Photoshop :: Older PS And Wacom Intuos - Sensitivity Not Working?
Aug 22, 2013
I am using PSCS 3 and I have a wacom Intuos 2 tablet I used to use. Recently I hooked it back up as I am going to start doing more illustration (just been doing photography and using lightroom).
Â
PS is not reacting to the sensitivity settings. I downloaded the latest Wacom drivers today and when I open the wacom control panel the setting show the pen sensitivity is working. In the PS brushes panel I have tried "shape" dynamics and "other" dynamics both set to "pen presure" and still no effect. I've tried adjusting the sliders from 0%, to 50% and 100% all with no effect. Also for some reason PS does not recognize the eraser. It just acts like the pen. Again, in the wacom control panel when I look at the eraser it recognizes it (doesn't resond if I use the pen side).
View 2 Replies
ADVERTISEMENT
Dec 25, 2013
I have it enabled in the tablet properties. Windows 7 64bit.
View 1 Replies
View Related
Feb 13, 2013
I have a Wacom Intuos 3 tablet, photoshop CS6 and Windows 7. The pressure sensitivity of my tablet won't work anymore. Roughly, it said to uninstall my wacom driver, unplug the tablet, reboot, install driver, plug in the tablet and reset my preferences in photoshop. I've done this last night and it worked, I was thrilled but it was late, was exhausted,When I turned it back on and went in photoshop this morning it didn't work anymore, pressure sensitivity was gone again. I get this little warning in my brush settings when I try to put it on Pen Pressure or tilt or other setting that requires pressure sensitivity, The only way I can get it to work is with the process I mentioned (uninstalling driver, unplugging tablet, rebooting etc...) but I'd need to do this every time I shut down my computer and that's a bit of a pain..I've also tried installing different drivers, the latest one first, when that didn't work I tried older ones to see if it would make a difference to no avail.
View 11 Replies
View Related
Nov 2, 2012
I'm looking to get a wacom tablet, but I'm not really sure what tablet it best for digital art and animation type stuff. I'll be using it with Photoshop CS6 and probably Toon Boom or some other animation software. I'm just not sure what the difference is between the tablets.
View 3 Replies
View Related
Sep 3, 2013
I recently became a subscriber to the creative cloud as well as recently getting a wacom intuos 5. The problem is, my new photoshop cc, does not show that I have a pressure sensitve tablet.
Is there a new driver from adobe that I need to install? I checked the Wacom site and as far as I can tell I have the newest driver available. Also, I do have photoshop cs5.5 could these two versions of photoshop be causing a problem when it comes to the tablet?
View 1 Replies
View Related
Aug 14, 2004
regarding painting with my Wacom tablet.
When I use the brush tool in CS, it defaults to pressure effecting the brush size. I want the pressure to effect the opacity instead. I have looked all through my brush options, etc.
View 1 Replies
View Related
Feb 26, 2012
My Intuos 3 tablet and pen do not perform correctly using CS5. The same machine, using the same tablet and pen and the same brush, with CS3Â and Corel Painter function correctly so I am assuming it's CS5 that's the problem. The brush seems to set an anchor point where the pen first contacts the tablet, then no matter where you draw with the brush nothing happens until the pen is lifted, then a straight line is drawn from the anchor point to the point where the pen lifted. Problem is with CS5 x32 and x64 both. Happens every brush stroke. Mouse works fine. Reset the preference file. Upgraded drivers for the tablet. The machine is an HP, quad core processor, 8 GB ram, with an ATI Radeon HD 3200 Graphics card. The machine came loaded with Vista 64 and I upgraded to Windows 7 at the time I installed CS5.
View 9 Replies
View Related
Mar 5, 2012
my brand new intuos 4 and set things up and start using it; I installed the software and downloaded new drivers the tablet and pen function well enough will the mouse pointer full functionality in windows however none of my express keys or touch ring functions work; same with if I create a new keyboard shortcut button for my pen buttons ie to select the brush tool or "b" I understand this is more of a Wacom issue. I have sent an email into Waxom tech support regarding this and waiting to hear back.
View 1 Replies
View Related
Nov 17, 2005
i have a G5 dual and 3 Gig of RAM. why is my tablet making PS so sluggish? when i paint/erase (even a small area) it takes several seconds after i lift the pen before i can do my next edit. it's the only program running and the file only has three layers.
View 5 Replies
View Related
Aug 13, 2009
Very light paint strokes on my Wacom Intuos 3 produce a full force stroke in CS4 every 3 to 15 strokes. Anybody else have this problem? This does not happen with CS2. Also, using the Wacom diagnostics, I can make endless light strokes and never see the pressure go above 16%. I'm using CS4 11.0.1, Wacom driver 6.1.1-3, Nvidia GeForce 6800 with drivers updated, Windows XP.
