Im at Autocad 2012.
When I start drawing a line from a specific point in the drawing and type in the dimensions via DYN - relative coordinates work like a charm, but when I start a rectangle from the same point and type in the dimensions (via DYN) it wont work.
It does not change when I set dynpicoords to 0 or 1. Nothing else happens when I type @ or # or nothing as prefix.
I noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
I have a problem with absolute and relative coordinate regarding drawing an arc.
From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.
For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.
Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?
Having trouble recently with tracking,For example if i start the line tool, and track from a point, i am given absolute coordinates instead of relative coordinates from that initial point. Absolute coordinates are not much useful to me, I want to be able to start a line at a certain distance from another point.
View 1 Replies View RelatedI’m trying to export from my drawing point X-Y position coordinates to Excel for use in programming a metrology that will measure at these locations.
When I use the EATTEXT command to pull up the data extraction wizard, it will export the positions & extracts the locations to a spreadsheet format. But coordinate numbers I get, seem to be relative to the World USC system & not the origin I align & set in the center.
Yet when I use ID Point, to check positions the coordinates of the points are correct & relative to the center origin. How to get the location coordinates relative to the center USC origin I've located in the center of my part?
I'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.
Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.
What controls origon (x,y = 0,0) of a objects coordinates? I'm not refering to which the "Reference Point".I use a bunch of artboards and sometimes origon originates from the newest artboard i have created, which is great for my workflow. I place a lot of objects using the top coordination tool.
But often the origon fixes it's position to the first artboard. Is there a way to control the origon?Specs: Win7, 64bit, Illustrator CS6 16.0.3.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedThe coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
Let me start by saying I am not an AutoCAD wiz by any means. I have AutoCAD LT 2013 at my work and for the last year I have used it with no issues same as I have for the last 10 with previous versions.
This morning I came in and I cannot pan with my scroll wheel or double click the scroll wheel to zoom to extents. I have tried checking the settings for the wheel for pan and zoom and they are both at "1"
Whats even more frustrating is now all of a sudden I cannot enter dimensions for rectangles and other items with the small boxes that usually show up next to my item on the workspace (20" - "tab" - 12" - enter to get a 20x12 rectangle for example).
I have gone through every option section; I have tried rebooting my computer; I have looked at the settings for the mouse and nothing seems to do anything.
I'd like to not have to manually update every base/projected view to see what's included on an idw...
Using Inventor professional 2013. HP laptop with Win7 64-bit and Quadro card.
I have a drawing with so many rectangles in one layer. i want the sizes of those rectangles( ie L x B) is there any way to get the sizes of a rectangles from autocad and paste it into excel.
View 9 Replies View RelatedI want to loft two rectangles using arc as a path , but i cant , 1st i cant draw the arc in 3d so i draw it in "Front" view , then i cant loft the rectangles using that arc as an path -"The selected entities are not valid" , maybe because i draw the arc in "Front"(bottom left), but i cant draw it in 3d?!! Here it is some screen shot:
View 0 Replies View RelatedWhen I go to draw a box (rectangle or square) and I enter in exact dimensions or coordinates it is 1/16" off. I have checked my ortho (which is drawing straight) and my UCS. What else could it be? I am using Autocad 2014 and only drawing in 2D.
View 9 Replies View RelatedII have been creating rectangles using rec and because it is a polyline I get the "midpoint" nodes which I need to keep. I often have to modify these by increasing their length or shortening them, large numbers of them at times. Currently I have to select each "midpoint", of the rectangle, one at a time in order to change all of their lengths at one time.
1.jpg
6.jpg
I am trying to find a faster way to select the "midpoint" of several rectangles or some other way instead of the individual method that I have been using. I've tried trim, extend, and stretch. Maybe there is another that I am not considering.
Trim removes the bottom line completely and retains only 3 sides so this doesn't work.
4.jpg.
Extend does the same thing and stretch works very different than what I am trying to do.
This is my exercise:
6.jpg
7.jpg
8.jpg
As advanced as my AutoCAD skills are I don't know how to specify the dimensions of a rectangle or square yet. How to know the prompts I need to follow after typing the 'rec' command in?
View 6 Replies View RelatedI create a surface. Then add a point file. The Surface boundary shows up but I see no contours or triangles. If I 3drotate and esc from that command I can then see triangles.
I need to show contours, or better yet colors, to provide a good visual of the existing ground.
