AutoCad 3D :: Create Smooth Mesh Through 3DPolyline
Apr 11, 2013is there is an way to create a mesh if available 2 3dpoline or need lisp
View 5 Replies
ADVERTISEMENT
AutoCad 3D :: Closed 3DPolyline To Mesh / 3DFace
Dec 2, 2011Problem: I have closed 3dpolyline which I need to convert to either mesh (then explode to 3dface) or if possible straight to 3dface.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Avoiding Mesh Smooth Dialog
Dec 12, 2012When using mesh smooth from AutoLisp, is there a way to avoid the dialog that comes up when the object is a non primitive 3d solid?
View 8 Replies View Related3ds Max :: Spline To Quadified Smooth Mesh
Jan 13, 2012I am creating a 3D editable mesh county map of the state of Illinois using coordinates from a SHP file that I extracted using a Python script. The attached maxscript code draws the knots for spline, closes it, converts it to an editable poly, extrudes the first face to a predefined height, caps the holes, converts it to an editable mesh, quadifies the mesh, and then finally smooths the mesh for each county. This script works great for about 90% of the counties, but every time I run it the same 8 or 9 counties are not visible. I can highlight the invisible counties, but I do not have the option to convert them to an editable polygon. When I just draw the splines (without any of the converting, etc.), I see all the counties in 2D, but I can only manually convert some of the counties to an editable polygon.
I thought this problem came from the fact that some of the edges were bound to be touching, so I tried to create a small buffer (0.005" or so) between the counties, but the problem persisted.
Also, since the attachment option sometimes does not work for me, I am including the public Dropbox links for the two attached files:
Script - [URL].......
CSV File - [URL]........
Illustrator :: Smooth Curves With Gradient Mesh?
Oct 13, 2013For a school project I was to render an everyday object and I chose a pepper. I created the pepper with the mesh tool and also rendered it with the gradient mesh, now my instructor says that I need to have really smooth curves but I have way too many anchor points so I don't know how to fix the curves.
View 4 Replies View RelatedMaya Animation :: How To Smooth Bind A Mesh To Skeleton
Nov 18, 2011How can I smooth bind a mesh to the skeleton and have everything start out at 0. (so basically nothing gets moved by the skeleton.) So that I can add the weight wherever I want manually.
View 3 Replies View RelatedMaya Modeling :: Mesh Is Not Showing 3 Smooth In Viewport
Nov 8, 2011When i'm working in maya 2011, my mesh is not showing the 3 smooth in the viewport. What's the reason behind.
View 1 Replies View RelatedMaya Animation :: Mesh Acts Different While Posing The Rig After Smooth?
Sep 12, 2013I have a problem after I done my own rigg from scratch. This is what happening:
The rest of the mesh follows the rotation. What is wrong?
3ds Max Modeling :: Way To Change Mesh Smooth Iterations Based On Camera Distance
Mar 31, 2012is there a way to change mesh smooth iterations based on camera distance?(e.g. far objects to have iteration 1, and close objects to have 10)
View 3 Replies View RelatedAutoCAD Inventor :: How To Create A Smooth Transition Between Radii
Nov 13, 2012I am struggling to create a smooth transition between radii called out on a drawing. I am also unsure of how to create a flange on that edge of my part.
Here is the drawing and the model I have created so far.
AutoCAD Inventor :: Create Mesh From Solid
Oct 17, 2012I try to migrate our ObjectArx Api to Inventor. Therefore I need a function to create a mesh from a solid.
With Autocad .Net Api, I can use GetObjectMesh(DbObject obj, MeshFaceterData parameter). Does in the Inventor Api a similar function exist?
In the parameters I need to set the deviation in the same way as in the Autocad .Net Api.
Example:
FaceterDevNormal = 0.1;
FaceterDevSurface = 0.1;
FaceterMeshType = 2;
AutoCAD 2010 :: Create Mesh Between Arc And Point?
Jan 24, 2012How do you create a mesh between an arc and a point, or vertex between 2 lines.
View 8 Replies View RelatedAutoCad 3D :: Extend A Mesh Onto Another To Create A Solid
Aug 29, 2013Using AutoCAD 2014 I'm trying to model the tummy cut on the back of a guitar similar to this:
2013-06-03_15-46-23_140_zps0a2815e5.jpg
I've modeled it to my liking using a mesh surface, how can I "subtract" this area from my 3d solid body? I also have Fusion360, but don't really know how to use it.