View 3 Replies
View Related
Apr 16, 2012
I have been using LR2 v2.6 along with wacom intuit 4 for several years. All of a sudden, several months ago, both started freezing up. In looking at the problem details it shows that the tablet.dll is unloaded.
View 8 Replies
View Related
Jul 28, 2012
I am a long time gimp user and also a long time intuos user and I just recently got the airbrush pen for my intuos. I am running windows 7 and gimp 2.8. I am trying to figure out how to get the wheel on the airbrush pen to do something like adjust occupancy for example but I cant get any wheel settings to work. I am not sure if gimp recognizes that its a different pen. Any airbrush pen or a pen with a wheel in gimp
View 1 Replies
View Related
Mar 23, 2012
Does Xara support this pen or others, and if so, how does it stack up in terms of what types of pens and or tablets some of you are currently using? Secondly, does Xara support video frame rotoscoping at all like Painter does?
View 9 Replies
View Related
Jul 18, 2013
I got this issue since I got my new windows system.Â
Â
I do my daily Photoshop session with my Wacom Intuos 4, then randomly later, sensitivity of the pen turns off. The only way to recover the problem is to reboot Photoshop and sometime the whole system.Â
Â
why it doing that?
Â
I downloaded the latest Wacom drivers and Photoshop CS4 is up to date and the problem still persist.
View 1 Replies
View Related
Oct 21, 2013
I've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great. I recently purchased Lightroom 5.2 only to discover that when I use the spot edit tool that it freezes when i use this tool as a brush. It starts off smooth, but after brushing across my area i want to clone/heal, Lightroom seems to freeze up, and the spot edit tool is unusable. I can lift my pen off the tablet and a few seconds later Lightroom comes back, but the tablet is basically unusable to me. The mouse works perfectly fine.
Lightroom version: 5.2 [922700]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601][code].....
View 1 Replies
View Related
Mar 25, 2013
I bought a Wacom cintiq 22hd online and before it arrived I imagined before it came that all I would have to do is plug it in and install the software and that would be it but no....Â
This turned out to be a real nightmare to use, first after I finished calibrating the tablet this annoying loading circle kept appearing around the point every time I tried to draw something, Then after I had been able to fix it from running around the internet looking for solutions the pressure sensitive feature stopped working I looked around again to find a solution and people were saying update the driver software and I did then after rebooting my machine it no longer works and every time i tried to view the tablet settings it kept saying "THE TABLET DRIVER WAS NOT FOUND"
I had to uninstall the driver and recalibrate it and the pressure sensitive feature still isn't working. Personally I think this is complete BS I can't understand why Wacom a highly regarded company would delibratelly make their tablets more complicated to use than they need to be, I really am clueless as to what I can do to fix this I don't think reinstalling the "WacomTablet_635-3" driver software. What I can do I am using Windows 7 64 bit
Well because i went to the wacom forum site to try and get some answers but when I went to go sign up for an account it kept saying that my criteria was invalid even though it wasn't another reason to loose faith in Wacom and their useless business structure and unuseful customer support.
View 1 Replies
View Related
Mar 6, 2012
Is it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
View 6 Replies
View Related
Sep 20, 2011
I followed the instruction in the Mudbox help > Appendices > Tablet Setup including installing the latest drivers. Everything seems to work fine except pen pressure has no influence on brush size or sensitivity. One other post mentioned he had to roll back to a previous driver version.
View 2 Replies
View Related
Nov 28, 2012
I prerfer to use my Wacom pen/tablet (wide A5 size; almost A4 in landscape mode) when working in LR4 but I find it far too sensitive when working in the Develop module. For example the smallest movement I am able to make with the pen can change exposure by 0.2 (EV, I assume). which can make a very big difference to the image. Even the action of lifting the pen off the tablet, having 'set' a value, causes the value to change by an unacceptable amount.
Â
Surely this is not how it should work, is it? I am having to use keyboard input to enter values to get what I want.
View 2 Replies
View Related
Sep 17, 2012
Is their a way to get the pressure sensitivity of my Wacom Bamboo Capture tablet working with GIMP. Is tablets pressure sensitivity still unavailable to GIMP 2.8.2 Mac OS X?
View 9 Replies
View Related
Feb 23, 2011
I Bought a Wacom Bamboo Tablet when I first discovered Paint.net and then soon after they removed pressure sensitivity from the software. So now any plugin created for it so I can use my Tablet again.
