I had the system setup on a dual monitor for a dog and pony in the conference room. I'm back at my desk and need to get my windows back to the monitor. My materials dialog, and my "warning isolated selection" windows are being displayed on a screen I don't have on now.
Is there a way to force all windows back to the current monitor?
I've downloaded gimp 2.6 recently and everything about it is great besides the fact that I dont have a layer box. I've tried all the tricks that people say, press ctrl + L or go to windows>recently closed docs.... When I tried recently closed docs it says empty.
[URL]
I downloaded it from ---> [URL]
When i open gimp up at the top of the window it says GNU image manipulation program.
When I open a .dwg file, 'Missing SHX Files' dialogue pops out. I checked the box 'Always perform my current choice', and clicked 'Ignore the missing SHX files...'. Then .dwg opened, but all text information were not displayed. I closed the .dwg, and reopen again, but this 'Missing SHX Files' does not pop out again.
How to get this 'Missing SHX Files' dialogue back?
Just a few days ago I had about twelve folders of photos in my Organizer. Now I have only two folders that have content. When I click on the other ten folders I see this message in the Media Browser, "No media to be displayed." Â I have both Adobe Premiere Elements 11 and Photoshop 11 which I got three weeks ago. The only thing new on my computer is the software that came with my Nikon camera - NX2 - a photo storage and photo editing program. My photos are still in my Windows Pictures program.
I imported 900 RAW images from my desktop into Lightroom, edited them, renamed the filename, and exported them into JPGs. Since I no longer needed the RAW images on my desktop I moved them over to an external hard drive. So now the images are still visible in my Lightroom catalog, but there is no photo to back it up since I moved the original files to the external hard drive. After realizing that I exported the images at 150 dpi instead of 300 dpi I need to re-export the images from lightroon at the proper resolution. But since I moved the originals to the external hard drive there is no photo to back it up in lightroom anymore. So I went to locate the files by clicking on the "?" but since I renamed the file when I exported them, the original filename on the external hard drive is now different from the filename in the catalog. Is the only solution to locate the file one by one? Is there any way I can do them all at once even though the original filename is different from the filename in my lightoom catalog? The original filename is still listed in the metadata, but since the originals are missing it can't change it back.Â
In Inventor 2013 the work and origin plane back color is missing or transparent on one of my workstations. Â The borders are present. Planes funtion normally.
I have tried different color schemes and have have edited the registry <workplanebackcolor> value , to no avail.
I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
I switched from CS3 to CS4 and realized that when I turn on the screen mode called "Full Screen with Menu Bar" it actually switches off the windows task bar. It is actually crucial to me, as I am really used to drag the document with a hand tool without boundaries, which was always achievable once pressing "F". In that mode, I could still use the taskbar to navigate to other windows (and see notifications from the taskbar). Now, in CS4, the combination of nice document dragging and taskbar is impossible.
I've just switched to a Mac from Windows, I'm using CS3 and in Photoshop on Windows there was an easy option in the Layers pallette where I could toggle through the blending options by using the down arrow key which also showed a live preview of the "blend".
I can't seem to activate this on the Mac version -
I am using 3ds Max 2009, and am starting to get a grasp of UVW unwrapping, however, for some odd reason the transform gizmo is hidden in the Edit UVW window, and I can't figure out how to unhide it. I tried pressing X, I tried pressing a bunch of other keys to see if maybe I accidently pressed a hotkey.
I have a client who is complaining that apostrophes, quotes and em dashes are missing from the interactive PDF I created from InDesign CC. The client is viewing the PDF on Windows 8. Â Punctuation is present when I view the same PDF file on my Windows 7 computer using Adobe 9 Pro and on my Mac using Preview.Is there something I'm missing when i export the InDesign file to PDF?if my client has to send out instructions for reseting his client's Adobe PDF Reader settings in order to have the file view correctly, it just won't work
I've installed CS6 (CS5 is still on the machine), and in the Bridge Menu, there is no longer a Batch menu item for initiating actions.In Bridge's Edit/Preference command, I have the Startup Scripts checked.There are no files in the "Startup Scripts" folder. Â I don't see a "Startup Scripts" folder in CS5, only in CS6.I can still do batch operations directly from Photoshop CS6's automate window, however, I like the ability in Bridge to select specific files on which to run the action.
I use Windows 7 Home Premium, and I recently installed VideoStudio Pro X6. After making a video file, I found that the file details that are usually visible within Windows Explorer were not present. For example, when making a video using older versions of VideoStudio Pro, Windows Explorer would display the file size, video length, frame width and height, frame rate, data rate, etc., but now with Pro X6 none of these details can be found. When right-clicking on the file in Windows Explorer to check the properties tab, all the fields reserved for these details are blank.
Is there a setting within Pro X6 that I am overlooking that enables the saving of these details again?
I am unable to minimize or close Photo Paint by mouseclick in W7. The program bar (is that how it is called?) is missing, so it is impossible to toggle between draw and photo paint. Coreldraw does show the program bar. Changing monitor resolution did not work, neither did  reinstalling. On another computer of mine, with W XP there is no problem.
When I search an autoCAD file from windows 7, it only shows me the backup file and missed the DWG file. I’m using Window 7 professional, service pack 1, 64-bit operating system; AutoCAD2012. Are there any way to change the seetings so I can see the DWG file?
Very new with this software...watched several videos, and I'm still confused. Went to send some pics to a friend last night, and noticed that many "folders" are not in the pictures library in Windows 7.  In LR4, some folders have a destination of C://users/eric and brenda/windows/pictures...which is great, but others have this destination C://Brandon(which is just the folder name).  how can I get the folders in the Windows Library?
I feel a new install of Windows 7 coming on. It is very strange why the Plot style manager has gone for a walk it may still be about but I can,t find it. Is it loaded with Autocad.Â
I have Lightroom installed on two Windows 7, 64bit systems. On one the top line above the File, Edit, Library... line is the expected; Lightroom 3 Catalog... at the left end and the three boxes on the right (minimize, maximize and Close). On my other system that line is missing. How to get it back?
The title just about says it all. I usually edit in Full Editor mode, but normally there is an Explorer-like ribbon running across the bottom, much like the one in Express Lab. I opened PSP ProX3 today and it was gone. I'm guessing it disappeared when i did some editing for my daughter in a non-standard (for me) mode.
How do I get it back? I swear I have hunted and even RTFM'd.
Coworker is setting up a new Win7 (64bit) machine but we don't have the ability to upgrade CAD at this time. So running AutoCAD Mechanical 2007. (Yes we know they don't always play nice) Two other workstations here are running the same  OS & CAD and print without issues. This new machine AutoCAD does not see any system printers. Have made sure the "Hide System Printers" is not checked under options. I can add a plotter file for each system printer and that workaround  is OK, but why this one machine can't see the system printers. They are Xerox workstations on the network - not local. We have already restarted AutoCAD and restarted the PC.
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008.  (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options  so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
AutoCAD LT 2011 has been installed in a Windows XP computer.When logging into this computer using the Windows Administrator Account, all AutoCAD LT 2011 features are available.
But when logging into this same computer using the Windows Limited / Restricted Account, all AutoCAD LT 2011 features are missing.How can we get all the AutoCAD LT 2011 features back using the Windows Limited / Restricted Account?