.
I can see that there is a good possibility of generating the same content center instance in multiple directories ie: if you created a 1/2" nut in the 2011 directory and then there is a good chance of doing it again in the 2012 directory.
I would like to migrate all the files in those directories to my current release 2012 then place them in a common "generic" directory without separation into yearly subdirectories. Would this cause any serious issues?
I know I'll probably be resolving links for a while, but I can deal with that as long as Content Center still works after that. I would of course change the default location to my "generic" location.
View 5 Replies
View Related
Apr 23, 2013
we have bought aclt 2013 and we have got a problem with some files created wtih older versions of aclt.When we try to open the file (plan), the file name appears but the progress bar don' t move then the file close.
HP Z620 12Go W7x64
View 4 Replies
View Related
Sep 26, 2012
Is there a way to set old versions folder to save to a different location than the working folder?
Our IT deletes these folders from our server, so I would like to have them save to my hard drive.
View 1 Replies
View Related
Sep 27, 2013
i have been provided a library for a plugin i have recently purchased. The library was kindly given to me but it isnt actually part of the addin so it comes with no support. It appears that it has been created in 2014 whereas i have 2013.
Can it be downgraded without downloading & installing 2014?
Can a library be downgraded to 2013 from 2014 without opening & saving each file separately? there are approx 1500 parts
parts are not interoperable within the software. There cant be that much difference between a 2013 & 2014 file surely.....
View 6 Replies
View Related
Mar 9, 2012
I have a question: how can I differentiate between 32bit and 64bit versions of Autocad 2010 (one is for windows xp 32bit and one for windows 7 64bit)? Is there a variable I can compare through a lisp routine?
View 2 Replies
View Related
May 4, 2012
I have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
View 9 Replies
View Related
Nov 6, 2012
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies
View Related
Feb 15, 2013
I'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
View 1 Replies
View Related
Nov 21, 2011
I have a number of drawings which I believe were originally created in ACAD 2012 but have since been edited with ACAD 2007.
The drawings contain hatched areas. Within each hatched area is a MTEXT entity with background mask enabled within a rectangle. The idea is that the background mask on mtext wipes out the hatch below for legibility.
When opened in 2007 all mtext entities seems to be centred within the rectangle and the background mask fills the rectangle as intended (see below).
mtext 2007(2).png
When this same dwg file is opened with ACAD 2012 the mtext entities shift position and the size of the background mask is altered (see below).
mtext 2012(2).png
View 5 Replies
View Related
May 7, 2013
I have 2014 Inventor Professional at my home and I am working on a project. I would like to work on it at work on 2013 Inventor Professionl. Is there any way I can make my 2014 file open on Inventor 2013?
View 1 Replies
View Related
Feb 2, 2014
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
View 15 Replies
View Related