View 2 Replies
View Related
Jul 11, 2012
In Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random. Â
Â
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
 Â
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
 Â
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]Â
Â
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
Â
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
View 13 Replies
View Related
Feb 9, 2013
I have just purchased a Microsoft Surface Pro in anticipation of running Photoshop on it. I installed Photoshop and tried to do some sketches. I created a new file and started sketching. I Immediately felt like something was wrong. I checked my brush settings and saw the pressure sensitivity was not available. Everytine I tried to turn it on it was marked with an exclamation point.Â
Â
Does Adobe is supporting the new pressure sensitive pen from microsoft, or if there is some sort of setting that I am missing? I have tried sketchbook pro 2011, and that works amazingly well with the pen.Â
View 13 Replies
View Related
Jan 7, 2014
I am using GIMP 2.8, and the brush dynamics do not seem to work. Whenever I use Pressure/Opacity, no matter how hard or light I press, nothing happens to the opacity.
I tested my tablet's pressure sensitivity using the built in pressure test. Everything seems fine. It works fine with Photoshop CS2, but I want to use GIMP.
Everything seems fine when I use Speed/Size & Opacity.
Additional Information:
OS: Mac OSX 10.6.8 Snow Leopard
Tablet: Huion H690
GIMP: 2.8.2
View 6 Replies
View Related
Feb 20, 2013
Whilst drawing in either photshop or SAI, the pen pressure sensitivity would just randomly fail and draw solid thick lines as if drawn with the mouse.See image:
What I also learned, is that once the pressure sensitivity falls out, it doesn't recover until I lift the pen away from the tablet, and then back again, as seen in the following pic:Sometimes it would fail on the 2nd brush stroke, others on the 100th. It's completely random.
Â
What I have tried to fix the problem:
Â
Complete removal of drivers and Bamboo dock, then fresh install from the bundled disc.
Complete removal of drivers and Bamboo dock, then fresh installation from the lates driver download (PenTablet_532-1)
Updated nVidia drivers.
Updated motherboard drivers.
Tried differnet USB ports.
[code]....
View 2 Replies
View Related
Dec 14, 2008
I have Wacom Bamboo Fun with latest drivers, use Vista 64 and run PS in 64bit mode. I uninstalled CS3 before installing CS4. The tablet worked in CS3 as expected, but CS4 ignored pen pressure - it always worked like mouse - with maximum pressure. In order to fix this problem I uninstalled and reinstalled Wacom drivers and cleared PS preferences by starting PS with Alt-Ctrl-Shift. Now Photoshop ignores the tablet completely - the cursor won't move and I need to use mouse to navigate in Photoshop.
View 4 Replies
View Related
Jul 24, 2008
I own a Wacom tablet and I've used it for about a year now.. and now that I mostly use my Laptop, I use the wacom tablet as a mouse pad (using the mouse that comes with it). I opened up photoshop today on my laptop and I was trying to erase some things using the brush command and it didn't work.. after an hour of panic and googleing I had the idea of using the pen.. which works.
I've deleted preferences, reset tools, and everything.. but its not working. No brush commands work (Clone, Brush, Eraser, etc.) but everything else will work.
I don't get it.. Is it something with pressure maybe?
Thats the only difference between mouse and pen.. pen adds pressure sensitivity.
I can't use the pen for pixel editing as well as I can use a mouse.
View 2 Replies
View Related
Apr 20, 2012
I installed 2012 a couple of months ago and have been working with it just fine. Recently, I cleaned up my computer and uninstalled earlier versions (2009,2010,2011) . Now, I am getting errors such as:
- error initializing sheet set manager
-etransmit not working
View 5 Replies
View Related
Jan 7, 2013
Yes, it's been well over a decade since I upgraded from my Wacom Intuos 2 pen/pad, but I think I've finally worn the thing into the grave. It had served me well, so I didn't see need to get any new versions--until now.
Â
So my question is, what do you recommend as an upgraded improvement? There's newer models of the Intuos pad/pen and there's also Bamboo pad/pens. I'm an illustrator that colors my work in great detail exclusively on Phtotoshop so I'd love to get a pen/tablet that handles all daunting assignments. And because I'm an illustrator, I can't really afford a Cintiq tablet, so I guess an Intuos of Bamboo are my choices.
My ancient Intuos 2 pen still works so-so but it suddenly started delaying and I find I have to tap the pad with the pen to get the cursor to move in the area I want it to. I installed the Intuos 2 driver again but nothing's changed. Yep, time for new tools.
View 4 Replies
View Related
Mar 27, 2005
I do a lot of montage work in PSCS and have recently been using my Wacom tablet and boy do I love it, but have a question for those of you who use tablets.
When I'm doing a montage I use very soft brushes to merge the edges. With my Intuos pen, even though I use a large soft brush setting (same as the one I use with a mouse) I get very pen like lines, so I always end up switching to the mouse. Do I need to do something with either the pen settings or the way I use it, or should I be getting an "airbrush" for this kind of work.
View 1 Replies
View Related
Nov 4, 2013
Photoshop CC pen tool nib is erratic, can I adjust the sensitivity?
View 1 Replies
View Related
