Photoshop :: Mac :: Cannot Get The Swatch After Index Color
Aug 7, 2009
using Windows, I cannot get the "Swatch after Index color" percentage color ratios information. Is this exclusively a Mac photoshop bonus?? ... This is exactly what I'm looking for ... a precise method to mix pigments. Thanks a million for any help. My goal was to sample a color and come up with a general recipe for a color mixture using traditional artist pigments. This is what I've done so far...1. Create a swatch set that represents my paint palette2. Sample the color I want to separate3. Fill a 10 pixel by 10 pixel doc with the sample color4. Convert to Index Color using my paint palette5. Each pixel represents 1% of a paint color It's very tedious but it's all I can come up with
View 8 Replies
ADVERTISEMENT
May 27, 2009
my layers palette is greyed. can I use index color with layers?
View 2 Replies
View Related
Jun 15, 2009
I want to specify which colors Photoshop can use and I'm doing that (or at least trying to) by using custom index coloring and the color palette. I am using another person's saved color table. This person saved several shades of grey and when I delete these colors my picture is affected. What is puzzling me is that deleting greys have an impact on my picture even though I am not using any grey. Is there an impact because Photoshop is blending colors within the color table to make the picture. Is grey one of the blended colors? I do not want there to be any blending of colors--I just want Photoshop to use what colors I specify.
View 2 Replies
View Related
Jan 2, 2013
To create a special effect (but not TOO garish!) I'd like to change this brownish meadow so that it looks much more like one of the swatches from my color swatches panel.
Â
Do I need to create a new adjustment layer, or are there other approaches? Below is a screen shot.
View 2 Replies
View Related
Jun 10, 2013
I have a colored object, and I have a specific swatch of color that I need to change the current color of the object to. The problem I'm having is that the specific color that I'm trying to apply to the object doesn't look integrated with the object itself, it just looks like I've applied a color film over it. It's milky-looking and there's not enough contrast. I've tried adjusting levels, using different blending modes, using the Match Color command ..I can't seem to keep the integrity of the color I'm applying to the object, while still keeping the integrity of the details of the object itself. How should I tackle this using multiple layers and blending modes, and so the new color looks integrated and believable?
View 8 Replies
View Related
Jul 23, 2008
I typically create graphics using index color that are black/white with some gray tones to highlight a part of the drawing. The graphics are published in a PDF document, are typically a very manageable file size and initially look great. The problem is the PDF documents are typically 500 pages and the file size is reduced in Adobe Acrobat Standard. After reducing the file size, all index color graphics appear bloched or very fuzzy when viewing the PDF on a monitor. The printed PDF document has some fuzziness but the image quality should be improved. Do you have any suggestions to improve the image quality of index color graphics in a reduced file size PDF document? Or any suggestions to create sharp black/white images with gray highlights in a better way or avoid making the image fuzzy?
View 1 Replies
View Related
May 30, 2013
When I create a shape with a Pantone Color and then decrease the opacity in the color swatch palette, then go to my swatches palette and select "Select All Unused Colors" it highlights the pantone color being used in the file. In previous version, it never did this.  This is for CS6. Any know fix for this?
View 2 Replies
View Related
Jul 15, 2013
What is the default color swatch for PS CS6?I no longer see it. I may have lost it.
View 2 Replies
View Related
Feb 14, 2013
I made a pattern in illustrator c6 (lets say simple dots in rows) and I want to color this dots with a swatch (which means a specific color that changes automatically when I change this particular swatch). It does change the color but it also causes a lot of troubles, it makes weird compound paths and illustrator gets very slow...
View 2 Replies
View Related
Oct 23, 2012
How do I create the swatch set and I can't get the logo layers colored in?
Â
Choose the Magic Wand tool , making sure "contiguous" is checked in the Options bar. Select the rectangle under "Monochromatic (Single Hue)". Press Alt+Backspace (Windows) or Option+Delete (Mac OS) to fill the selection with the foreground color.Â
#Open the Color Picker and select two values of your base color. Apply your color selections to the "Values" swatches.
Next, select two intensities, and apply to the "Intensities" swatches.
Now that you've got your color palette, combine the colors into a swatch set. Use the Rectangular Marquee tool to draw stripes and fill with the colors you've selected above. This is a space to experiment with how the colors look next to each other.
Ready for the fun part? Make a selection around the client logo using the Rectangular Marquee tool. The logo has been separated into layers to make color application easy. First, apply color to the "bg" layer. Sample a color swatch using the Eyedropper tool , then press Alt/Option-Backspace to fill with color.
