AutoCad :: How To Get Windows Back While Making Hatch
Jul 20, 2010when I want to make a hatch and I type "H", the window doesn't appear, I only get some options on my command-line. How I can get this window back?
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: How To Get Hatch Patterns Back
Feb 24, 2012I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
View 7 Replies View RelatedAutoCad :: Sending Gradient Hatch To Back For Publish?
Oct 7, 2011I have a gradient hatch that using draw order i have sent to back and also tried to send behind other objects. I have tried using HPDRAWORDER (not quite sure what it does) but used values 0,1,2,3,4. the problem is when i plot the hatch, it comes to the front and i loose any lines going through the hatch. i have also used the send to back command while inserting the gradient hatch.Nothing Works.
How do i plot with the gradient hatch behind other objects?
AutoCAD Map 3D :: Making A Hatch Transparent
Oct 12, 2012We've set the transparency to a hatch to 90 and it still has a solid color. How can we make it transparent?
View 1 Replies View RelatedAutoCAD Map 3D :: Setting To Ensure That Hatch Windows Comes Up?
Mar 6, 2012I've just tried making a hatch, and notice that it no longer calls up the window that it used to call up in the older versions-- 2009 and earlier, for me.Is there a setting that I can set to ensure that the hatch window comes up?
I rarely use the default type/pattern name and scale settings, and I prefer to select my boundaries, instead of selecting a point within an area.
AutoCAD Architecture :: Modify Roofline Causes Surface Hatch To Cover Windows
May 27, 2013I am having a problem in an elevation view where the surface hatch covers the windows after I apply a Modify Roofline command in the construct.
When I look at the elevation in an isometric view you can see the surface hatch go through the windows. When I refresh the elevations after the construct xref is reloaded after Modify Roofline command the windows are no longer visible.
If I reset the modify roofline command in the construct, reload the xref in the elevation the elevation returns to normal.
I'd like to figure out why after the modify roofline command the windows are covered in the elevation but not in the construct view.
AutoCad 3D :: Windows In Tool Pallets Covered By Solid Hatch In Walls When Laying Out Floor Plan
Oct 3, 2013I've always layout my floor plans three dimensional with the tools pallets commands such as walls, rails, door, windows & ect. I always have my walls pre-hatched with the solid pattern which is really effective to the floor plan. Normally when I put windows in the wall the window is clearly shown without the hatch in the wall but for some reason my wall's hatch started covering the windows and I can't seem to solve this problem.
View 0 Replies View Related3ds Max :: How To Get Missing Windows Back
Feb 14, 2011I had the system setup on a dual monitor for a dog and pony in the conference room. I'm back at my desk and need to get my windows back to the monitor. My materials dialog, and my "warning isolated selection" windows are being displayed on a screen I don't have on now.
Is there a way to force all windows back to the current monitor?
using windows 7 32 bit 2011 max
Revit :: Move Horizontal Hatch Lines So They Align With Top Of Windows
Sep 7, 2013I want to move my horizontal hatch lines so they align with the top of my windows.
View 1 Replies View RelatedPhotoshop Elements :: 9.03 With Windows XP - Only Audio Portion Of Video Files Playing Back
Jan 22, 2013I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Entmake A Hatch Entity From A Hatch Template?
May 2, 2013I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
AutoCad :: Change Hatch From ANSI31 To GRAVEL Some Of Hatch Shows Outside Boundary
Aug 24, 2011I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
AutoCAD Visual LISP / AutoLISP :: Automatically Pick Up All Hatch And Solid Hatch Patterns
Aug 6, 2008I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies View RelatedAutoCAD 2010 :: Open Hatch Edit Dialog With Double Click On Existing Hatch?
Apr 17, 2010It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedAutoCAD 2013 :: Missing Hatch Patterns In Hatch Library?
Jan 2, 2013Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedAutoCAD .NET :: Block Reference Hatch - Deleting Loops Within A Hatch
Feb 22, 2013I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
AutoCAD LT :: Hatch Button Does Not Activate Hatch Dialog Box
Dec 17, 2011I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
AutoCad 2D :: Hatch Command To Match Existing Hatch
May 6, 2013I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedAutoCad :: Why Is Hatch Offset From What Want To Hatch
Feb 11, 2012Why is my hatch off set from what I want to hatch? I pic the points of the area in 3d i want to hatch but it ends up hatching out of the points i select?
View 5 Replies View RelatedAutoCAD LT :: How To Stop Drawings From Opening In Separate Windows Using Windows 7
Jan 10, 2012This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
AutoCAD Inventor :: Dwf Preview In Windows Explorer Windows 7 64?
Sep 8, 2011We can preview the DWF files in Windows Explorer with Windows XP but cannot seem to be able to with Windows 7 64.
View 7 Replies View RelatedAutoCAD LT :: Windows Limited / Restricted Account In Windows XP
May 17, 2013AutoCAD LT 2011 has been installed in a Windows XP computer.When logging into this computer using the Windows Administrator Account, all AutoCAD LT 2011 features are available.
But when logging into this same computer using the Windows Limited / Restricted Account, all AutoCAD LT 2011 features are missing.How can we get all the AutoCAD LT 2011 features back using the Windows Limited / Restricted Account?
Lightroom :: Why Can't Windows Explorer Show Thumbnail Previews Of DNG On Windows 8.1 64bit PC
Dec 2, 2013Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedAutoCad :: Getting A New Hatch Pattern
Dec 8, 2011I recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies View RelatedAutoCad :: Hatch Are Not Showing
Mar 5, 2012i have one of the drawing have hatch problem the problem is that my solid are not shown in print but other hatch are shown in printing only solid hatch are not showing i check fill command my fill is on and also check fill mode my fill mode is set to 1.
View 5 Replies View RelatedAutoCad :: Loading A New Hatch?
Apr 9, 2013My boss recently gave me a USB with a huge amount of hatches on it. The hatches are in .pat format. When I opened up AutoCAD (the version I have is AutoCAD Civil 3D 2011), and typed in "hatch" to have a look at the hatch creation properties box, I can't find where to load a hatch. I am also a bit confused as to where I should save all these new hatches so I can access them easily in the future.
View 9 Replies View RelatedAutoCAD LT :: Hatch Gap Tolerance
Apr 4, 2012How do you set the gap tolerance in Hatch command?
View 1 Replies View RelatedAutoCad :: Hatch Out Of Bounds
Jun 20, 2013When i hatch an area, i's fine, but when i match prop to another (witch is out of bounds) it goes out of bounds.
All of my hatches went out of bounds at some point.
AutoCad 2D :: How To Keep Hatch Always Behind Object
Nov 12, 2011I'm having a trouble with my hatches, every time I move an object contains a hatch, and some times when I re-open my DWG file, the hatch comes in front of the objects, is very annoying sending those hatches behind the objects all the time.
View 4 Replies View RelatedAutoCad :: Hatch Changes When Create PDF
Sep 30, 2011when I create a pdf from my drawing some of the hatches change (simple line hatches will have a heavier line). it is fine in the dwg.
View 1 Replies View RelatedAutoCad 2D :: How To Get Area From Hatch
Nov 30, 2013I have many Hatch pattern in my dwg. is there any LISP if i slect any Hatch then it will give me area in table
View 5 Replies View Related