AutoCAD 2010 :: Rectangles With Different Sizes - Multiple Offset

Apr 3, 2010

Let us say that i have some rectangles with different sizes is there any way to offset one time.

View 9 Replies


ADVERTISEMENT

AutoCad :: Stretch Multiple Rectangles At The Same Time

Jan 1, 2014

II have been creating rectangles using rec and because it is a polyline I get the "midpoint" nodes which I need to keep. I often have to modify these by increasing their length or shortening them, large numbers of them at times. Currently I have to select each "midpoint", of the rectangle, one at a time in order to change all of their lengths at one time.

1.jpg
6.jpg

I am trying to find a faster way to select the "midpoint" of several rectangles or some other way instead of the individual method that I have been using. I've tried trim, extend, and stretch. Maybe there is another that I am not considering.

Trim removes the bottom line completely and retains only 3 sides so this doesn't work.
4.jpg.

Extend does the same thing and stretch works very different than what I am trying to do.

This is my exercise:
6.jpg
7.jpg
8.jpg

View 9 Replies View Related

AutoCAD Inventor :: Multiple Parts Use Lines / Rectangles To Separate Each Part

May 7, 2012

In AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.

So the drawing gets clear.

How can this be done in Inventor?

With the lines connected to the border?

View 1 Replies View Related

AutoCAD 2010 :: Viewports Plotting As Black Rectangles

Jul 21, 2012

I am having a problem plotting any viewports that are not set to 2D wireframe. All viewports set to 2D wireframe plot correctly but anything set to hidden of conceptual plots as a black square.

View 1 Replies View Related

AutoCAD 2010 :: Create Pyramid Where Base And Top Are Rectangles Not Squares?

Feb 17, 2012

How would I create a pyramid where the base and top are rectangles not squares?

View 6 Replies View Related

GIMP :: Combining Slices Of Multiple Rectangles

Sep 27, 2012

Using guides, I can create slices of multiple rectangles intersecting each other. For a web, I may have one picture on the top and multiple items below. If I use guides, the top picture gets cut into multiple pieces. Is there a way to merge them back into one piece? I probably can create a new guide on with only the top, but it's an extra step and the HTMLs from 2 attempts are not compatible with each other.

View 3 Replies View Related

AutoCad :: Multiple Offset Command?

Oct 3, 2006

Is there a multiple offset commnad?

I'm using AutoCA 2007 (Full).

If not maybe some LSP routine?

View 9 Replies View Related

AutoCAD Civil 3D :: How To Load Multiple Text Sizes

Oct 26, 2011

I am trying to load multiple Text Sizes into AutoCAD Civil 3D 2012 so that I can have a list of the standard text sizes (3/32", 3/16", 1/4", 3/8") to choose from the Annotation tab > Text Group > Annotation Text Height drop down list, instead of having to type them in each time.

At first I thought that I could just add the different text sizes using the TEXTSIZE variable command into my drawing template file, but apparently the Text Sizes entered are only retained for that particular session of AutoCAD Civil 3D.  Is there perhaps some other system variable that controls this setting being retained for more than one session??

Then I thought I could just create a program to load the sizes. I originally tried creating a C# .NET program to load the text sizes, but ran into a problem.  I then I tried creating another version of a C# program, as well as an AutoLISP script, thinking that it was perhaps some limitation to my approach (which still may be the case).  But I still keep running into the same problem.  The problem is that only the last text size specified is actually entered into the list of available text sizes.  The other text size values appear to be processed but are not retained in the Annotation Text Height drop down list.

The following is my first attempt with C#:

using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.Runtime;
public class CreateTextSizes : Autodesk.AutoCAD.Runtime.IExtensionApplication
{
public void Initialize()
{
// Create following Text Sizes:  0.09375 (3/32"), 0.1975 (3/16"), 0.25 (1/4"), 0.375 (3/8")

[code].....

The following is my attempt with AutoLISP:

(defun c:LOADTEXTSIZES()
(Command "TEXTSIZE" 0.09375)
(Command "TEXTSIZE" 0.1975)
(Command "TEXTSIZE" 0.025)
(Command "TEXTSIZE" 0.375)
(Command "TEXTSIZE" 0.09375)
)

View 1 Replies View Related

AutoCad 2D :: Attribute Text - Multiple Sizes In Block

Mar 2, 2012

We have a client whom insists on 1/8" text and my blocks are all sized for 3/32". What I wanted to do is create two visibility states for the block. One using the 1/8" text and one using the 3/32" and be able to switch between them. I can get the border of the tag to work, but the text doesn't switch sizes.

