I created an index for every grade break in my profile, and when I delete a PVI with geometry tools the numbering of this labels starts in the consecutive of the last one that the profile has. How can make this index numbering to keep starting at 1 when I delete one, instead of starting at the next to the last index label?
windows 7, intel I7, 8 MB RAM, civil3d 2013.
I'm using Civil 3d 2010, in profile curve details are coming worng, PVI station is OK but LOW PT station of curve is wrong, also in Civil 3d 2009 no any curve details are coming. I'm sending the secreen shot of profile.
View 1 Replies View RelatedI have a pipe network (data shortcut) showing in the profile.
The pipe network was designed from station 98+65 to 100+00.
But the first pipe (from station 98+65 to 99+30) is shown going from station 99+30 to 102+60.
The pipe has a lenght of about 65' and some how it is being projected incorrectly.
The profile is shown going from right to left.
See attached image.
Windows 7 64-bit
Civil 3D 2012 SP2
I created plan and profile sheets using the P&P tools. Then I created a new drawing and attached (XREF) the dwg with the viewframes in it. Then I set the viewframe layer to Plot instead of non-plot and I changed the color so that it would be heavy (we use CTB).
Then when I went to my PSPACE layout to try and plot, the viewframes are NOT there. The layer IS turned on, because there's a PLINE that I drew on that layer and it DOES show up. When in modelspace, the viewframes are there and the color did change as expected.
So why do they disappear when I'm on the layout tab?
The goal is to create a plottable sheet that identifies where each sheet is (I want to point to each viewframe and lable them C-101, C-102 etc).
Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies View RelatedIn my company we use the SSM and label our sheets as follows:
(Sheet Number) - (Sheet Title)
G-1.00 - Summary of Quantites
WM-1.01 - Water Main
etc...
In the border we would like to put page SHEET XX OF YY. The Total count is simple with a custom field however how would I get the XX part to show the sheet number as a number and not G-1.00.
I have a user that is on a 4 sheet site plans set and is opting to prefix his sheet numbers with C-. I have n issue with that, but he is also forcing the numbers into the hundreds with C-100 for sheet 1. In and of itself I wouldn't be too bothered by it except he is insisting on sheets 2-4 to C-200, C-300, C-400.
My biggest issue is this is making some inconveniences with SSM.My second issue is why use 5 character for a single digit.
My last peeve is if I see drawing C-100 my minds eye is looking for C-101 through C-199 and so on. Also if your using C- for the civil drawing would that preclude the need for C-200 - C-400?
What is the benefit to numbering alignments?
Example: Street CL (1), etc.
When I have a street centerline alignment, I am failing to see any benefit. If I have a change, I want the change, not any old stuff. If I have a need to different alignments for differing purposes, I'd rather give each my own unique name. If I make a change, and I want that change easily reflected into a profile or corridor, wouldn't it be more efficient to let the name remain constant?
Do you allow the program to do this?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
When I enable lens profile correction, choose default, auto or custom, LR5 will assign Tamron 28 75. However, the correct lens is the Tamron 24 70 (nikon). I checked my Lightroom 5 lens profiles list and the Tamron 24 70 is listed. How do I get LR5 to recognise the correct lens?
View 2 Replies View RelatedToday I took some pictures, mostly RAW, but a few JPGs. Lightroom 4.1RC, Windows 7 64bit..When I use the Lens Correction feature on the RAW photos, the proper lens is selected, a Nikon AF-S NIKKOR 16-85mm f/3.5-5.6G ED VR.
When I use the Lens Correction feature on the JPG photos, the proper lens is NOT selected, instead I see it has selected a Nikon AF-S DX NIKKOR 14-24 f/2.8G ED. In fact, next to "Model", I cannot even select the proper lens (the 16-85mm lens) because its not in the list.
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedSteps to reproduce:
1. Take a screenshot of something in your web browser (macintosh CMD+SHIFT+4) to the clipboard.
2. Select File > New from the menu. Clipboard should be the selected Preset.
3. Notice how in CS6 the color profile under "Advanced" is "Display" and NOT "sRGB" — in CS5 it is sRGB.
4. Paste from the clipboard into your new document and get the color profile mis-match warning if you are in CS6.
It is either not picking the color space of the clipboard properly like it will in CS5, or I am missing something somewhere.
Nothing I do in an attempt to fix this is working. I have sRGB set as my default profile in color settings, and nothing I do changes this setting for the "Clipboard" preset.
I am getting sick of forgetting to manually select "sRGB" every time, opening up a new document sized to my clipboard and then getting the color profile mismatch warning when I paste in the clipboard contents!
I take so many screenshots as I develop websites this is a CONSTANT problem as I am constantly creating new documents from the clipboard to check alignments, zoom in to get color samples, and many other reasons.
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedIm creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedI have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedI am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View RelatedRunning Lightroom 4.3 on my Mac, I have my D600 set to shoot using "Camera Neutral" profile. However, upon import into LR, for some reason, it changes to "Adobe Standard" profile. I can change it to camera neutral, but it's difficult.
View 1 Replies View RelatedA tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.