I have been using LR2 v2.6 along with wacom intuit 4 for several years. All of a sudden, several months ago, both started freezing up. In looking at the problem details it shows that the tablet.dll is unloaded.
View 8 RepliesI'm looking to get a wacom tablet, but I'm not really sure what tablet it best for digital art and animation type stuff. I'll be using it with Photoshop CS6 and probably Toon Boom or some other animation software. I'm just not sure what the difference is between the tablets.
View 3 Replies View RelatedI've been using Photoshop 6.x with my Intuos 5 for almost a year and it's been great. I recently purchased Lightroom 5.2 only to discover that when I use the spot edit tool that it freezes when i use this tool as a brush. It starts off smooth, but after brushing across my area i want to clone/heal, Lightroom seems to freeze up, and the spot edit tool is unusable. I can lift my pen off the tablet and a few seconds later Lightroom comes back, but the tablet is basically unusable to me. The mouse works perfectly fine.
Lightroom version: 5.2 [922700]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601][code].....
I recently became a subscriber to the creative cloud as well as recently getting a wacom intuos 5. The problem is, my new photoshop cc, does not show that I have a pressure sensitve tablet.
Is there a new driver from adobe that I need to install? I checked the Wacom site and as far as I can tell I have the newest driver available. Also, I do have photoshop cs5.5 could these two versions of photoshop be causing a problem when it comes to the tablet?
regarding painting with my Wacom tablet.
When I use the brush tool in CS, it defaults to pressure effecting the brush size. I want the pressure to effect the opacity instead. I have looked all through my brush options, etc.
My Intuos 3 tablet and pen do not perform correctly using CS5. The same machine, using the same tablet and pen and the same brush, with CS3Â and Corel Painter function correctly so I am assuming it's CS5 that's the problem. The brush seems to set an anchor point where the pen first contacts the tablet, then no matter where you draw with the brush nothing happens until the pen is lifted, then a straight line is drawn from the anchor point to the point where the pen lifted. Problem is with CS5 x32 and x64 both. Happens every brush stroke. Mouse works fine. Reset the preference file. Upgraded drivers for the tablet. The machine is an HP, quad core processor, 8 GB ram, with an ATI Radeon HD 3200 Graphics card. The machine came loaded with Vista 64 and I upgraded to Windows 7 at the time I installed CS5.
View 9 Replies View Relatedmy brand new intuos 4 and set things up and start using it; I installed the software and downloaded new drivers the tablet and pen function well enough will the mouse pointer full functionality in windows however none of my express keys or touch ring functions work; same with if I create a new keyboard shortcut button for my pen buttons ie to select the brush tool or "b" I understand this is more of a Wacom issue. I have sent an email into Waxom tech support regarding this and waiting to hear back.
View 1 Replies View Relatedi have a G5 dual and 3 Gig of RAM. why is my tablet making PS so sluggish? when i paint/erase (even a small area) it takes several seconds after i lift the pen before i can do my next edit. it's the only program running and the file only has three layers.
View 5 Replies View RelatedVery light paint strokes on my Wacom Intuos 3 produce a full force stroke in CS4 every 3 to 15 strokes. Anybody else have this problem? This does not happen with CS2. Also, using the Wacom diagnostics, I can make endless light strokes and never see the pressure go above 16%. I'm using CS4 11.0.1, Wacom driver 6.1.1-3, Nvidia GeForce 6800 with drivers updated, Windows XP.
View 3 Replies View RelatedI am a long time gimp user and also a long time intuos user and I just recently got the airbrush pen for my intuos. I am running windows 7 and gimp 2.8. I am trying to figure out how to get the wheel on the airbrush pen to do something like adjust occupancy for example but I cant get any wheel settings to work. I am not sure if gimp recognizes that its a different pen. Any airbrush pen or a pen with a wheel in gimp
View 1 Replies View RelatedI am using PSCS 3 and I have a wacom Intuos 2 tablet I used to use. Recently I hooked it back up as I am going to start doing more illustration (just been doing photography and using lightroom).