Is this even possible? Is there a better way to deal with all my tags and needing to have two different versions of them? (Tags such as fixture tags, note tags, etc...)

View 4 Replies View Related

AutoCad :: Offset Multiple Polygons Collectively?

Sep 26, 2003

Is it possible to offset multiple polygons collectively, at a predifined distance to offset and towards the center of the polygons?

View 6 Replies View Related

AutoCAD Civil 3D :: Editing Multiple Alignment Station Offset Labels

Mar 19, 2013

I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.

View 3 Replies View Related

AutoCAD 2013 :: Create Dynamic Block Of Steel Angle Of Multiple Sizes And Thickness

Nov 19, 2012

I am tying to create a Dynamic Block of a steel angle of multiple sizes and thickness. I used Dynamic Blocks before and live the idea of changing sizes on the fly with out having to delete and recreate an object.. I got as far as creating an angle of different sizes, i.e.. 4x4, 5x5, etc. and different thickness but can't get the thickness to work with the radius of the angle.

View 2 Replies View Related

AutoCAD 2010 :: 3D Offset Or Scale Or Extend?

Feb 20, 2012

I have a rectangle shape (a 3D polyline) as in the attached DWG. I want to Offset, Scale, Extend (call it whaever you wish) so that the new 3D polyline (after the scale, offset or extend) is at the same plane as the original one.

Obviously the Z values of the new 3D polyline will be different from the original.

View 2 Replies View Related

Photoshop :: Reducing Multiple Image Sizes In One Go

Oct 12, 2004

I have a whole directory of images which I took with my digital camera. I want to post them on my site, however I would like to reduce their size to fit the html pages. I know how to perform this task for individual photos, but since my directory consists of many images, this task will be very time consuming.

I was wondering if there is any way to have photoshop make the same image
size reduction on all images, by running some sort of script or any other way.
If there is such a way, does photoshop also save the new smaller images?

View 1 Replies View Related

Photoshop :: Batch Saving Multiple Sizes

Mar 22, 2007

I'm using Photoshop to create my web images and need to make an "Action" to use the "Save for Web" function where it'll save 3 different image sizes (Small, Medium and Large) with a suffix at the end of the file name ("_s", "_m" and "_l" respectively), but I can't seem to find any way of getting the software to add to the filename without rewritting it completely (which I have to do manually anyway).
I have found the "Output Settings" dialog window and this looks to do everything I want, but I have tried everything I can think of and can't seem to get it working.

View 1 Replies View Related

Paint.NET :: See If Some ICO Files Are Embedded With Multiple Sizes?

Oct 29, 2013

how I can see if some .ico files are embedded with multiple sizes?   I used the .ico plug-in and selected to embed all sizes, but I am not sure if this works.  I'd like to be able to confirm it.

View 1 Replies View Related

Illustrator :: Resizing Multiple Items Of Different Sizes

Jan 16, 2013

Is there a way to resize multiple items of different sizes all at once? Say I have five boxes measuring 1", 2", 3", 4" and 5" but i want them all to measure 6", is there a way to resize them all at once?
 
Mac OS X 10.7.5
Illustrator 16.0.0

View 8 Replies View Related

Illustrator :: Way To Change Multiple Artboard Sizes?

Jun 27, 2013

Is there a way to take a document that has multiple artboards and adjust all of these sizes without selecting them one at a time?

View 3 Replies View Related

AutoCAD 2010 :: How To Create One Title Block That Fits All Paper Sizes

Mar 28, 2012

(again): how to create one title block that fits all paper sizes?
 
In the ArcGIS, the same layout can fit all paper sizes and there is no need to customize the layout for each paper size manually. For example, if the map is set up based on A4 paper size and then needed to be printed in A0 size, then all the lay out elements will be automatically proportionally changed to fit the new paper size.
 
I’m not sure if there is an equivalent features in the AutoCAD that handle this issue

View 4 Replies View Related

Photoshop :: Font Size Are Showing In Multiple Sizes

May 14, 2013

This problem of the font size being incorrect in the Character Palette is driving me nuts.

(Type Layer shows one size. Selected type shows another size. Single placed cursor shows another size...)
 
Is there a solution?

Seems like a major bug?