AutoCAD 2010 :: Sweeping Along A Complex 3DPolyline
Apr 16, 2013I am modeling an ASME pressure vessel with a 2:1 semi elliptical head upon which there must be a couple of lines of .375" trace tubing. I created a 3dpolyine that is the center line of this tubing, and joined all the segments into one so as to be able to sweep the whole thing and make one solid of the tubing run, but it simply will not sweep. I get a message this it is "unable to sweep the selected object." If I break the 3dpolyline, I can sweep parts of it, but the more complex the line segment, I again get the error message. I have attached a copy of the tubing centerlines.
The one on the left is the joined 3dpolyline, the one on the right is the 3dpolylines unjoined. (These were achieved using an intersection command of a rotated surface--the head profile--and an extruded surface--the tube tracing plan layout.) I have done this before, but only with the unjoined 3dpolyline, as in the right-hand example, but that is very time consuming as each segment must be swept. But I recently acquired a third-party LISP routine that joins the 3dpolylines into one. I'm thinking there must be a limitation on data of the 3dpolyline preventing the sweep, and wondering if there is a setting or system variable that will allow the more complex 3dpolyline to be swept.
AutoCAD Inventor :: Create Mesh Inside Cylinder
Apr 6, 2012I'm having difficulty trying to create what could be described as a diamond pattern inside a cylinder. How to achieve this.
Please see picture for an idea of the pattern.
AutoCad 3D :: How To Create Mesh Or Surface From Contour Lines
Jun 25, 2011I'd like to be able to create a surface or mesh from contour lines to give a better 3D representation of terrain than just contour lines. "Drape" seems to be the tool ACA, but I'm wondering if AutoCAD can do something similar. LOFT sorta works, but even then, I have to do it in sections, and I'm not really looking for a solid.
View 7 Replies View RelatedAutoCAD Civil 3D :: Create A Smooth Surface That Doesn't Connect To Anything Overlapping It?
Mar 22, 2012I'm creating a 3d ramp and need to create one surface of the whole thing, but as its overlapping on certain areas the surface keeps attaching itself to the corridor below it and another corridor crossing over top.
how to create a smooth surface that doesnt connect to anything overlapping it?
AutoCAD Map 3D :: Trim Or Break 3DPolyline At Specific Z Coord
Jul 2, 2013Say we have a line that goes from 0,0,0 to 10,0,10.
How can i trim or break that line (or snap another line to it) at a specific z coord? say at elev 5.51?
AutoCAD 2010 :: Create Flat Polygon Mesh By Typing 3D?
Nov 17, 2011In previous versions I could create a flat polygon mesh by typing "3D" and have an option to create a planar mesh "M" X "N" by specifying the 4 corners along with M and N. I don't see a way to draw this mesh in 2012 without having to ID every vertices. This procedure is listed in the Legacy portion of Help, but I do not see a way to do it.
View 5 Replies View RelatedAutoCAD .NET :: Rotating 3DPolyline To Check Z-value Of Vertices In Top-view Mode
Apr 7, 2013I am trying to rotate a 3dPolyline, so that I can check(view) the Z-value of vertices in the top-view mode.
The following is the example which I am trying to achieve.
The white 3dPolyline has vertices at each intersecting point with the contour lines. Each vertax has Z-value.
I want to rotate this white 3dPolyline in 3D, so that I can make the red 2dPolyline. (Z-value becomes Y-value)
And the start point of the white 3dPolyline becomes the left most point of the red line.
The end point of the white 3dPolyline becomes the right most point of the red line.
Currently, I am doing this by making a new 2dPolyline, manually inserting Z-values as Y-values.
But it looks like my code can be neater if I use TrnasformBy(Matrix3d.Projection).
I am not good with Geometry, so how to use this Matrix3d.Projection.
Need a quick code snippet to make this function? (preferably in C#)
AutoCAD Civil 3D :: River Bottom Surface From 3DPolyline Sections
Sep 4, 2012Is there an easy way to create a tin surface from 3d polylines that are generated by actual measurements of a river/ditch or imported from Hec-Ras (River Analysis -extension)?
The problem seems to be that the triangles should be long and narrow (like the ditch bottom in the example) instead of normal triangles the triangulation method normally generates. (The triangles in the example are generated by 3dwin -program).
When using Hec-Ras one way to go around this problem is to interpolate sections (XS:s) with very short distance. Hec-Ras does the interpolation very well, but I would like to have a better solution without tricks with other programs. Also in the long rivers the result is a very large file.
