I have a drawing created where the lineweights for each object have not been associated by layer. I would like them to be so. Is there an easy way to capture all of the objects on a given layer and associate all their lineweights by layer?
View 3 Replies
I have several .dwg files that I use as templates. I run find and replace VBA routines on the template .dwg files, ie find $Flavor$ and replace it with "Grape", and then I save the .dwg to another directory with a new name.
These VBA routines work well for acdbText and acdbMText objects, but I have a bunch of AcdbAttributeDefinition objects in the .dwg templates as well.
After much research about the AutoCAD object model (I'm mostly a Microsoft Access VBA programmer), I have come to understand that these AcdbAttributeDefinition objects are actually "remnants" of a block that no longer exists in the drawing.
Anyway, I'd like to convert all of these orphaned AcdbAttributeDefinition objects to acdbText objects in the templates and then delete the AcdbAttributeDefinition objects. I have some code that does just that.
However, the issue that I am having with the code is that the newly created acdbText objects are not on the same layer that the original AcdbAttributeDefinition objects were on. I don't know the syntax to identify what layer the AcdbAttributeDefinition object is on or how to specify what layer on which the acdbText object is created.
how to keep the acdbText objects on the same layers as the original AcdbAttributeDefinition objects during the conversion and deletion process?
Here is the code I am using currently:
Sub AttConvert(dwg as string)Dim oDocument as AcadDocumentDim ent as AcadEntityDim aa as objectset oDocument = Documents.open(dwg) For Each ent In oDocument.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then' DO SOMETHING TO IDENTIFY WHAT LAYER THE ACDBATTRIBUTEDEFINITION OBJECT IS ON
' DO SOMETHING TO SPECIFY THAT THAT IS THE LAYER TO CREATE THE ACDBTEXT OBJECT ON Set aa = ThisDrawing.ModelSpace.AddText(ent.TagString, ent.InsertionPoint, ent.Height) End If Next ent For Each ent In ThisDrawing.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then ent.Delete End If Next ent End Sub
I have a bunch of objects on a particular layer, and they're all different colors and linetypes and lineweights, and i want them to all take on the color / linetype / lineweight that i chose for that layer.. how do i do this?
View 1 Replies View RelatedSay I have 2 items, one is on layer "M-Duct" and the other on "M-Pipe" (they are in the same drawing). Any lisp routine that would create the layers "M-Duct-New" and "M-Pipe-New" (based on the same color and LT as the original layers) and then move those objects to the newly created layers?
View 9 Replies View RelatedI'd like to have/write a lisp to change all objects on layer "0" to layer "PC - Module"
If possible also;
save the document close the document open next in directory run layer changer program again.
I am using ACAD 2005 and am trying to copy&paste several objects from a layer I created in one .dxf file to one of the 2 standard layers (0 or Defpoints) in a new blank .dxf file.
My problem though is that if I copy and paste all of the objects (or even one of them) and them move to the new file and paste, it pastes the objects, but also "imports" into the new file the original file's layer that these objects were on.
For clarity, the new file only has the 2 standard layers and then after copy/pasting an object, the file manager shows the 3rd layer from the original file.
I wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.
View 4 Replies View RelatedHD Capture with Sony HVR-M25U Deck no preview or ability to capture?
View 1 Replies View RelatedAll the items are on one layer and i need to seperate them, i had to xref the drawing but i opened the original to double check and even there the objects are all on the same layer.
View 9 Replies View RelatedI have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
Currently, when I'm converting architectural drawings into backgrounds for my use, one of the first things I do is select certain objects based on their layer and delete them en mass.
I'm using the QSelect dialog box at the moment, but that's really difficult. I would try writing a LISP or something, but I don't know of a command line version of the QS command to make it work.
Is there a way that I can select one object, and make it select all the other objects in the drawing that are on the same layer? The QS command is handy, but very tedious.
I am using Autocad 11. I am working on some 12 year old drawings for a railroad museum. They are a mess. They look like they were done be an old pencil guy. Lots of views all over the drawing space rather than using layers to his advantage.
I am watching all the tutorials that i can find. There are Blocks on wrong layers.
I want to move a group of lines (part of the stuff on one layer) onto a new layer that i have created. Is it as simple as cut and paste? How do I prevent them moving during the process?
I tried making their layer current, then selecting the items, then cutting the items. Then i made the new layer that I wanted them on Current, then pasted them. I has to very carefully line them back up, and they are still on the original layer.
Some questions of layers:
-here can I see visually which objects are deposited in the layers like in illustrator, see screenshot,
-is nesting of layers allowed
-what is the easiest way to swap objects from layer to layer
-how can I select all objects from one certain layer?
illustrator_layers.jpg
I have a drawing with objects on multiple layers, however when I select an object, they all show as whtever layer is showing. If I open the drawing on antoher machine, everything works properly with multiple layers.
View 2 Replies View RelatedI am trying to assign objects (only in UNLOCKED layers) with a new layer.So basically, the user will select all the objects in the drawing.
After selecting (ex. press enter after window selecting), only objects in UNLOCKED layers will have a new layer.
Following is the code I am using...But I keep getting eOnLockedLayer exception.How should I handle this issue?
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
PromptSelectionOptions pSelOpts = new PromptSelectionOptions();
pSelOpts.MessageForAdding = "Select all objects";
PromptSelectionResult pSelRes = acDoc.Editor.GetSelection(pSelOpts);
if (pSelRes.Status == PromptStatus.OK)
[code]....
Are Layer Keys only for ACA objects ?
for example:
I'd like my dimensions to be all on layer "D" in the color red.
I added "dimlinear" to the key style. but it just draws dimensions on the current layer.