Â
PS is not reacting to the sensitivity settings. I downloaded the latest Wacom drivers today and when I open the wacom control panel the setting show the pen sensitivity is working. In the PS brushes panel I have tried "shape" dynamics and "other" dynamics both set to "pen presure" and still no effect. I've tried adjusting the sliders from 0%, to 50% and 100% all with no effect. Also for some reason PS does not recognize the eraser. It just acts like the pen. Again, in the wacom control panel when I look at the eraser it recognizes it (doesn't resond if I use the pen side).
Does Xara support this pen or others, and if so, how does it stack up in terms of what types of pens and or tablets some of you are currently using? Secondly, does Xara support video frame rotoscoping at all like Painter does?
View 9 Replies View RelatedIs it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
I have it enabled in the tablet properties. Windows 7 64bit.
View 1 Replies View RelatedI prerfer to use my Wacom pen/tablet (wide A5 size; almost A4 in landscape mode) when working in LR4 but I find it far too sensitive when working in the Develop module. For example the smallest movement I am able to make with the pen can change exposure by 0.2 (EV, I assume). which can make a very big difference to the image. Even the action of lifting the pen off the tablet, having 'set' a value, causes the value to change by an unacceptable amount.
Â
Surely this is not how it should work, is it? I am having to use keyboard input to enter values to get what I want.
I have uninstalled PS CS6 and Lightroom and reinstalled PS CS6 then LR4.1. When I select EDIT IN Photoshop CS6, PS opens but freezes after a few seconds and the file is never transferred into PS. Files will open when I select other 3rd party editors like Photomatix Pro.
Â
LR Version 4.1
Camera RAW version 7.1
Photoshop Version
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Â
System Information:
Â
Operating System: Windows 7 64-bit
Version: 6.1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 2812 MHz
Built-in memory: 16382 MB
Free memory: 12911 MB
Memory available to Photoshop: 14680 MB
Memory used by Photoshop: 70 %
Image tile size: 132K
Image cache levels: 4
The GPU Sniffer crashed on 5/31/2012 at 6:40:23 PM
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5570
I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding.
View 7 Replies View RelatedUpon opening program it has begun to freeze. I have researched and discovered that I have a file in my catalog lrcat.lock. I have deleted the file and sometimes the program will work normally. Then for no apparent reason it will lock up again upon reopening. I go back to the catalog and the lrcat.lock file is back.
View 3 Replies View RelatedLightroom 4.2
Windows 7
Wacom Intuos 5
Â
When using the Spot edit tool and my Wacom stylus it freezes lightroom for several seconds on certain files. Same file types and locations may not have the problem, but some do. Has happened on TIFs, PSDs and cR2s. The cursor disappears and will not show when placed over the LR window. I can access other windows and the cursor works fine. It does not tell me the program is not responding, but I can't do anything with it. After 30 seconds or so the cursor shows up and I can work. However, if I try to use the stylus and spot edit tool again on the same image, it will cause the cursor delay again. If I use my mouse, no delay. Sometimes it does not happen with Wacom stylus. From user stand point appears to be random which files it happens and which it doesn't.
Yes, it's been well over a decade since I upgraded from my Wacom Intuos 2 pen/pad, but I think I've finally worn the thing into the grave. It had served me well, so I didn't see need to get any new versions--until now.
Â
So my question is, what do you recommend as an upgraded improvement? There's newer models of the Intuos pad/pen and there's also Bamboo pad/pens. I'm an illustrator that colors my work in great detail exclusively on Phtotoshop so I'd love to get a pen/tablet that handles all daunting assignments. And because I'm an illustrator, I can't really afford a Cintiq tablet, so I guess an Intuos of Bamboo are my choices.
My ancient Intuos 2 pen still works so-so but it suddenly started delaying and I find I have to tap the pad with the pen to get the cursor to move in the area I want it to. I installed the Intuos 2 driver again but nothing's changed. Yep, time for new tools.
I do a lot of montage work in PSCS and have recently been using my Wacom tablet and boy do I love it, but have a question for those of you who use tablets.
When I'm doing a montage I use very soft brushes to merge the edges. With my Intuos pen, even though I use a large soft brush setting (same as the one I use with a mouse) I get very pen like lines, so I always end up switching to the mouse. Do I need to do something with either the pen settings or the way I use it, or should I be getting an "airbrush" for this kind of work.
