every time I try to enter / alter text, autocad informs me that it can't find a dictionary for spell checking purposes. I can live with that, but the constant pop-up is getting old.
I tried to reset my Main Dictionary... but it seems to be gone. Is a fresh re-install in order?
See pic attached
text entering error.jpg
I use Gimp alot to make beautiful banners . I add text into them. The problem I am having [you are going to love this]. I made a beautiful banner for a friend and installed it on a website. [get ready to laugh] I spelled his name wrong. I put the banner back into Gimp but I can't figure out how to alter the text. Do I need to make a new banner or can this be changed??
View 2 Replies View RelatedSo I am running x6 ver. 16.3.0.114 and we use Corel for all of our artwork designs. However just as of yesterday, I am consistently crashing any time I add/alter and sort of text. Sometimes it's as simple as trying to change the font from the object properties tab. Others is as soon as I try to paste text into the program. I have had no issues up until yesterday.
No new programs were installed to my knowledge. Nothing was changed on my computer. Corel has simply spazzed out.
I'm trying to create a new design based on a grid, so I need pixel-exact text layers. For this I always use "None" as anti alias method. This is pixel-exact, but it's absolutely not beautiful. So from time to time I'd like to check how the full impression of the layout is on a modern browser that support anti aliasing. Sadly it's quite a pain to do and then again undo it for every text layer separately, so maybe there's a way to speed things up? :-)
View 3 Replies View RelatedI have been working on this framing plan and come to find out - much of the text and some of the lines are being entered off of the 0 - Z plane. get everything down to 0? Flatten does not work and I have searched high and low for a resolution, but I'm not getting anywhere.
I know the lines are mostly at 0, which makes it very confusing that the text would enter off of the 0 - Z plane.
I cannot seem to trap the Enter key in a text box.
I tried the following:
Private Sub tbEdit_6_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles tbEdit_6.KeyPress
If Asc(e.KeyChar) = 13 Then
[Code]....
I have done a drawing of some house plans. I am now trying to enter text in model space, but when i enter it, it appears very small at 2.5, only if i enter at 500 it appears ok. In the layout tab the text at 500 appears very large, and when i enter 2.5 it appears ok. I have not made any changes anywhere.
View 9 Replies View RelatedI am using AutoCAD LT 2014. Whenever I open a drawing, I receive the error message, ** Undefined shape XX with XX representing different numbers (50, 120, and 53). According to the KB, This error message is typically displayed when a required font style is not available for use. The solution is to copy the fonts from another computer but my issue is, I don't have another computer with the working fonts.
Additionally, I am unable to enter any text into the drawing using the Single line or Multiline tool. From MTEXT, whenever I enter any letters, I receive the same error message ** Undefined shape XXX.
My support file search contains links to all of the necessary files
C:Program FilesAutodeskAutoCAD LT 2014Fonts.
i have a drawing boarder that is a block with enter-able text fields for drawing revision etc but for some reason the order in which you would enter the rev's 1,2,3, etc is the wrong way round in the enhanced attribute box. So when i click and start typing i end up with 3,2,1 in the rev boxes.
View 9 Replies View RelatedI am writing a program that allows the user to select hatched areas in a drawing and return the quantity, area, and the weight for the equivalent areas covered by tread plate.
My goal is to insert the data with text at a point of the user's choosing, so the end result is a text object in model space that looks like this:
Total Objects: 2
Total Tread Plate Area: 20.83 sq ft
.125 AL Tread Plate Weight: 40 lbs
.125 Steel Tread Plate Weight: 128.33 lbs
How to do is to have the text appear on multiple lines, instead of all across one line. Is there a way to mimic the enter key to enter the next line of text, just like when you use the text function in AutoCAD, instead of using multiple text commands and having to position each one using code.
(defun c:tread (/ cnt tot ss p sqft alwt stwt)
(vl-load-com)
(setq cnt 0
tot 0
[Code] .....
Im using windows 8 and am on the trial version of Pshop, when i try to add a text box the the canvas goes black not allowing me to seeing what i am typing?
View 1 Replies View Relatedi try 2 enter text on a image.. any image.. i get an error message Could not complete request because somethign prevented the text engine from initilized.
View 2 Replies View Relatedlet's assume that i am writing my text for two buttons: a:hover and a:active statuses. i am entering the text "links" in the two different buttons (=images.) How do i make sure that the text is exactly in the same places and not entered randomly instead in each button? so that when i clic on the button the text is not "shifted" in some way, but remains in the same position (only the image changes. example button 1: /links button 2: /links
how do i make sure that the word "links" is exactly in the SAME position in both buttons?? thanks.
I've been using PS for a long time. I'm far from even beginner level, I'd say, but I know my way around well enough. I'm using PS CS6 on a Win 7 ENT machine.
If I open a new document, the text tool does nothing.If open a previously saved document, the text tool works just fine. So, I've taken to starting each new document by opening an older one, then modifying it.
Interestingly, in new doc, the text-entry point is exeedingly tiny and sits *inside* the upper left-hand resize box. In an previously opened file, it sits nicely in the upper left-hand corner of the box itself, patiently waiting at the preset font size.
PSPRo X.I double click on a jpg image in my pics (XP home) and it shows in the workspace.I click on the "A" text tool and then the background title of the image changes to vector 1.A horizontal blue bar at the top shows with "text entry and a x in it.Right clicking on the image does not do anything, the tools on the left are greyed out.I am unable to enter any text on the image.
View 6 Replies View RelatedI'm using Photoshop CS. I want to make a text, and then I press the enter button. But, instead of a second paragraph, the text overlays. How can I solve this problem?
View 4 Replies View RelatedOne minute it was fine so I know I must have hit something, but I can't fix it. When I hit enter while adding text it will not skip a space, it goes back to the original start point and types over the existing text.
View 2 Replies View RelatedSay I am moving a text box with the arrow keys and decide to edit it. To do so, I would have to leave the arrow keys and reach for the mouse to execute the text edit. How do I edit from the keyboard?
View 4 Replies View RelatedHow do I enter at text sentence on the face of a picture?
View 2 Replies View RelatedI am using PER 6 on OS 10.9.1. When I type to enter text on a photo the picture turns a reddish color and no text appears. What am I doing wrong?
View 1 Replies View RelatedI'm using an HP Envy x2, which is a tablet-laptop hybrid with an attachable keyboard, and I'm having an issue with Adobe Photoshop Elements 11.
When I attempt to start a new line of text in a text layer by pressing "Enter," it doesn't let me start a new line of text; instead, it stops editing the text layer altogether. I would like to be able to press "Enter" and have PSE11 start a new line of text in the text layer; I have been using Elements to create graphics since 2007 and have never encountered this problem.
I have already tried:
- Uninstalling and re-installing PSE11
- Ctrl + Enter, Shift + Enter, Fn + Enter
- Resetting the type tool
- Making sure the spacing is set to Auto
- Turning on and off the Num Lock key via on-screen keyboard
I am new to developing for AutoCAD. I am using VB.NET to create a table, as standard the first row of the table is a Title row, I want to change this to a data row. How to do this?
View 5 Replies View RelatedHow to alter AutoCADs' default plotter so that when I "publish" it will be the plotter that I use here most commonly in the office and I can use the default name given so I do not have to do a "page setup" every time I want to plot more than one page. I would like to select the pages that I am interested in publishing and go.
(also, I am using AutoCAD 2013 LT so LISP's are not a possibility)
Is there a way to turn off this wonderful feature? I am sick of having to create new LODs in order to supress a component or being unable to alter a subassembly because a different LOD of something is being altered somewhere.
View 6 Replies View RelatedI am trying to alter the properties of a mapping layer file I have created so that both the block and the text value are oriented horizontal on my sheet no matter where north is pointed.
View 2 Replies View RelatedCurrently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
How to make Quantity to be represented less precise in the balloon.
I mean to make less zeros after the dot. The upper balloon row is Quantity.
I have created a multi-value parameter in a part and exported it. I then linked it in the assembly but I am unable to edit it. I tried using iLogic but it also does not alter the part. Please see the attached 3 jpegs.
View 9 Replies View RelatedI am a little new to assigning attributes. My company had a block with two attributes that I need to alter. When the block is inserted, it asks a quantity. The other attribute is titled location. I am told if needed, all these quantities can be totaled per drawing. It has a title of "location". Two things: How to replicate this action? And is there a way to show all properties of a field for an attribute?
View 2 Replies View RelatedI have a CAD drawing that I have exported as an EPS in order to import it in to photoshop. I want to make the EPS look as though its a hand drawn illustration rather than a CAD drawing. I have tried the usual filters and can't get the desired look.
Can anyone suggest how I might achieve this?
ok so i have this gif file i found on the web
its about a minute long animation with words and pictures. how can i edit the words on it?