View 1 Replies View Related

Revit :: Printing Multiple Sheets With Different Sizes To Print

Feb 10, 2013

We are looking for an easy straightforward way to print / export an entire set of sheets to pdf.The sheets have different papersizes and we want them to be named with the sheet number + name, and possible a prefix by choice.We have Adobe Acrobat X installed as pdf printer.So far we managed to print an entire set to pdf with these somewhat annoying issues:

1. The naming adds the word "sheet" between the chosen prefix and number-name.can we get rid of this?
 
2. The prints seem only to follow the actual Revit Print-setup, on papersizes.Which means that we need to have print-sessions on every paper size used in a project.Strange that in Revit the paper print-setup, doesnt follow the sheet definitions.(?)Is there a way within Revit to solve this to a more automated workflow?Or do we have to implement third party plugiins / solutions?

View 3 Replies View Related

Illustrator :: Printing Postscript From Multiple Page Sizes?

Apr 30, 2013

I'm working at a screen shop, printing .ps files for film. Most of the art is provided from the client on seperate artboards of varying size. In the print dialog box I select "custom" from media size options. This sets my page size to the size of the selected artboard. The problem is each page needs to be a different size so I am forced to print each page one at a time. Is there a way for illustrator to change the media size per artboard?

View 1 Replies View Related

InDesign :: Print Booklet Not Allowed Because Of Multiple Page Sizes

Feb 25, 2011

Dialog box:"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."OK, but the page sizes are all the same.

View 26 Replies View Related

AutoCAD Civil 3D :: Offset Lisp Routine To Offset Selected Line?

Jun 7, 2013

I need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.

View 3 Replies View Related

AutoCAD Civil 3D :: Create Station-offset Label Style That Will Drop Trailing Zeros In Offset?

May 14, 2012

I am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc.  it will display the entire offset.

I created two expressions:  IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)

and this one:  IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)

I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions. 

I have attached the file, the style is ACHD-Sta Off-Rt [copy]

C3D 2011, Win x64

View 9 Replies View Related

Photoshop Elements :: Why Do File Sizes Change / When Use Process Multiple Images To Add Watermarks

Feb 22, 2014

I'm using Elements 11. In order to add watermarks to many JPG pics at once, I use the function "Process Multiple Files".
 
I select a source folder and a destination folder, and adds a three digit serial number to each file. I do NOT tick the checkbox marked "Change picture size". After that I define the watermark I want printed on my pics and hits OK. All the files in the source folder are processed and saved, with a new name in the destination folder. Fair and square.
 
But. The file size of the new file is heavily reduced, compared to the original. It goes from 10 MB down to 500 KB (in general). Why is that? Is there any way I can prevent it?

View 5 Replies View Related

AutoCAD 2010 :: Batch Plot To PDFs (Multiple Tabs / Multiple Files)

Jun 4, 2012

I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it.  I would like each tab to be a separate PDF file.  We are utilizing Acrobat X to write the PDF's.  AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file. 

View 6 Replies View Related

AutoCad 2D :: Length Of Offset For Each Offset

Nov 28, 2013

I need a pit configuration, and I use the offset command to offset a base polyline to first 10 m and then 3 and so on.. is there a way to do this in an automatically way, that you can choose the lenght of the offset for each "offset" (i.e. 1st 10 m, 2nd 3, 3rd 10 m, 4th 3 m, and so on. I am actually using civil 3D.

View 2 Replies View Related

Maya Animation :: Audio Offset Will Not Scrub At Offset Frame

Apr 9, 2013

I am using MAYA 2012 on Windows 7. When I import audio (.WAV) it works fine, but if I offset it to a later frame the waveform moves to the right frame but when scrubbing the audio stays at 0. Making if very difficult to lip-sync. I have tried re-caching, playing the scene all the way through and all other options I have seen online.

View 1 Replies View Related

Illustrator :: Multiple Offset Outlines On Closed Or Non-closed Path

Sep 27, 2013

i want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
 
i searched all over the net for answers with no success.

View 4 Replies View Related

AutoCAD LT :: No DIM Boxes On Rectangles

Oct 22, 2013

Let me start by saying I am not an AutoCAD wiz by any means.  I have AutoCAD LT 2013 at my work and for the last year I have used it with no issues same as I have for the last 10 with previous versions.

This morning I came in and I cannot pan with my scroll wheel or double click the scroll wheel to zoom to extents.  I have tried checking the settings for the wheel for pan and zoom and they are both at "1"

Whats even more frustrating is now all of a sudden I cannot enter dimensions for rectangles and other items with the small boxes that usually show up next to my item on the workspace (20" - "tab" - 12" - enter to get a 20x12 rectangle for example).

I have gone through every option section; I have tried rebooting my computer; I have looked at the settings for the mouse and nothing seems to do anything.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved