In Inventor 2013 the work and origin plane back color is missing or transparent on one of my workstations. The borders are present. Planes funtion normally.
I have tried different color schemes and have have edited the registry <workplanebackcolor> value , to no avail.
I also updated to SP2, just in case.
I have attached a screenshot of the origin axes.
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies View RelatedI use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test()
'reference to the transient geometry
Dim oTG As TransientGeometry
Set oTG = ThisApplication.TransientGeometry
'reference to the component definition
[code]........
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies View RelatedI having a stroke or something. I could swear I have used a work plane for a termination plane before in a Bolted Connection. Tried it just now and can't pick the work plane.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
Is there a way to turn off visibility on work planes using ilogic? Also, is there a way to change an extrusion type from an assymetrical extrusion to a one direction extrusion using ilogic?
Inventor 2013 Certified Professional
Error message 'Resize Work plane Failed'
it makes a copy of the Work Plane
that is not realy there and wont go away.
how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies View RelatedHow to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies View RelatedI created an Assembly-Constraint between two Work planes by creating a Geometry Proxy
CreateGeometryProxy(OriginWorkplane, TargetWorkPlanProxy)
Now, I want to look into the assembly Constraints and want to get the origin Work plane of the component. So, I now, it's the entity One of a specific Constraint I also now.
What I get is a Face Proxy (the EntityOne gives back a FaceProxy). But how can I get the Workplane, the Proxy Element once was created?
I can get the Surface Body the Work plane was created on, but I don't get the name of the Workplane. My target is, to get the name of the work plane.
Is there a method to add a work plane to a curved surface ? I need a construction plane adding to a curved surface to allow a sketch to to added to this plane, not sure if this is possible but the problem I have is adding a series of sketches to a curved surface to then extrude-cut for window openings.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
If you edit a section view sketch you can project model edges in the sketch and use them to constrain the section view line. However I cannot seem to project an included workplane to the sketch. For a particular application I really need to use a workplane because the model is actually a dummy that gets replaced by a vb macro. So any projected model edges will loose their reference.
I found out that I could use a sketch in the model to create the section view. In a model sketch it is possible to project work planes, so this looks like a good solution. However I do prefer the flexibility that you have when you use a drawing sketch.
How to use a work plane to constrain a section view, other then the model sketch method explained above.
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies View RelatedI have a vertically rectangular frame with internal frame elements at two separate levels based off offset work planes.
The lowest internal plane is offset up from the XZ plane and the highest internal plane is offset up from that lower plane. In hindsight I should have based that second plane also off of XZ, or off the height extents plane at the top of the rectangular box.
So that top third section of the box CAN be sized with a little math, but if I change the lower 2/3 of the rectangle it's going to want to follow that lowest internal plane (which I can tweak again to get what I want)...is there a way to just change the source of that higher internal planes source plane? Like switching it to XZ or the height extents?
I very often find that I would like to create a work plane defined by an axis and a point such that the plane is spanned by the point and the axis. But the only possible way seems to be to create a plane through the point and perpendicular to the axis.
View 9 Replies View RelatedHow to create a work plane, say, in the middle of solid while editing, to use the extend and contract commands using IV2014? I'd like to avoid using Fusion as an option if possible. This should really be an easy thing to pull off as many STLs are now available for 3D printing but simply need a quick stretch here and there to print accurately.
View 7 Replies View RelatedI`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
I am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies View RelatedCurrently using 2012 and I had the same problem in 2010.
When I turn visibility off and on in an assembly, all previously constructed user planes, axis and points become visible.
Is there a fix available to download?
How to set the visibility of workplanes in an assembly file to false.?
View 3 Replies View RelatedI have an ipart that will has the length and a quantity of patterned features controlled by a table. I've created a work plane that I'll be using when I take this part into an iassembly. The problem is that the features I used to create this work plane (midplane between two parallel planes) do not exist in (2) of the (3) members...so it gives me an error message. I've tried adding the work plane to the table, but 'exclude' isn't a drop-down (and typing it in doesn't work). How to make the work plane "inactive" for those particular members?
View 2 Replies View RelatedI have a strange problem in Inventor 2013:The back button has gone missing in some ribbon menus.. This Is a bug or a setting thats been changed?
View 5 Replies View RelatedI cant get a dimension to work in the vertical (Z) plane. i have a cube and can get dimensions to work properly in the x*y plane (horizontal) but when i try to dimension the vertical side autocad refuses to dimension anything vertical, all i get is a horizontal dimension of the distance between the 2 points i have selected vertically, set down on the horizontal plane. tried to get it to work in 3d workspace and also the 2d annotation & dimensioning workspace -no joy...
View 9 Replies View RelatedI am having a problem with some dimensions in a drawing. I have a 2D representation of my 3D model (using FLATSHOT) in my model space. I added the dimensions in a custom UCS and everything looks fine in paper space when looking at the TOP view but in model space I notice that the text is offset on the z-axis by a very large amount, like 7 meters large (I'm working in mm). How to fix the offset and get the text on the same plane as the line work?
View 6 Replies View RelatedIn AutoCAD Civil 3D 2012 when assigning the state plane coordinate system LA83-SF is missing from the Library. Although it is visible as a choice to select in the Available coordinate systems window when creating a Category.
View 8 Replies View RelatedI am trying to flip between Bylayer and color 150. If cecolor is bylayer set cecolor to 150 and if cecolor is 150 set cecolor to bylayer. It seems so simple but it's not working.
(defun c:22 ()
(setq cc (getvar "cecolor"))
(cond
((= cc "Bylayer") (setvar "cecolor" "150") )
((/= cc "Bylayer") (setvar "cecolor" "Bylayer") )
))
I have had AutoCAD LT for 3 months and it has been great. But all of a sudden it is not recognizing the shortcuts like "L" for line, and "M" for move.
Where did they go and how do I get them back?
When I open a .dwg file, 'Missing SHX Files' dialogue pops out. I checked the box 'Always perform my current choice', and clicked 'Ignore the missing SHX files...'. Then .dwg opened, but all text information were not displayed. I closed the .dwg, and reopen again, but this 'Missing SHX Files' does not pop out again.
How to get this 'Missing SHX Files' dialogue back?
See the attachment.
Untitled.png
I need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
Isn't there any way to create a floor or roof using a work plane as the level?
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.