AutoCad 2D :: Reduce Number Of Vertex Points In Polyline Or 3DPolyline?
Oct 9, 2013Any way to reduce the number of vertex points in a polyline or 3d polyline and retain the basic shape but without having to redraw over the top it?
Ideally, I would like any adjacent segments which are in the same direction as each other to become one segment.
In my image you can see the number of points it has, the majority of which are not necessary for my needs (it was imported from a client's drawing). My desired linetype will also not show because of this.
spline.jpg
Photoshop :: Trying To Create Smooth Edges
May 27, 2009Trying to create smooth edges. I have been working on my own logo. I have C4 Photoshop (Web Prem). I have been creating circles on a transparent background. When I applied logo on one of my images I notice little white doted edges. I see little white dots. What is the best way to create clean edge on transparency backgrounds?
View 2 Replies View RelatedIllustrator :: How To Create A Smooth Line
Mar 21, 2013having an issue lining up letters to create a smooth line.
Using Myriad Pro text. The letters in question are 'n' and 'h' - both lowercase. Also working in CS6.
Hopefully these pictures will explain the issue:
When viewed actual size (100x)
When viewed zoomed (400x)
So my question is: is there a way to align them perfectly? or a is this known to be impossible in illustrator? Is there a workaround?
AutoCAD Inventor :: True Purpose Of Create Curved Mesh Element In 2012 Simulation
May 30, 2012Below is my test procedure for "Create Curve Mesh Element" by Inventor simulation 2012.
1. I made a box 100(W)X100(D)X20(H) with 2xR20 (mm) fillets at the opposite edges.
2. I copied a box I made for making 2 type mesh.
3. I made mesh on the box without "Create Curved Mesh Elements" option.
Node number: 2374
Element number: 1365
4. I made mesh another model with "Create Curved Mesh Elements" option.
Node number: 2374 (same number, not increase)
Element number: 1365
Mesh shape is different(please refere attachiment jpeg file).
I think that "Create Curved Mesh Element option" is not for making second tetrahedron elements.But I cnanot the true porpose of "Create Curved Mesh Elements" option.For only P method, not H method?
Photoshop :: How To Create Smooth Curved Shapes
Mar 31, 2007I always face problem with using pen tool to create smooth curves... specially when I give grediant to the shape or the background colour is some dark colour the crude edges of the shape are clearly visible..
can anyone give me a tip how to create smooth curved shapes with photoshop?
Photoshop :: How To Create Shapes With Smooth Edges?
Jul 24, 2009I am trying to create shapes in photoshop but they all seem to have rough edges. Is there a way around this? 1. I have been using the "rectangular marquee tool" to draw a square. 2. Filling it in with a color 3. Then to Edit > Transform > Skew. Then I pull in show corners, push some out. Now the edges look horrible.
View 5 Replies View RelatedAutoCAD Inventor :: Matching Mesh Of Hole / Mesh Of Round Bar
Apr 9, 2012I have an assembly that has somewhere a hole with a round bar that exactly fits in this hole. But when meshing the assembly, the mesh of the hole and the mesh of the bar are different.
The result is that the different parts do only seem to touch each other at the edges of the mesh, resulting in high stresses.
See picture.
I tried to made a derived part from the assembly, but that one does not finish meshing. After 48 hours, the progress bar is still half way. While the one above did finish in about 15 minutes. What can I do to make the meshes match?
Photoshop :: How To Create A Web Optimized Jpg With A Well Preserved Smooth Gradient
Sep 19, 2002how to accomplish creating a web optimized graphic with a smooth gradient using PS7.
it seems that you will not be able to generate such a graphic using the default settings in photoshop.
I am right now using the maximum number of colors allowable in the 'save for web' optimization tool (which is 256 for both jpg and gif apparently) I know JPGs are the file type for the job generally speaking, but without optimization the JPG is too large to use for a web page header.
GIMP :: Create Vignette On Image - Smooth Transition
Feb 12, 2013I am trying to create a vignette on an image and find that when I use a brush with a fuzzy edge the result is not what I'm looking for. There are these circles that are left behind where there should be a smooth transition. (See Attachment)
View 8 Replies View RelatedCorelDRAW X6 :: Create Symmetrical Grid In Mesh
Dec 11, 2012Is it possible to create a symmetrical grid in a mesh? without having to manually do each node and intersection? A simple square with just a small shape change to a corner causes non-symmetrical patterns in the entire mesh.
How is the mesh in CD different from AI? Of course there is a lot more online content for AI.