Keeping the selection active, click the "top curves" layer. Sample a color with the Eyedropper tool, then press Alt / Option-Backspace. Move on to the "middle curves" layer. Select a color, and fill.
Next up, "bottom curves":
View 1 Replies
View Related
Jul 18, 2013
I'm having a bit of a problem struggling with creating new dimension style using vee bee dot net, in AutoCAD 2010 environment. I am particularly trying to figure out how to set the newly created dimension style to color white, and to assign it a specific layer (for example, a layer called "test"). What the code syntax is to accomplish this?
I post the code below for what I have done thus far:
Public Shared Sub addDimensionStyle(ByVal strDimStyle As String)
Dim acDb As Database = HostApplicationServices.WorkingDatabase
Using acTrans As Transaction = acDb.TransactionManager.StartTransaction()
Dim dimTbl As DimStyleTable = acDb.DimStyleTableId.GetObject(OpenMode.ForWrite)
Dim dimTblRec As DimStyleTableRecord = Nothing
[Code] ........
View 5 Replies
View Related
Dec 12, 2012
I often use a photoshop template to create work and was wondering id there was a way to select all items that use a particular swatch color and change them to another swatch color? Right now, I have to find each instance I use that particular color and change them one by one to the new color and was trying to find a better way to do this.
View 4 Replies
View Related
Apr 15, 2004
I read in this magazine a week ago about making a swatch from an image. I forgot how it was done.
for example, you find an image online and like the color scheme. You can do create a new swatch that has all the colors in that image only.
View 13 Replies
View Related
Aug 1, 2013
I'm attempting to create an easier way to change layer colors of nested linework by selecting the linework and having the ACAD index color dialog box appear to select the replacement color.
defining the "ic" variable;
Â
(defun c:clc (/ ent ent_data ic ent_lay) ;change layer color(setq ent(nentsel)) (setq ent_data(entget(car ent)))(setq ic ;index color(cdr(assoc 62(ACAD_COLORDLG))))(setq ent_lay(cdr(assoc 8 ent_data)))(command "-layer" "c" ic ent_lay ""))
View 3 Replies
View Related
May 23, 2011
I've just created a map with various county boundaries. I now need to fill in the counties with various shades of gray, with no two neighboring counties sharing the same shade. I've been going about it in a sort of trial and error fashion, but I can't ever seem to get it right. Is there a way that Photoshop could possibly fill it in for me? Sort of an auto-swatch application thing?
View 2 Replies
View Related
Jan 28, 2014
Is it possible in LR4.4 colorizing the developed picture with a color outside the swatch (I mean the color taken from the same picture). Martin Evening in his "The Complete Guide for Photographers" says "yes". Alas, all my tries are ineffective.
View 1 Replies
View Related
Apr 10, 2007
I'm using Adobe Photoshop 9.0 cs2 and I need help with a large color replacement project. I'm an amature video game designer making a level for the classic P.C. game Doom 2 and I'm creating a new weapon and monster for the level I'm creating. For the monster I plan to alter the colors of the frames of the original monster and change the dimensions of key features.
use an indexed color mode that were extracted into individual .png files.
Today I made the big mistake of changing the frames over to RGB mode so I can use the color replacement tools available in that mode. I should have done one frame first then convert it back to indexed color mode because the frames look terrible when converted back from RGB mode. What it is doing is using all the colors of the RGB color spectrum to replace various colors. Unfortunately what this means is that its using colors that are not in the color palette I loaded in the original pic and when I convert it back it looks terrible. There are enough colors in the doom color palette to produce the look I'm after but the automated conversion process from RGB to indexed colors does not pic the best matches in most cases. By doing this I am taking an image consisting of about 150 different shades of color down to about 75 different shades of color. I cant find any color replacement tools for indexed colored images and its going to take me forever to do all frames pixel by pixel so I need one of two things to be able to accomplish what I need. Either a better way of converting these images back, or some tool I can actually use in indexed color mode. If there is a way to select a pixel and change all other pixels of that exact color to a new color then I can just do it pixel by pixel that way. I need something here or I'm going to lose hours of work. If there is a way to load my color table into RGB mode to limit what colors it uses that might work too.
I would just leave the pics in RGB mode if the game im editing for could use that format but unfortunatly anything I convert to RGB will have to be converted back to 256 colors for it to work in the game.
View 1 Replies
View Related
Jul 19, 2012
How do I redefine a swatch color?