I am having a problem plotting any viewports that are not set to 2D wireframe. All viewports set to 2D wireframe plot correctly but anything set to hidden of conceptual plots as a black square.
View 1 Replies View RelatedI was unable to fully launch Autocad2010,2012 or 2013. It would almost deploy and then disappear from the screen.Autocad support yet unable to repair. Decided to uninstall and reinstall software. I now have software fully deploying but if you draw a square it views like a rectangle.
View 2 Replies View RelatedLet us say that i have some rectangles with different sizes is there any way to offset one time.
View 9 Replies View RelatedHow would I create a pyramid where the base and top are rectangles not squares?
View 6 Replies View RelatedI have 2 rectangles and i want to loft them by path.I want the path to be arc , but i cant draw the arc in isometric view. The objects are positioned something like thes 2 smiles. One is exactly above the other and i want to draw arc to connect them and then use loft but cant make the arc. I tried to draw the arc in Front view, but i then i couldnt use it as loft path.So how to make the arc in 3d?
View 9 Replies View RelatedIn AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.
So the drawing gets clear.
How can this be done in Inventor?
With the lines connected to the border?
I would like to find out how to fix two components in an assembly relative to each other, and using VBA.
What I want to do is to build the assembly (which consists of two components A and B, and also other components) and then animate the joint in component B. In order to do so, I have to fix A to B so that A moves along with the joint motion. But my problem here is that the attachment of A to B is not definite - it depends on other components in the assembly, so I cannot predefine a constrain between the two.
Is there a way I can easily fix two components relative to each other in an assembly without prior knowledge on how they are positioned relative to each other?
I'm thinking of measuring and then constraining the origins of the two part files in 6DOF, but I'm not sure how i can extract the angle between the axes and then constrain them in the correct way (mating using angles has always been confusing for me).
Whenever I use "attachimage" within a drawing, I specify relative path. I would assume that if I open the file on another computer, AutoCAD would be able to find the image as long as it is in the same folder as the DWG file. This is never the case. I always get an error message stating that the reference is missing and it asks if I want to update its location. What good is specifying a relative path then? I'm using AutoCAD 2010.
View 9 Replies View RelatedIs it possible to rotate an object to thecurrent UCS. I use UCS object quite a bit and want to align text to the mycurrent UCS without having to align it to an object. i.e. to select the text andsimply rotate it around the justify point to a set angle relative to the current view.
View 3 Replies View RelatedUsing the Roland GX-24 plotter to cut vinyl and the Illustrator print to plotter plug-in, the program refused to cut rectangles. (with the exception of lower case i's) This includes Capital I's, lower case l's, hyphens and rectangles using the rectangle tool.
All other letters have no issue cutting. So long as they're not a single rectangle. This anomaly was experienced using several files, tested on old and new. So its not an issue with the file.
I am trying to write a standard scrpit file for a data extraction using -EATTEXT. I plan for others to use this script file on different computers, so I will not be able to put in a full file path; it will need to remain relative. Unfortunately, AutoCAD will not recognize a relative file path entered into the command line for -EATTEXT.
View 2 Replies View RelatedI am using autocad 2011. I am trying to attach a drawing as a xreg with a relative path. It keeps giving me relative path can not be assigned. I have tried saving the dwg. I have even started a new drawing and tried again but it keeps giving me the same error. All my drawing are in the same folder on a network drive. Another employee can open the drawing file from his computer and attach the same file fine. when He does it I can see the relative path. Is there a setting that I am missing?
View 9 Replies View RelatedI'm trying to design a gear system wherein a small gear rotating on an axle interacts with a large gear, held on an arm. The arm rotates about the same axis as the small gear, in the opposite direction. I applied the relevant motion constraint between the two gears. When I rotate the arm, the motion of the large gear rotates the small gear. However, if I just rotate the small gear, it freewheels, and the large gear doesn't move at all. This is a problem, because the machine depends on the independent rotation of both gear and arm-- the small gear has an input applied to it, but if I try to rotate it it has no effect on the large gear. I assume this is to do with the fact that the large gear's axis of rotation moves with the rotation of the arm.
I can't just throw it all into dynamic simulation, because I don't know yet what kind of torques will be rotating the arm and the small gear-- I know how they rotate relative to each other in terms of degrees, but that's all.
Essentially what I need to do is make it so that rotating the small gear turns the big gear, even when the arm is free to move (when it's grounded, the gears turn normally). I thought about using a contact set, but the gears (generated by Inventor) actually slightly intersect at the teeth, so that doesn't work.