I am working with "photoshop cs3" "windows ultimate vista" and an "wacom intuos 3" tablet and I experience heavy lags while drawing like the brush-strokes don't quite follow my moves, and I have to wait for them to catch up.
When I open a large file and I try to apply the first brush stroke on my drawing the cursor screen disappears for a while and photoshop is not responding. Then Photoshop comes back so the cursor and I can start to work. But as soon as I drag the page using the little Hand tool photoshop stops responding again for few more seconds and when it restarts I can hardly control the direction of my new brush strokes.
Apparently in order to restart the only remedy I found (by chance) is by toggling the layer visibility status (change a layer from visible to not and back to visible again). After this exercise I can draw in photoshop again! But of course same problems again as soon as I will use the hand tool and move on the screen again!
I just got my wacom intuos A5 USB a couple of days back and its working perfectly on my mac. No issues at all but I tried using it on my desktop and im having 2 major issues. 1. I have only "other dynamics" checked and opacity controlled by pen pressure. If i am making light strokes with the pen i get a few low opacity strokes is i should but I suddenly get a full pressure (100% opacity) stroke even though im hardly applying and pressure. These are sudden pressure spikes and are completely random. 2. The pen tilt is not working. I set color dynamics to pen tilt but the color doesn't change as i tilt the pen All this works perfectly on my mac so I know theres nothing wrong with the tablet but how do I solve these issues. Im hoping someone here will help me out. P.S. - I have an Intel 2.5 Quad Core, gigabite Mother board, 4gb ram, nvidia GeForce 6600GT - 256mb. I also have a beetel router connected to my desktop.
View 11 Replies View Relatedwhich is better, the intous tablet or the graphire tablet? judging from the price, i guess intous would be better, but i want to hear from people who have actually used them. also, can you use them with photoshop?
View 4 Replies View RelatedMonth ago, I installed Photoshop cs6 extended on my windows 8 machine. My probelm is simply the following; everytime I run cs6 my whole computer get frozen, so I have to go and force the shoutdown, like cutting the power. Sometimes I get lucky and photoshop works, then for some reason it freezes again.
I reinstalled it many times, I even reinstalled windows 8. I started to feel that this frequent crashes are even curropting my windows 8 files, in a point that windows 8 sometimes cant get to load from the first time so I hae to repair it. Windows 8 by the way works great with me, until I install and use photoshop. Now I have got a load of work that I cannot do because I cannot run Photoshop properly.
Â
These are some information about my PC:
OS: Windows 8
Application: Photoshop CS6 Extended
Motherboard: Gigabyte GA-X58A-UD7 rev. 2.0
Video Card: Ati Radeon HD 5900
VC Driver: AMD Catalyst 12.10
# of screens: 3 screens ( 1920x1080, 1920x1080, 1024x768)
RAM: 12 GB
Processor: i7 X 980 3.33GHz
i work adobe phtoshop CS3, where i combine two images of the same watch and use mask to combinethem, but lately whenever i open two images, i drag one onto the other one, only my adobe phtoshop freezes. i tried adding more memory to my computer...
View 7 Replies View RelatedI am on the creative cloud and have down loaded and successfully installed PS6. I am a professional illustrator and use the Wacom tablet. My concern is with the pen pressure effect not staying on. I have went to option on PS6 and checked for updates and down loaded them with no results and called support as well .
I went to the Wacom sit as well to check to if my drivers are updated and they are, and called their support as well with no results. I understand that PS6 is a new product and that I may have to wait for patches, that is fine.
I need some input on buying a Tablet, I am looking at the Graphire2 and the Intuos2, I understand that the Intuos2 is better but does the Graphire2 work good with photoshop?
View 3 Replies View RelatedI'm thinking of getting one of these drawing tablets - but thought I'd ask you all about them.
Plenty of reviews in magazines, but I'd rather hear from people using them everyday.
Who here uses which tablet? What do you recommend?
NB I use a G5 Mac running OSX (10.4.6)
I have a chance to get a small Wacom tablet, its a older version ,screen size 4x5, It comes with all the software, Also has Elements 2.0 My question is,can I also use it with CS3?
View 3 Replies View RelatedI was using a wacom tablet in adobe cs3 just fine, now I get no tip sensitivity. As in, the pen will always draw a think line no matter how light I use the pen.
View 4 Replies View Related