The reason i registered is because I have a question I have not been able to find an answer to. Is it possible to have multiple UCS's defined and toggle between them? Sort of like how you can toggle your iso planes. The purpose would be when dimensioning an object, being able to toggle between the different UCS's in order to use linear dimensions on different angles.
View 5 Replies
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedCivil 3D 2013
Windows 7 x64
I've found several people that had this problem through searching, but none of the fixes worked for me. I'm unable to use the quick select feature as it does not list anything other than "multiple". I've tried different files, different selections, repaired the installation, complete reinstall, updated with SP1 and hotfix 3 to no avail. I also have Autocad 2007 with SP 1 installed, as well as Autocad Architecture 2014, if that makes a difference.
My quick properties palette is only showing about 4 lines...(actually about 4.2 lines - explained below)
I've already changed the minimum number of rows to 20, under 'Palette Behavior', under 'Quick Properties', 'Drafting Settings', and' Tools'.
I've closed and reopened Autocad several times since i've set this, but QP box will still not show more than 4 complete lines.
I've also gone to the CUI and changed the number of attributes i want to show for each different kind of entity, so i know it's not because i dont have enough lines to show....in fact, i can see a bit of the next line....i just can't drag the window any bigger!
I am using quickmask in removing redeye and since the mask color and the red of the eye are almost identical it seems that changing the masking color to something like lime green.
View 6 Replies View RelatedI want to increase the exposure of a batch of photos by one quarter of a stop.The Quick Develop module seems to allow only one third increments.Can I change this? The Sync function matches absolute exposure. So apparently do all the presets.I see that there is a third party plug in that may do this, but is there no way to do it in Lightroom 4?
View 3 Replies View RelatedMy White Balance has managed to find a new scepia setting, and I can't get it back to "As Shot".
View 2 Replies View RelatedChange the menu item Quick off to Slow off.
See attached. It now take 4 pen actions to get the safe titles overlay on and off. And before it was one pen movement. So before it was aptly named quick off. Now you should rename it. Slow off. Or "waste of time" something that matches function.
I vote for reinstating the quick off operation from 2012. And I checked, there is no quick off in the hotkey editor, so I can't streamline the usage with a user key.
[URL]........
I have about 100 blocks. They are different in many ways, but all have multiple linear distance parameters, and these have the distance max set to lengths (all of them have different lengths).
I'd like to be able to change the distance max without having to open each block and do this manually.
Is it possible to export block info into Excel and then change it in Excel, and reimport into AutoCAD, saving the new information?
Or is there another way, through Lisp or some other part of AutoCAD that I don't know about?
is it possible to select multiple text in a file and change the content of all of them at once? Similar to the attribute, when you select different blocks and change their attributes at once. Is there a method including lisp that can do this?
View 9 Replies View RelatedI have a dwg that is converted from vectorworks with 100+ blocks of different names. All line-weight and color is set to 0.00mm and white.
I want to be able to organize multiple Block into same layer so I can color them by layer and change visibility (hide/Lock) by layer. but when I select everything to organizes "by layer" only non-block line can be organized.
Is there a way I can change multiple block into same layer without exploding them?
I try:
1. select block and change layer in properties.
Failed.
2. "set to by layer"
Problem: layer of block is still not changed when open with reference edit.
i've got a drawing from another company that has a bunch of points. i need to change all the styles to flatten them to a 0' elevation instead of the elevation they were shot at. i don't want to go through each point style to change that one setting. is there a way to do them all at one time?
View 1 Replies View RelatedI was wondering if there is a way to change multiple entities of Mtext. I tried CHT but the options are limited. Is there a way of say changing the color?
View 6 Replies View RelatedIf we want to change the color of a block we have to open block editor and change the color from there.
If in a design we have 100 blocks and we want to change their color to the same (say black), how can we do that? Do we have to do it for every single block or can we select all 100 blocks and change the color uniformly?
I have a user who inadvertently changed the text contents of an mleader from "ByLayer" to 1,255,0, which is giving us some serious issues with our plotting, as we use a .ctb file for printing. Unfortunately, this error must have occurred fairly early in the project, because it is now replicated throughout the 100 page set. The text color was changed through the mtext editor, so just changing the overall properties of the mtext or leader doesn't affect the text. The only way that I know of to correct the issue is to edit each piece of text, select the contents, and change them back to ByLayer. This is going to be a real pain.
