Is there a way to set old versions folder to save to a different location than the working folder?
Our IT deletes these folders from our server, so I would like to have them save to my hard drive.
is there a way to set the default save location in gimp, when i create a new image and save it always starts in ~/Documents directory on the save dialog.
i tried to see if there was a setting i could override in gimprc but i was unable to find this, maybe i am looking in the wrong place.
Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies View RelatedHow do I change the default save location?
It goes to my documents, but in options I can't find anything with that path.
I want it to go to a different folder but I can't figure out how to make it do that.
We have about 25 users on Inventor working via a common network on multiple projects, we do not have vault.
In using the content center, I see one has to specify the location of instanced content center parts under options>file>>Default Content Center files. Is there no other way to get the instanced content center parts to save under the specific project file location without changing it manually each time via options>file>>etc. Is there a setting under projects?
I´m trying to create an external iLogic rule that let´s the user specify a path and saves an assembly and all it´s components into one directory. Alternatively it could be the main workspace path which doesn´t have to be specified by the user so it can be handled internally.
The background is a design template that resides on a network storage which can be configured through an iLogic Form and when the user is done configuring the assembly to it´s liking it should be saved to it´s workspace.
I was looking through the snippets but couldn´t find anything related to "save all". I have the feeling that I have to cycle through all component occurences and save them one by one.
Getting a Save As dialog box seems to be possible as I could see on Curtis Waguespack´s blog but the commands he is using are nowhere documented. For example for calling the dialog box he is using
InventorVb.Application.CreateFileDialog(oFileDlg)
In my quest to remove any unnecessary clicks I want to be able to set the default location when you press Save, Save As, Demote or 'Save and replace component'.
Default it will show up a file save as dialogue starting from my workspace. Or my last saved location. I believe this is stored in the registry and hope to Intelligent adjust these registry value's using VBA.
When diving into the registry I believe I found the right keys here:
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialog
Problem 1:
- if i change them manually I don't find a difference in Inventor (If I change other things in the registry, this has an effect)
Problem 2:
how do I set them automatic using VBA? I've got the strings sFileLocation & sFileName true the rest of my code. So I would need to do something like:
Dim oRegFileSave as Regisry entryset oRegFileSave as
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialogLastFileSaveDialogoRegFileSave = sFileLocation & "/" & sFileName
For your information, these are the registry entry's I believe I need to adjust:
I would like to have our newly created Content Center parts end up in a vault folder location unique to them. This will manage our conversion from the standard parts to our custom parts. Unfortunately, Inventor automatically saves these to the en-US folder. How can I set parts to automatically save to the Content Center/Roberts Standard Parts location as shown (attached) when they are inserted in an assembly.
View 2 Replies View RelatedI created a template and changed some style properties. I can not save to master location and when I open the template is tells me it is going to override my custom style.
How do I save out my custom style to the defalut location?
Is there a way to change the default save location for imported components? I can't stand the default "Save in Workspace" option which creates the dreaded & useless (IMHO) "Imported Components" folder.
I know how to change it during an import by clicking the "Options..." button. But if I or another one of our users forgets to do that, then things get saved to the "Imported Components" folder. This becomes particularly annoying with library files.
I cant't save copy as PDF when I point to a nework location, It's working when I save directly on my computer.
I get a message saying : "Failed to publish DWF file."
The default file location for the template .dwt file in my AutoCAD options keeps resetting to None (see attaached, red arrow). It should be the same location as the line below it (see attached, green arrow). I have reset it a few times now, but it keeps reverting back to None. Do you know why this is happening and/or how I can fix it so the setting will stay?
View 2 Replies View RelatedI have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
I am looking for the location of the setting that controls the background of paperspace. Not the printable area, but the background. See image below.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
In Photoshop CS3 is there a way to save a file so it's compatible with CS2? I'm working on a file in CS3 and when the file is opened in CS2 there are "layer is corrupt" errors.
View 3 Replies View RelatedAND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
I'm having trouble with PE 12. It is not saving new versions of files in version sets even though I select the option to do so when I save-as from the editor.
Also, when I create a new file, say a photomerge panorama, it does not include it into elements even though I have selected the option to do so.
This appears to be a bug (or 2).
After using "edit in" to take an image from LR3 to CS5, I would then save the edited image by "save as" then add -1 for an edited version, -2 for b&w, -3 for a funky edit, etc. (i.e. name-1 or name-2 would be typical file names) They would all save to lightroom. However, since I upgraded to LR4, I can't do that anymore or it doesn't save the image in LR. This has thrown my whole workflow out of whack - especially since I want to use the album module and need those versions of the images for the album.
View 1 Replies View Related1. Where is the Maximize Compatibility option in CS6 to save to earlier versions?
2. Does this option still exist in CC? If so, how is it enabled?
Perhaps I have changed a setting inadvertently, although lately the following has been occurring when using the built in AutoCad DWG to PDF plot:
- if I plot a single sheet, I can choose the save location and it is all good
- if I go file publish and print multiple layouts at once (into the pdf), I am not given the option of where it can be saved, instead it is saved in the location the last pdf was (annoying when that is different job folders etc)
What do I need to change to fix it so I can always choose the save location?
Using 2011 on W7 64 bit machine. When I try to set the location for the "Autosave File Location" or the "Temp Dwg File Location", I get the attached error message. I've done everything I know to fix it to no avail. I am on my personal laptop, I am an admin will full control rights of course, I've made sure the folders are not read only...
View 7 Replies View RelatedSome how the variable for saving the dwg file has changed. So, when I save a dwg, I get the prompt for me to type in the file name. What the setting is to change it back?
View 9 Replies View RelatedI would like to use iLogic to switch my design (rather complex assembly) between the 'full' version, a 'simple' version and a 'FEA' version. I'm learning Inventor step by step and did not studies the making of drawings yes.
I'm not sure if it is ok to use iLogic for this purpose because I'm afraid my drawings will update to the simple' or 'FEA' versions. This is not what I want. And when using the 'FEA' version, will the FEA information get lost when I switch back to the 'full' or 'simple' versions?
Or in other words: Is it wise to use iLogic for this purpose?
Is it not possible to save the published files location to the DSD file?
I am trying to setup different published sets to different folders (multi-sheet and single-sheet) but have no success on changing the default file location in Publish Options.
As I know, .tmp files will be saved to C:Usersuserappdatalocal emp...And how about atmp files? I dont want see this in our drawing folder.
View 1 Replies View RelatedBy default Content Center creates the sub-directories 2012, 2011, 2010 etc. to store the generated content center instance files. I have never changed this behavior. Why is it required to maintain these files in the existing separate directories? I don't intend to use a previous release of Inventor once upgraded.
I can see that there is a good possibility of generating the same content center instance in multiple directories ie: if you created a 1/2" nut in the 2011 directory and then there is a good chance of doing it again in the 2012 directory.
I would like to migrate all the files in those directories to my current release 2012 then place them in a common "generic" directory without separation into yearly subdirectories. Would this cause any serious issues?
I know I'll probably be resolving links for a while, but I can deal with that as long as Content Center still works after that. I would of course change the default location to my "generic" location.
i have been provided a library for a plugin i have recently purchased. The library was kindly given to me but it isnt actually part of the addin so it comes with no support. It appears that it has been created in 2014 whereas i have 2013.
Can it be downgraded without downloading & installing 2014?
Can a library be downgraded to 2013 from 2014 without opening & saving each file separately? there are approx 1500 parts
parts are not interoperable within the software. There cant be that much difference between a 2013 & 2014 file surely.....
I have 2014 Inventor Professional at my home and I am working on a project. I would like to work on it at work on 2013 Inventor Professionl. Is there any way I can make my 2014 file open on Inventor 2013?
View 1 Replies View RelatedHow to set & save a standard setting for all the new sheets that we work on? For eg: the dimensions, the text size etc.
View 4 Replies View RelatedI was explaining to my sister how to use "save the web" but it turns out she has PS 4.0 and says she doesn't see that option anywhere.
Does anyone know where in PS 4 she would find this option or it's equivalent.
I am having an issue with Backburner (2013.0.0 & 2013.0.2). I recently tried to render a 2011 3ds Max File Through backburner and since then I have been getting this error:
INF Sending instructions for job '(File name)' to (computer name)
WRN Task Error for (computers name)
ERR Job '(file name)' (Autodesk 3ds Max 2013 (64-bit)) failed for Cosmo
ERR Error message: 3dsmax adapter error : Autodesk 3dsMaxDesign 15.0 reported error: Error writing to file "(out put location)".
My render farm and Backburner were working perfectly before this (using 3ds Max Design 2013 and Backburner 2013.0.0), however, ever since I tried to render out the 2011 file I am unable to render even fresh Max 2013 files through Backburner. I don't know if this is important info but the 2011 file was worked on in Max 2011 and 2013.
I rendered out the scene through 3ds max (not Backburner) and was able to save the the Jpegs to the same output location that I need to save to when rendering with Backburner (I have an external network drive so all the nodes can access the necessary data). When I change the file output to my Desktop Backburner works correctly and I do not get this error, however, I need to set the output to the network drive. I tried installing backburner 2013.0.2 and the hotfix file.