Lightroom :: Opening Program - 4.4 Begun To Freeze?
Oct 22, 2013
Upon opening program it has begun to freeze. I have researched and discovered that I have a file in my catalog lrcat.lock. I have deleted the file and sometimes the program will work normally. Then for no apparent reason it will lock up again upon reopening. I go back to the catalog and the lrcat.lock file is back.
Every time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
We just discovered data at our office, and I am pretty stoked about them 90% of the time. We do have one problem with them though. We are doing a small road, with 10 or so alignments and a few pipe networks of 40 pipes and structures. 1 surface, and that is about it. I made a cross sections sheet with our design file xrefed and data references to everything in it. Now it won't open. I can copy it to my local hard drive, run a recover, and then open it, save it back, add in all the data references and redo labels, but I can't open it from there.
Is there some way to have it open without syncing?
i usually get stock at this screen , usually what happen is i click "Continue" and it load the video screen and i start working but now nothing ... just nothing when i had this before i try to restart sometimes work sometimes it's just load me the Autocad 2012 "Non-Civil3D" .
LR printed okay for about 1/2 of a job (~300 prints) I have and then this showed up. To finish I have had to "edit in CS5" now for a few days, thusly one image at a time and no info printed on the print either. After 2 days of printing good in CS5 it too began the dreaded "communication error".This did not happen until 2 weeks back. I spent days proving that the printer is "communicating" just fine. New cables, other programs etc. The printer driver has been reloaded dozens of times. The machine has been rebooted daily.
I do not think it has any relevance however, EVGA 655 MOBO i7 860 Intel 16 G ram Corsair EVGA GTX275 video Open GL is enabled in Preferences in CS5 Win7Ultimate
Printer is Epson R1800. Epson drivers installed. LR is 3.6 w/ all updates LR4 beta is on the machine but not what I try printing from.
I am working in PS 7 OS 10.1.5. I have a file that was working on, saving as I went along. I closed the file and when I tried to reopen it, the file would not open. I get a message ... File can not be opened because of a program error...
I am trying to set Maya as the default program to .ma and .obj files but it won't accept it as the program, it just stays on something like photoshop. This also happens to .3ds files when trying to set them to Max.
How do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edit> preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
I have Windows 7 64 pro installed. Tried the CC on Windows 8 64bit pro and they didn't play well together. Windows 7 seems to work fine. Good enough. So, I have the 64 bit version of PS CC pinned to the taskbar. When I click on it, it opens right up. Then if I go to Lightroom 5 and open a file, it opens right up in Photoshop CC 64 bit. However, if PS is not open and I open a file from lightroom, Photoshop CC 32bit opens. Not what I want.
Ok, so you say go the defaults menu and change the default opening program? Doesn't work. Switches right back to CC 32bit.
I recently upgraded to Studio X6 and downloaded service pack 1. I had this same problem with X4, and was in hopes X6 would eliminate it.
I open a project and I want to add a jpeg image, so I drill down to the folder where the file is located and it hangs there with the little blue circle going around, and no files appear and I get a message "Not Responding" I I must close the program or wait for it to respond, which it never does.
i installed coreldraw x6 about two weeks to try and i liked it so much and my windows gone down and when i reinstalled windows and reinstalled coreldraw and tried to open a file was created with coreldraw x6 it give me error and program closed.
the problem is:
Problem signature: Problem Event Name:BEX64 Application Name:CorelDrw.exe Application Version:16.1.0.843 Application Timestamp:4fff8c8c Fault Module Name:CdrFnt.dll Fault Module Version:16.1.0.843 Fault Module Timestamp:4fff8cc6 Exception Offset:0000000000009181 Exception c0000409 Exception Data:0000000000000000 OS Version:6.1.7601.2.1.0.256.1 Locale ID:4097 Additional Information 1:2ac4 Additional Information 2:2ac4c22809adbef32ecbe94fc4b7c7b9 Additional Information 3:d787 Additional Information 4:d787405ff983cb0cc3e60c8be69cf6a8
Read our privacy statement online: [URL]........
