I have tried many of the sort of solutions I can find in threads here but none seem to do what I want.
ie facetres = 10, viewres = 20000, isolines = 2047 etc.
Below is a PDF'ed image of the problem very unsmooth.jpg
As you can see the pipe end is very jagged, just the viewport of the pipe comes out acceptable see below Smoother.jpg.
I am using 2012 Architecture and when plotting layouts it is converting curved surfaces into liniar hatched messes, my office just converted to 2012 from 2006.
i am using legacy hidden with monochrome.
When I create a pdf of a shaded 3D object the pdf shows up with pixelated edges. Is there a way to create a pdf of a shaded 3D object with smooth edges as it appears on screen?
View 4 Replies View RelatedI have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies View RelatedI have an OLE object in my drawing (a screen shot of a map) There is line work in the drawing as well. When I send it to the plotter it comes out looking great, exactly as shown on my screen. However, when I plot to PDF the OLE objects don't show up but the linework and hatching do.
View 9 Replies View RelatedSo I'm doing an installation drawing for a piece of equipment and I'm having an issue. Let's say I model a cube, put it in a viewport at a isometric view in "hidden" visual style. Several of the edges are plotting significantly darker than other edges on the cube.
View 1 Replies View RelatedWe have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedI am having problems plotting out parcels and creating label settings. I think I am missing an important concept in the object and display tab of setting creation. I am not finding going through the documentation. What I have found is not well explained.
I started with the OOB alignment settings. I noted that the Basic setting has a description that states the object will take on the settings of the layer it is created on.
I noted that if I adjusted the alignment properities to "Basic". I could then move the 'roadway' alignments to P-RD-CL and the swale alignments to P-SWALE-CL. Freezing the P-SWALE-CL then turns off the swale CL's, but keeps the roadway ones on.
I am looking for a fast way to determine which styles this works for or the area of the documentation that better explains how this works.
I am starting to explore creating label styles the same way. That way I can double or triple label pipe networks such that identical styles are labeled on an E&S layer and a PCSM layer and the individual lables can be dragged on the two different sheet layouts in the same file to avoid text over writes.
We are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
How can I align edges so the object looks smooth?
View 4 Replies View RelatedWe are facing the problem of some object/line missing while ploting/PDF for the Autocad 3d drawing.
We also tried for "HIDEPRECISION=1" command , even then not displaying it.
Then we use "OBSCUREDLTYPE=1" then the missing object display but other all lines get too dark in the same drawing .
For sample , I have attached one pdf , in which you can see the missing line and object marked with bluecolor box.
any other solution to display the missing object.
We are using :
Software : Autocad 2012-64Bit , NAviswork 2013 , Autoplant Piping V8i - SS4 version : 8.11.9.140 , MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies View RelatedI'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
I'm drawing a topo and trying to figure out a way to manually smooth out my contours. I'm not talking about the little jagged edges that you can remove if you use the smooth surface option under surface properties but the big ugly looking jumps you see when contouring a relatively flat lot. In the ancient version of AutoCAD my company used the contours came in almost like splines and you could move the vertices around to make them look good. I know you can go in and delete some TIN lines and edit point elevations but that is very time consuming and I'm hoping there is a quicker way.
I know I can extract them into polylines but there are too many little segments to be useful. I've seen the SIMPLIFY SURFACE option and while that takes away some of the roughness it creates some as well. Is there some better option than extracting and then drawing a spline between the parts I want to smooth out? These contours don't need to be 100% accurate, I just need them to look simple, like if someone was drawing them by hand.
Is there a way to remove the 'parting' line to create a smooth surface?
Inventor 2013, SP2
Dell Precision M6600
Windows 7 Professional - 64Bit
32 GB Ram
Nvidia Quadro 3000M
Just converted to mac and have installed autocad 2013. I am quite shocked to find no option for 'smooth display' or anti aliasing for 2D drafting.Am I missing an option, I am very new to mac!
View 9 Replies View RelatedI have a rectangle to which I need to apply a gradient fill - from red to white (paper color).
While this is easy enough, I'm not really happy with the result. I expect the transition from the gradient to the actual paper color to be nearly invisible, but instead I can quite clearly see where the rectangle ends and the actual white paper begins. how to make this transition more smooth?
i have a problem when rendering 3d objects having arcs. the arc in the rendered photo is not smooth and round !
View 5 Replies View RelatedHow to get a 3D solid in to Keyshot 3 that is smooth! Ie no obvious facet edges. I have tried everything to my knowledge, FACETRES = 10 etc but every time i open up the model in keyshot it is faceted!
View 2 Replies View RelatedI need to do a smooth transtition between that first long cube and the cylinder kind of shpe on it's right so that the cube and cylinder are attached toether and we dont see the edges of the cube.
View 9 Replies View RelatedSome of the files texts are displaying without smooth edge.
View 9 Replies View RelatedBeen chatting with an architect in my office, and he was asking me if we could make our TIN surfaces smooth. I cannot find a way, would it take a 3rd party program? He wants it like the image i attached. How to achieve this with a TIN surface?
View 9 Replies View Relatedis there is an way to create a mesh if available 2 3dpoline or need lisp
View 5 Replies View RelatedSee the two pipes connecting at the end on the right side see screen shot 3. How do i make so they look like that in screen shot 3
attachemnt one is the drawing atachment two is the problem that im asking
attackment three is the solution i just don't know how to make it in the actual drawing
how to make nice smooth looking menu/ribbon icons like the ones that come with AutoCAD? Mine all look pretty lame.
I am using Paint and a 16x16 bit canvas.
Is there a special graphics program that simplifies icon creation?
How to mold a pipe and flange together wit a filled in transiton as if they were one continuous piece.
The pipe edge is flush with the flat square fange. The combine option does not allow me to conduct operation.
I am struggling to create a smooth transition between radii called out on a drawing. I am also unsure of how to create a flange on that edge of my part.
Here is the drawing and the model I have created so far.
while tracing a plan on Autocad 2010, by accident I clicked on something, or performed some unknown commands. My lines, that were smooth just seconds before, suddenly became really pixelated, as if made of many small segments. And when rendering the plan on pdf, it is still the same, and the lines are really thick. I have checked, the line thickness is on default (0.25mm), but compared to renderings I've done before, this time the drawing has really awful lines.
View 3 Replies View RelatedTrying to print out a large arc on paper using fill to thicken it but as the attached picture shows, the filled part turns out blocky, leaving noticeable gaps. Basically, it's not smooth and needs to be more rounded. Is there anyway to fix this?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
My issue is that all my rounded objects aren´t rendering smooth. And what is up with all these lines?
Am i missing something when i render rounded objects? I already tried the this tip but nothing changed.