I installed 2012 a couple of months ago and have been working with it just fine. Recently, I cleaned up my computer and uninstalled earlier versions (2009,2010,2011) . Now, I am getting errors such as:
- error initializing sheet set manager
-etransmit not working
I had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies View RelatedI've been tasked with creating electronic versions of some older AutoCAD drawings for which only hard copies exist. There are a lot of them, so in an effort to expedite the process I thought I would try to scan the drawings and scale them appropriately so that I could just go through and trace the lines. I was planning on doing some sanity-checks of the measurements in the AutoCAD and actual drawings as well. This would save me the time of having to measure the length and angle between each of the lines on the drawing (to which there are wild variations) before drawing them in AutoCAD.
The problem is that these drawings were printed on some really large paper (Ex: 4ft by 6ft), so I can't really use a desktop scanner. My thought was that I could mount the drawings on a wall and take photographs of them using my camera instead. I would use the photographs to trace lines in AutoCAD.
we have bought aclt 2013 and we have got a problem with some files created wtih older versions of aclt.When we try to open the file (plan), the file name appears but the progress bar don' t move then the file close.
HP Z620 12Go W7x64
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedI have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
A customer has PS 5.0, 5.5 and 7.0 installed. He needs to free up disk space. Can he safely uninstall the older versions without compromising 7.0 or are there files common to 2 or more installations that will cause 7.0 not to work?
View 3 Replies View RelatedI purchased the Photoshop CS about 5 years ago. My machine became dead and I no longer have the CD with me but I saved the serial number. Could I download this old version again?
View 7 Replies View RelatedI installed PS CS6 on the same MacBook Pro as CS5. CS6 did not prompt me to migrate settings on first run. Edit->Presets->Migrate Presets returns
There are no presets to migrate from the older versions
I re-installed PSP X5 on new computer and no longer have masks from previous versions of PSP. Is there a source where I can download these legacy files?
View 5 Replies View RelatedI have used the 30 day LR5 trial and I don't love it and prefer LR3 that I have been using for the past few years. I've created some libraries though, and want to know how I can view them if I return to using LR3 after the trial.
I didn't import the images to Lightroom, rather, I referenced them on my HD.
Do I need to export them as an older version? Or save the images in another format?
I have heard that the new Photoshop CC uses a new file system that is not compatible with older versions of Photoshop so you can only edit them in the new Cloud version of Photoshop CC.
View 7 Replies View RelatedIs there a way to make PS X4 open up images the way it did in older versions... i.e. each image opens up as a stand alone floating box so I can have them side by side? (See attached image)
View 2 Replies View RelatedWhen I try to use PSPx5 to open .psp images created with older versions of PSP, I get the message that they can't be opened.
View 5 Replies View RelatedAre brushes/sets created in CC compatible with CS and/or older versions of Illustrator +Photoshop?
View 1 Replies View RelatedI just started using the new Indesign CC and one of the features that I miss is the blue outline that would appear around textboxes. It would allow me see where my text was and move it around. The new Indesign CC displays text, but with no outline around the text, which makes it difficult to re-adjust the box size and move around my text.
Is there a way to enable the text box outline to show when designing (not when printing) as the previous verisons of InDesign did?
As I have done for years I shoot in RAW and use Nikon transfer to load images from the card to my laptop and external drive. AFter I sort the images by subject I import them to Lightroom for the final touches. Not so with Lightroom 4.2 and Nikon D600..Adobe says if yousue transfer than 4.2 will not recognize the files and too bad ...as a company they are going downhill..I hope they correct the problem so I can import the 1500 images into Lightroom for final conversions.
View 3 Replies View RelatedI was explaining to my sister how to use "save the web" but it turns out she has PS 4.0 and says she doesn't see that option anywhere.
Does anyone know where in PS 4 she would find this option or it's equivalent.
I have upgraded over the year and now have versions 7 through CS3 residing on my system. Can I uninstall all these older version?
View 2 Replies View Related have two questions:
1: I currently am using AutoCAD 2011 is there any option to back save drawings to 2008? I do not seem to have this choice.Only 2010 or 2007 or 2004.
2: If I upgrade to 2014 or 2013 will I have the option to back save to 2008?
Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies View RelatedI am using the Student version of Autodesk inventor 2013.I was able to use the simulation, stress analysis features for a period of 10 days from the day of installation but its not working now.I have tried reinstallation also. I am using a registered version only.
View 2 Replies View RelatedMy desktop at home is a Mac 10.5 so I'm using LR3. I just bought a new MacBook Air and I've installed LR4 on it. Is it possible to work on a single dropbox-saved project from both Macs?
View 4 Replies View RelatedI am using PSCS 3 and I have a wacom Intuos 2 tablet I used to use. Recently I hooked it back up as I am going to start doing more illustration (just been doing photography and using lightroom).
PS is not reacting to the sensitivity settings. I downloaded the latest Wacom drivers today and when I open the wacom control panel the setting show the pen sensitivity is working. In the PS brushes panel I have tried "shape" dynamics and "other" dynamics both set to "pen presure" and still no effect. I've tried adjusting the sliders from 0%, to 50% and 100% all with no effect. Also for some reason PS does not recognize the eraser. It just acts like the pen. Again, in the wacom control panel when I look at the eraser it recognizes it (doesn't resond if I use the pen side).
Even though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedI am having an issue with the "select sketch features" selection filter. Specifically, it does not seem to work within the edit-in-place environment. If I am sketching on a part that has been opened discretely, selection functions normally. However, if I am editing within an assembly and I attempt to work in a sketch, face selection takes priority over selecting dimensions or sketch features despite the sketch features filter being active. I have not always had this problem, and it began approximately a month ago. I can't think of anything I might have changed to cause this, but I'm wondering if there's an option somewhere that I accidentally toggled.
Inventor 2014 SP1
Windows 7
So I have a CC subscription. The CC only feature of being able to apply liquify filter to a smart object is working fine but the new smart sharpen has no new noise reduction slider. Why are some CC only features working while others are not?
View 9 Replies View RelatedI've updated Photoshop CS6 yet there are new features missing or not installed. For example, the smart sharpening filter.
View 1 Replies View RelatedWhen I insert a drawing from another source as a block into one my drawing - and then explode the block and change the exploded block layers to my layers. Then I purge out the old layers. Normally this works fine, but I have lately had trouble getting rid of some unwanted layers as everytime I have tried, I get the message that they are x-ref dependent and cannot be deleted or purged. I have tried to isolate them by freezing and turning off everything else, but there are no features, entities, "specks" whatever, to erase. I have looked at the xref command, and my drawing shows no rogue xrefs. I am not sure what to do to get rid of these layers.
View 8 Replies View RelatedIs there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedMy Basic GPU features were working flawless with Photoshop version 13.0 After I update to version 13.1 for CC members all my GPU features stop working. Is there a form to set my Photoshop version 13.1 in order to use my GPU features or there is a huge difference between versions that doesn't allow me to use the GPU features?
View 5 Replies View Related