If the online privacy statement is not available, please read our privacy statement offline:
I just installed Autodesk Inventor Pro 2014 as a student for my engineering class and I have yet to get it to work properly. Every time I try to open the program, it will open to the main selection page. But the first click I do on the screen causes it to say 'not responding'. I have to close the program and try opening it again. The second time, it does not even get past the opening screen. It freezes and I end up having to log off of my user and log back in. I have the 64-bit version that matches my computer.
I am working on a picture file, jpegs, changing the size, the level, etc. I open several pictures usually 3 or 4 and when I try to open the next I receive a pop up error message that says: "Could notcomplete your request because of a program error.” This has just started to happen recently, probably since I upgraded to CS6. Previously I could work on a file and have 100 or so pictures open and still be able to open additional pictures. I have downloaded and in installed all availableupdates and the message I receive when I check for updates is:
“Your applications are up-to-date as checked less than a minute ago.” I tried to Edit>Purge>All, Reset Preferences, Deleted the Adobe Photoshop Ver. 6 Prefs.psp folder and pressed Ctrl+Alt+Shift on Photoshop startup and deleted Adobe Photoshop Settings file. Did not work, what next?
When I tap on an image in my Window's photo folder, a selection of programs pop up, but PS Elements is not one of the. When I press on browse, PS Elements 11 can not be found.
Whenever he starts Photoshop up, all of his auto recovery files open. For example - when he goes to open a psd of a web design, he will get about 25 files opening with the title "JobName recovered".
I had a meander around the forums looking for possible fixes and information about the Auto Recovery feature, but so far have not been able to cure this ailment.
I have previously disabled the Auto Recovery feature as well as deleting the auto recovery files, yet this was only had a band-aid to amuptation effect. The auto recovery files have reappeared and are now opening again upon start up.
I am using Windows 7 Pro. Recently I had some slowing down of system and found I had to clean up some Malware. System cleaned up but this error started show up on all trys to open program.
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3 2x2.66 GHz 6-Core Intel Xeon 64 GB 1333 MHz DDR3 CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
I have been using LR2 v2.6 along with wacom intuit 4 for several years. All of a sudden, several months ago, both started freezing up. In looking at the problem details it shows that the tablet.dll is unloaded.
I have uninstalled PS CS6 and Lightroom and reinstalled PS CS6 then LR4.1. When I select EDIT IN Photoshop CS6, PS opens but freezes after a few seconds and the file is never transferred into PS. Files will open when I select other 3rd party editors like Photomatix Pro.
LR Version 4.1 Camera RAW version 7.1 Photoshop Version Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
System Information:
Operating System: Windows 7 64-bit Version: 6.1 System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3 Physical processor count: 6 Processor speed: 2812 MHz Built-in memory: 16382 MB Free memory: 12911 MB Memory available to Photoshop: 14680 MB Memory used by Photoshop: 70 % Image tile size: 132K Image cache levels: 4 The GPU Sniffer crashed on 5/31/2012 at 6:40:23 PM OpenGL Drawing: Disabled. OpenGL Drawing Mode: Advanced OpenGL Allow Normal Mode: True. OpenGL Allow Advanced Mode: True. OpenGL Allow Old GPUs: Not Detected. Video Card Vendor: ATI Technologies Inc. Video Card Renderer: ATI Radeon HD 5570
I uninstalled Lightroom, because it was too slow on my computer. It put a lot of library files and directories in My pictures folder.
When I use a backup program (SyncbackSE) to backup my pictures, it starts to scan all the Lightroom library files and it takes forever (hours and counting). Even though Windows cannot find the directories (with hidden and system files shown). I want to completely delete the Lightroom directories, because now I can't backup my images anymore. It is a pain in the dark places.
I get the message: Lightroom - opening catalog: img_8955.cr2.lrcat, when I try to open the program. I havn´t used Lightroom for a while. Now I tried to reinstall from My Adobe with no success.
I cannot share photos from my Elements 8.0 Organizer via email. The program does not recognize that I have an email program loaded. The computer is a new HP desktop with Windows 7 Home Premium Service Pack 1 operating system. My Elements 8 does everything I need except for the photo sharing so I don't really want to purchase a new version.