View 4 Replies
View Related
Aug 30, 2013
We just got illustrator cs6 in our office. I was given a book and told to learn it, but WOW, it is not easy.
Â
I feel like an idiot asking a question that should be basic, but I swear I have been seaching all over the place and can't find the answer.
View 2 Replies
View Related
Feb 9, 2014
Is it possible to make changes to the default color swatch and have those changes appear as the default color swatch whenever you open Illustrator CC?
View 1 Replies
View Related
Aug 4, 2011
I am having troubles loading a .avi file into the diffuse color swatch.I am following tutorial which comes with 3ds max.(Animation Tutorials-Creating Explosions) There is a plane and i must load a video file with explosion (.avi) and assign that material to it.So i make new mateial,choose Bitmap on Deffuse color swatch and when i browse for the video file i can see it in the browse window but when i select it i cant click "Open". Also 3ds max comes with the tutorial files ready , so i tried to open the ready scene and in it , the plane is with assigned material on it,but the .avi file can not be seen, even when u render the scene.)
View 6 Replies
View Related
Jul 10, 2012
When I drop a swatch color on a gradient, it doesn't link to the swatch color like in a solid fill.Nevermind the UI inconsistency with this behavior, since Adobe probably doesn't care, but how do I get around this?
Â
Creating a Swatch from the gradient is not a solution for me, as I use the same base color in different gradients.
View 2 Replies
View Related
Oct 13, 2009
we have a website concept in Illustrator CS3, with named swatches for all colors. I'm wondering if there is an easy or 'semi-automated' way to generate a chart of the swatches we are using, showing there hex values?
Â
I know I could draw out a bunch of boxes, fill them with the swatch colors, and manually look up and type in the hex values for each. But this would take a LONG time, as there are a number of color variations.
View 15 Replies
View Related
Sep 26, 2013
Whenever I try to create a new CMYK color swatch it automatically opens pattern swatch name panel. Why won't it let me create a color swatch?
View 4 Replies
View Related
Jul 9, 2013
Is there a way to save an lllustrator color group as an ASE swatch library? When I try to do this, the entire library, including all the default swatches, are saved, when all I want are the particular swatches I've added to a new colour group. I want to be able to save swatch libraries for various clients, then be able to access them in InDesign and Photoshop as well. Or alternatively, is there a way to remove unwanted swatches from a swatch library once it's been saved? (Using CS6 on a Mac running 10.8.4)
View 5 Replies
View Related
May 26, 2013
Is there a Hexadecimal Swatch Palate or Color Picker for Illustrator CS5? If not -- in CS6 - as I'm thinking of upgrading.But it seems like such a thing is so basic, surely I'm just missing it?
View 11 Replies
View Related
Aug 13, 2013
i want to get the swatch color of active document . i use 3 to 4 colors both cmyk and pantone which is in swatches now i want to get their values using script.
View 1 Replies
View Related
Feb 24, 2012
I've been looking for scripts online that would create a color swatch legend to list the colors used in my illustrator file. I found this (see below) and tweaked it to place properly on my particular page, but it adds everything in my swatches panel to the legend. Ideally, I'm looking for a piece of script to add that would only add used swatches to the legend, or a script that would only add spot colors to the legend.Â
Â
var docRef=app.activeDocument;
var SwatchBoxSize=24;
var swatchBoxSize=parseFloat(SwatchBoxSize);
var swatchBoxTop=swatchBoxSize+314;
[Code] ......
View 2 Replies
View Related
Mar 20, 2012
I have a couple thousand AI authored EPS files with a specific swatch name (SpotBlack) that I would like to rename (black) -- is there any method to do this en masse, preferrably outside of Illy using a text editor?
View 7 Replies
View Related
Mar 21, 2012
Is there a way to read the swatch used for fill color of a page item?
Â
I can read the fill color but I can't read if the color is a global swatch.
View 2 Replies
View Related
Dec 31, 2012
I have an AI file containing seamless pattern swatches.I'd like to get each swatch vectors (ie : access the swatch groupItem). It's doable when clicking on the swatch panel and dragging the swatch on the document, or even double clicking the swatch in the swatches panel, I'd like to do it with javascript.
Â
how to access swatch patterns properties.
How to access the swatch properties, like when double clicking on the swatch in the swatches panel, how to "simulate" a drag & drop of the swatch to the document, I'll take it too, though I think it is not the most convenient way to do.
View 7 Replies
View Related
