I create lots of layout tabs with long (ish) names. To save scrolling through the tabs using the arrow buttons to select the one I want, is there a way to generate an index tab so all tabs are listed on it and can be selected from that "index" Tab/list?
View 4 Replies
read that color management pdf by gennady petrov and tried a few things he wrote. I turned off color management in the printer driver, chose corel to manage color, and the image default profile sRGBxxxxx. picture was way dark and ugly. tried several other profiles and same dark picture. hmm that did not work so well.
went back to the printer driver and disabled no color management, and chose the profile Adobe RGB. still kept corel as manager and chose A RGB as the profile and the print looked spot on. Have not had problems printing from corel because I have come up with my own system, but was quite surprised at the result from turning off color management in the printer driver.
How does one index the documents in the documentmanger collection? The intent is to cycle through the open documents one by one in a forwards or backwards direction. The specific function I want to create would take a direction argument, 1 or -1, and would switch the active document to the "next" or the "previous" document. how the documentmanager collection works.
View 2 Replies View RelatedI created plan and profile sheets using the P&P tools. Then I created a new drawing and attached (XREF) the dwg with the viewframes in it. Then I set the viewframe layer to Plot instead of non-plot and I changed the color so that it would be heavy (we use CTB).
Then when I went to my PSPACE layout to try and plot, the viewframes are NOT there. The layer IS turned on, because there's a PLINE that I drew on that layer and it DOES show up. When in modelspace, the viewframes are there and the color did change as expected.
So why do they disappear when I'm on the layout tab?
The goal is to create a plottable sheet that identifies where each sheet is (I want to point to each viewframe and lable them C-101, C-102 etc).
Point Cloud Index fails on Faro Scans that work in 2012???? Â Tools in 2013 seem better. Â Civil 3D and Point Cloud data.
View 4 Replies View RelatedACA2011 (I've been on 2008 for years until very recently...)
How do I create a sheet index on my Title Sheet? Do I create a Table? If so, how? I've never created one before. I kept seeing references to the Sheet Set Manager...I don't know what that is or where to find it...
I'm pretty adept at scheduling, etc. and feel confident that I can do this, but I just need the initial steps.... I thought that I could just grab a piece of text on the title sheet and insert a field that references the Sheet Set...clearly that ain't the way!!!
I am using ImageList to store a group of images.
I would like to read the image name from the imagelist based on index value.
I created an index for every grade break in my profile, and when I delete a PVI with geometry tools the numbering of this labels starts in the consecutive of the last one that the profile has. How can make this index numbering to keep starting at 1 when I delete one, instead of starting at the next to the last index label?
windows 7, intel I7, 8 MB RAM, civil3d 2013.
I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies View RelatedWe have this very cool tool that automatically creates a custom sheet property (IndexNo) and indexes all sheets in the active sheet set. Unfortunately, it doesn't run in 2012 and the guy that wrote the application no longer works for us.
View 7 Replies View RelatedI want to make a list of layers due to their index (order) in the "layers combo box" in the AutoCAD. I prepared this:
(defun c:ListLayers ( / a b)(setq a(list(cdr(assoc 2(tblnext "layer" T)))))(while(setq b(tblnext "layer")) (setq a(append a(list(cdr(assoc 2 b))))));while);end
But, It's not match with the order of layers.
I'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Â Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. Â If I could open it once I could start deleting stuff from it, but it is too large to even open.
I am trying to find a way to create an index drawing without having to input much information in.
I would like to export the attributes from each drawing file in my (project folder) from the title-blocks (drawing numbers and descriptions) into excel and then be able to just data link that into my Index table in AutoCAD. I know i could put the info in excel and import it into my table in CAD but i am looking for something more Automatic, so that every time i need to create an index it will automatically extract the info from the drawing files title-blocks.
Where is the button to click to change 2009's layout to a "classical layout"?
View 6 Replies View RelatedI'm having a bit of a problem struggling with creating new dimension style using vee bee dot net, in AutoCAD 2010 environment. I am particularly trying to figure out how to set the newly created dimension style to color white, and to assign it a specific layer (for example, a layer called "test"). What the code syntax is to accomplish this?
I post the code below for what I have done thus far:
Public Shared Sub addDimensionStyle(ByVal strDimStyle As String)
Dim acDb As Database = HostApplicationServices.WorkingDatabase
Using acTrans As Transaction = acDb.TransactionManager.StartTransaction()
Dim dimTbl As DimStyleTable = acDb.DimStyleTableId.GetObject(OpenMode.ForWrite)
Dim dimTblRec As DimStyleTableRecord = Nothing
[Code] ........
Using Set Sheet Manager, I am trying to create an Office Standard Sheet Index Table.
I have begun by copying the Standard table and modifying it. I have adjusted the cell styles to reflect our colors and text types and sizes. I have also added two additional columns for revision number and revision date.Â
I have tried saving the new table ... and inserting a new table through the sheet set manager
the only tables i can bring in include the 2 original columns (sheet number and sheet title) and specified text font, size and color are maintained, but the additional columns and the column width are lost.
Ideally i would like the office format to be maintained...with little or no  modification required of the user.
I'm attempting to create an easier way to change layer colors of nested linework by selecting the linework and having the ACAD index color dialog box appear to select the replacement color.
defining the "ic" variable;
Â
(defun c:clc (/ ent ent_data ic ent_lay) ;change layer color(setq ent(nentsel)) (setq ent_data(entget(car ent)))(setq ic ;index color(cdr(assoc 62(ACAD_COLORDLG))))(setq ent_lay(cdr(assoc 8 ent_data)))(command "-layer" "c" ic ent_lay ""))
If a layer is called index can you unlock it?
View 6 Replies View Relatedmy layers palette is greyed. can I use index color with layers?
View 2 Replies View Relatedi need to unlock this index layer..with this layer locked iam unable to glide it over to another psd file..
View 2 Replies View Relatedusing Windows, I cannot get the "Swatch after Index color" percentage color ratios information. Is this exclusively a Mac photoshop bonus?? ... This is exactly what I'm looking for ... a precise method to mix pigments. Thanks a million for any help. My goal was to sample a color and come up with a general recipe for a color mixture using traditional artist pigments. This is what I've done so far...1. Create a swatch set that represents my paint palette2. Sample the color I want to separate3. Fill a 10 pixel by 10 pixel doc with the sample color4. Convert to Index Color using my paint palette5. Each pixel represents 1% of a paint color It's very tedious but it's all I can come up with
View 8 Replies View RelatedI would like to have a sales promotion pop up voucher load as soon as the index page loads is this possible in Xwdp7.
In the attached file you can see the white sales voucher over the Jesters restaurant page.
I have recently upgraded to Lightroom 5. When I try to export a fairly large number (about 60) images as JPG, I get an error message "attempt to index a nil value" and some images do not export. When I view the images in the library and export them individually, the export works. So I conclude that the images are not corrupt, but that there is a bug in the software.
View 1 Replies View RelatedI know that Bridge stores the actual keyword(s) with the image files but where is the overall "index" located on my hard drive?
The index is the structure that gives the instant access through the images.
I want to specify which colors Photoshop can use and I'm doing that (or at least trying to) by using custom index coloring and the color palette. I am using another person's saved color table. This person saved several shades of grey and when I delete these colors my picture is affected. What is puzzling me is that deleting greys have an impact on my picture even though I am not using any grey. Is there an impact because Photoshop is blending colors within the color table to make the picture. Is grey one of the blended colors? I do not want there to be any blending of colors--I just want Photoshop to use what colors I specify.
View 2 Replies View RelatedI working to modify one of the templates for the Web Photo Gallery, and am wondering if there is a way to designate in the template what to name the index page besides index.htm or index.html.
I'm working to create a site that will have many photo galleries. And while it does work to have each gallery in its own sub directory with the main gallery page named index.htm. I would prefer to have the main gallery page renamed during the automation process for easier archiving.
I just had an MXF deliverable fail out of a broadcaster's pipeline because it didn't have a Random Index Pack in the file. They were also concerned that they could not preview the file in VLC before submitting it to their pipleline.
Â
The spec of the file was DVCProHD with 10 channels of audio. The asset management system they would've submitted it to was a Digital Rapids StreamZ, but they have some sort of file checker script they run on it first so that they don't waste time copying or re-encoding any files that don't conform to their spec. (which is a bit vague, but it sounds like my MXF would've passed except for this one issue)
Â
I just wanted to share this document I came across while looking for info on MXFs. URL.....It sheds some light on this dream I have where I might someday be able to insert edit a single shot into a feature length file as simply as I can on a tape.
when saving images for the web i try save them as indexed png's to save space.
however, when switching to indexed mode GIMP will alter my colours if i choose to use a palette with less colours than i have in the image. This is the most noticable if for example i have an image with bacgkround #ffcc00 and a multicoloured icon in the middle. due to the icon the image probably has over 100 colours. if i then choose 64 colours not only will it affect the colours in the icon, but change the entire, large, unicoloured background area to maybe fec50a (just an example). is there anyway to force GIMP to only use colours already present in the image?
I have been using indexed mode to save 8-bit png files for the web, just as one would through the Save For Web interface in photoshop. sometimes it works brilliantly, usually when very few colors. but sometimes it changes some of the most dominant colors in the image. for example, if i make an image with background in #f3f3f3, two antialiased type layers in different colors, flatten the image and switch to indexed mode the background will change to something like f3f201 or whatever depending on the colors of the type layers (even if i choose 256 colors...).
EDIT: ok those exact instructions didn't actually replicate the problem this time that i tried it, but nonetheless the problem exists. if no one recognises it i will save the file it occurs to next time so you can all replicate the problem.
EDIT 2: happened immediately. i have attached a png of the file, even if you set it to 256 colors, switching to indexed mode will change the white background to #fefffc. once again, one could go into the color map and change it back to pure white, but to be completely correct one needs to change every color in the shadows (and antialiasing) that fade into the white, which will also have been offset by the switch to indexed mode.
In my document, all index entries will come from text located adjacent to an image, or on the facing page. I had planned to create a uniquely named character- or paragraph style for this purpose, and to import all items formatted in that style into the index topic list. Or is there some better method of tagging the captions?
Â
Each figure caption consists of two parts: botanical name and source. If this design works, I propose to format the first part to a unique paragraph or character style, and add that to the index.
Â
if that is the best approach, or other approach, and how best to implement it.
Can InDesign CC create an index using multiple documents (i.e., the chapters of a book)?
View 3 Replies View Related
