How to set cute pdf to always auto print in same directory as source file. Also use source file name except with .pdf extension. I would like to add a macro to my save button so it does this automatically and never have to convert again. This would also be useful for dwf format also. Disk drives are massive now so no need to save space.
View 3 Replieswhen I try to print I get this message "There is one photo in this print job which is missing its source file" I've tried many photos, same message. I've already tried to reinstall (and update to 5.3) Lightroom.
View 4 Replies View RelatedIs there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedIs it possible in Lightroom to automatically append/prepend directory names in the file path into the file name itself? Example:
DirectoryA Sub-directoryB filename.jpg (original file name)
==>
DirectoryA Sub-directoryB DirectoryA_Sub-directoryB_filename.jpg (concatenated new file name)
If this is not natively possible within Lightroom, any plug-in that delivers this functionality?
I am trying to use this code to take the flat pattern and save it to a specified directory ("X:Burn Files" ) but I can't get the path to work. I can save the file just fine but not where I would like it to go.
Public Sub WriteSheetMetalDWG()
' Get the active document. This assumes it is a part document.
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oCompDef As SheetMetalComponentDefinition
[code]...
Having trouble plotting a dwg file when it is deeper than 5 folders in a directory. I was given instructions a few years ago on how to correct this, but unfortunately lost/forgot them. We just upgraded to ACAD Mechanical 2012, and I need to modify this setting again...it was something simple, I just can't remember.
View 2 Replies View RelatedAutocad is saving files to the Temp folder. I like to keep that folder nice and clean. My question is: which file location in the options dialog box that controls that issue?
View 4 Replies View RelatedI'd like to start using the auto-publish feature in Autocad, however the options for the file location are pretty limited. I'd like to set it to something like the following:
../transmittals/current issue/
but the options I'm presented with is either an absolute location, or the drawing folder or subfolder.
Is there a sysvar or a registry setting I can tweak to make this behave to my liking?
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
I have a unique challenge. I use my personal laptop for my CAD work at work. We are now setup with Vault 2012 and Inventor 2012 and we are setup to pull our Templates, standard files and content center parts from the vault.
I have become so busy that I would like to do some of my work at home on evenings and weekends. Other than the obvious problems of having no life and working for nothing, I am having the problem of not being able to access templates or CC parts at home. I can store the CC and templates on my C drive but am not sure where to set Inventor to point to the files on my drive or if there is an easy to do so depending on where I am.
If I have a table or custom iPart and create an instance of it inside an assembly, is it possible to create an independent .ipt file which is not linked to its source file?
View 2 Replies View RelatedWhat exactly is this tool used for if you cant change the source file name or the path? and why would the interface let me poke into these fields and give me the option to find and replace if they cnnot be edited
So how can I change the Source File name and path?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
every time when I want to open a file, Illustrator keeps showing the same directory (for example HD Macintosh/workfolder).
Normally Illustrator would show the last directory I used. For that matter, Illustrator also does this when I want to save an Illustrator file. It's a bit annoying when I have several documents I want to save into the same directory or folder and I have to click to the right directory for every document I made, because normally Illustrator shows up the last directory I used.
I use Illustrator CS5.5 on an Imac running iOS 10.8.2.The second problem I have (with Illustrator as well as InDesign) is that after my iMac hasn't been used for a while and it goes to sleep, after waking up, both Illustrator and InDesign crashed. This problem doesn't occur every time, but every now and then.
I read what is in the picture in a skill builder, which is:
[URL]
When is a sketch that is copied to another part file linked to the source file?
I tried it, i copied part of a sketch, some lines, from one part file into a sketch in another part file and there was no link
Error 1308 Source File not found inventor professional 2013
View 1 Replies View RelatedI'm having a problem opening AutoCad Civil 3D 2010.
When I click the shortcut Windows starts configuration and then I get the following error message:
Error 1308.Source file not found;C:autodeskAutoCAD Civil 3D 2010
x86C3DProgram Files
ootCommon Files FolderAutodesk
sharedAdLM|R1en-UShelpBRWstylecommons.css.old.
Verify that the files exists and that you can access it. Needless to say AutoCad wont open all I get is Retry or Cancel, selecting.
Retry just gets the same error so when I Cancel I then get "Are you sure you want to Cancel" which I select and then I get the message Fatal Error during installation.
This is a downloaded install from Autodesk and I dont have discs available.
DWG TruView,Autodesk Vault 2010 and Autodesk Design all installed OK.
System detail's; OS is 64 bit Windows Home 7 Ver 6.1.7600 with IE8
CPU AMD Athlon 11 P320 Dual Core, 4 gig RAM,500GB HDD running on a new Toshiba Laptop.
I've looked around at various forum's without success.A couple of sites offer what they call a fix but it turns out to be registry scanners.
I'm trying to create a script to save a file that is already open in the same directory with a different name.
Example: nome_0000_art to nome_0000_closed
I tried to create from another script that saves EPS but as I am new to the subject could not make it work
how do I perform the command saveas automatically without showing the dialog window by changing the file name?
Due to circumstances beyond my control the directory path that my tool palettes are mapped to needs to be changed.
From: T:Toolpalettesetc...
To: X:Toolpalettesetc...
I have hundreds of blocks in the tool palettes that are looking for their source file on the "T" drive.
My brain says "Find / Replace T: with X: " using Notepad in all of the ATC files.
Is there a better method to tell those blocks to look on the "X" drive?
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 Replies View RelatedWe just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI placed a watermarked image for review and now need to buy the real stock image, but have accidentally deleted the source file. Is the file data stored anywhere in Photoshop like a Link would be in InDesign?
View 3 Replies View RelatedI'm trying to make a .gif file using a .wmv file as the source. It needs to be small, about 2 mb or less.
When I first finished the .gif (about 150 frames), the file was much too large. I resized it, used the "optimize" feature, and made it grayscale, but it's still too big.
Now I want to try cutting frames to make the file size smaller. How do I cut every other frame in my .gif?
Alternatively, is there any way to choose the number of frames I want in "extract videorange" (for ex: I want only 10 frames from mark 3:00 to 3:30)?
I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?
View 7 Replies View RelatedHave searched but i cant find a good way of retrieving the source path of the current .AI file. Is it possible?
IE: If i am working with a file in C:adobeIllustratoreautifulfile.ai i want a function that retrieve C:adobeIllustrator
// Clint
i cant get install it becasue this nagging erorr message
View 5 Replies View RelatedWhen I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies View RelatedI had copied a .PNG file into the source folder and wanted to import it into the Lightroom catalog.
However the import dialog does not show that file in the source folder at all.
I also tried the method of selecting the source folder and using the "Synchronize" option. But that did not show the .PNG file either.
My clumsy work-around was to open the file in CS6 and save it as a .JPG file.
So my question: how can I tell Lightroom which file types (extensions) I want to be able to import?
I have text in a frame with a table in it, connected to a Word file. Every time I try to copy text in it, InDesign goes into a loop while it refers back to the original file. It does it a bunch of times, I assume (but don't know) once for every row in the table. The loop takes three or four minutes to complete and there's nothing I can do until it's finished... I want to break that link and just have it as a normal text box, rather than a placed one. How do I do that?
View 3 Replies View RelatedI have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View Related