So here is the question: Is there a way to change the color of multiple pieces of mtext, without opening each and every individually?
I'd like to change multiple doors ( & multiple styles) so I can close them all. Is there a way ?
I think you can only change them in "properties" if they are all same style.
Is there any way to change the msltscale variable to 1 and the scale to 1/4"=1'-0" in multiple drawings without opening each and doing it all manually?
View 9 Replies View RelatedHow do I change the font styles of multiple mtext's.
Select all the boxes, type mo for properties, then change the style in the properties window. To make this simpler in the future I put all the text boxes in their own layer so I can use qselect to select them all quickly.
I need to change an entire assembly's parts to a different material. How can I do this without editing each part?
View 2 Replies View RelatedIs there a way to change an iProperty, specifically the iProperties->Project->Project field for multiple parts automatically.
I use the iLogic Design Copy Tool to copy over an entire project, and for the most part the only changes is the project number.
I didn't see a way to change this in the Design Copy Tool, possibly there is some other tools that can do this that I don't know about. But if not, I am assuming a small script (VBA??) would be required to do this? whether it is in Inventor or just an outside program to carry out this change.
I found this old thread, but it seems that people just found another way to do this?
[URL]
My workflow would follow something like this:
-Use iLogic Design Copy Tool to copy over project to new folder
-Open up full assembly
-Run rule or script to update all parts in assembly with new Project iProperty
-Save
-update the drawings as I need, (they will all need to be reviewed as some parts will be modified anyways)
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have 2 assemblies and drawings of those assemblies. in both the same part is among the parts.
I want to change the name of the part that is in both assemblies with the Design Assistant, but i am afraid that if i will choose one of them and change the part file's name, the other assembly will be damaged. is it true?
I think this might happen because when i open only the part in Design Assistant, it doesn't let me change it's name, so, Design Assistant might not know where this part is inserted in.
i create multible blocks (min. 100 blocks in diffrent name) with Diffrent hatches in that block....
i want to change the scale in all diffrent hatches.. in all block...
i want any lisp....
I'am trying to create a block that has 3 components that can change
1- crane model or base
2- crane boom has different lengths and needs to rotate at pivot point
3- crane jib has different length and offsets from the crane boom
You can do this in one block or do you need to have 3 separate blocks and just piece together?
I have an assembly with multiple parts.
I wish to change the colour (how they're displayed) of a few of them.
When i right click on the part, i can select iProperties>Occurrence>Appearance
When i control + select multiple items, then right click, the Appearance tab is greyed out.
Not a huge problem at the moment, but in future, I may wish to make 30 + different parts a different colour and would like to do it in one step.
I'm having difficulty making a change to multiple texts. I received a drawing from another firm that uses different text styles than my firm. I can change all the text styles to mine, but they all hold onto their original fonts. How to change the fonts in multiple instances.
View 3 Replies View RelatedHow to change the color of a bunch of files in an assembly easily? I don't want to open each file (70+) and change them manually only to find out there was an easier way to do it.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I have a number of attributed dynamic blocks with multi vis states, that I wish to change from attribute text width factor 1, to 0.85, as per client specified requirement for the particular project. There are quite a number of different named blocks on each sheet, copies of each block, and quite a number of sheets involved.
Using BATTMAN or EATTEDIT I cannot select all attributes and change width factor in one go. It can only be done one at a time, a laborious task at best. GATTE appears not to be able to change width factor.
Any method of selecting all attributed blocks in a sheet, then changing the attribute text width factor on all to 0.85 in one fell swoop?
Is it possible to change the Alignment Labels Major Stations Increment for multiple Alignments ?I have 50+ Alignments. Each of them labelled with 100m increment for major stations.I would like to change them to 50m interval.
View 2 Replies View RelatedIs there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
I use civil 2012, and have a drawing with over 400 attribute blocks that are all set to be "green" in the enhanced attribute editor, properties tab. I would like for all of the attributes to be set to "by layer". However, I find that the it only allows me to change one block at a time. As said earllier, I have over 400 blocks.
View 2 Replies View RelatedI've cut and "paste special" a table from excel to autocad, and would like to edit several (not all) cell's text color from the default (in this case white) to the bylayer color.
When I set up my table style I specified the text to be bylayer, however apparently a paste from excel ignores the setting.