I want to copy some objects from one drawing to another. However, in the source drawing the objects are on one layer, but I want them on another layer in the target drawing. I know pasting the objects as a block fixes the problem, but as soon as I explode them they're back on their original layer - and I have to select them all and move them to the preferred layer - which can be tedious with multiple objects.
View 9 Replies View RelatedI have a plan view of a residential building. I want to remove some columns. I may need them later so I don't want to delete them.
I want to move them to a new layer (layer name: hiddenObject) and turn this layer off to unshow them.
When I move them and turn that layer off, first, the color of those objects didn't turn to layer's color and second they don't disappear.
What is wrong with my procedure?
I'm working with AutoCAD Architecture 2011 and working in the xref. I have my layer states set up, no problem. However, I have a layer that still shows up in all states even tho it is not saved in the layer states. If i click on it, it shows as off. It is a block, I have it on the ByLayer and the correct layer.
View 1 Replies View RelatedIf I don't want to VP Freeze everything on that layer, is there a way to individually VP Freeze certain objects on one layer? (without having to make new layers?)
The sitch: Making a ceiling plan, some dims are needed in all the other plans, but some are not needed in the ceiling plan. How can I simply turn "off" in the VP the few separate Dims I don't need? And that they can still turn up like normal in all the other VPs?
How can I get the layer that an entity is on. I have tried numerous method but they don't seen to be retrieving the layer information.
View 8 Replies View RelatedI am wanting to hide certain objects on a layer in a layout so they dont show up when i print it out. Is there a way to do this? But I still want the objects to show up in other layouts all the time.
View 4 Replies View Relatedi have created viewports on the defpoints layer in paper space, but now i can't select them to modify. Is there a switch or variable that allows depoints objects to be selected?
View 5 Replies View RelatedI remember reading a while ago about being able to select the layer you want and have everything on that layer brought to the front for ease of editing, however i can't remember the command name.
View 9 Replies View Relatedi am using Acad 2005 for two years. since now i started to use acad 2010. i did find the difference in layer isolation in 2005 if you do layer isolation, only the particular layer visible. then can be select all of them in one window. without disturbing other layers. but in 2010 while i isolate a layer, other layers also visible in the backround. when i select the isolated layer in one window, also the backround layers also getting selected.
i am facing problem in selecting the isolated layer all objects in one window.how to do selection or how to work on that?
I am working on a .dwg file in AutoCAD 2013 , and on one specific layer (defpoints), I am not able to select any of the objects. Initially, I thought that the layer may have been locked or frozen, but it is not. Additionally, I went ahead and locked then unlocked the layer as well as froze then thawed the layer, still not able to select any objects on the layer.
My next attempt to fix the problem was to run the command "AUDIT", and instructed to "Yes" fix any errors detected. The command seemed to execute correctly, however, it did not do anything. The objects on the layer still cannot be selected.
I need a LISP that create a new layer and ask me for the name and the other properties (color,lw,lt..).
ask me if I want move the selected object for the new layer (yes is the default value)
Walls are being created on layer A-Wall, in color Cyan, Lineweight .020, etc. I'd like to edit those layer properties. There must be a matrix somewhere that shows a list of all of the Architectural Objects, the layer that each object will be created on, and the properties of those layers. Where in ACA2008 have they hidden this top-secret matrix? I've accessed Layer Key Styles via about 6 different routes, and nowhere do I find a list of Objects. I see that I could define an override for every component of a Wall object in the Style Manager / Display Properties, but it sure would be easier to just change the layer color once, wherever that's defined. There is only one Layer Key Style accessible through Style Manager, and layer A-Wall doesn't appear in that manager- layers A-Wall-Abov, A-Wall-Blow, etc appear, but not A-Wall. Neither does layer A-Glaz, which is where Window objects are placed.
How does a Wall object know to place itself on layer A-Wall, and where are the properties of layer A-Wall defined?
Can you freeze text objects on the same layer in one viewport but have it still appear on the other viewport without having two separate layers.
View 3 Replies View RelatedI am using the command Draw Order and would like to use the Quick Select so that I can select all objects on a specific layer. How do I use the Quick Select in conjuction with the Draw Order command?
View 8 Replies View RelatedI find that the command to move objects to a different layers runs very slow in one of the drawing. I want to find out what wrong with the drawing and how to speed things up.
I have a LISP program that batch processes a large number of drawings. One of the step to process each drawing is to change the colors of some objects according to the status of the objects. I do this by moving the objects to a later that has the right color. So far the program only takes 2 to 4 minutes to process each drawing. But the program takes close to 90 minutes to process one specific drawing. I track down the problem has to do with the command that moves the objects to the right layer, like this:
(vl-cmdf "_.chprop" (ssget) "" "_layer" "ABC-Prod-Good-Pcs" "")
This command takes a very long time to finish, like 40 minutes each time it runs (to move 1200+ objects), and the program needs to run it twice for a total of approximately 80 minutes.
Please note that the drawing itself is not the largest drawing, and it doesn't have the largest number of objects to be moved either. It is close to the top-5 drawings in term of drawing size and the number of objects to be moved. I cannot say that the drawing size or the number of objects to be moved are the cause of the problem.
I tried to "speed up" by moving 200 objects incrementally. That didn't work. I tried to "speed up" by moving 100 objects incrementally and saving the drawing after each 100 objects are moved. That didn't work either; actually the speed is slightly slower than simply moving 1200+ objects all at once.
I don't know what to do. I believe there may be something unusual about that drawing. By the way, the reason why I choose to change color by moving objects to a different layer has to do with the fact that I have found this is the best way so far. I tried to change the color of the objects directly. But I find that the color of some sub-parts of the objects are not changed (because their color is by-layer). That's why I choose to change color by moving objects to a different layer.
How I can check the drawing, any different way to change color that is better.
