AutoCAD Inventor :: Adding Work Plane To Non-linear Surface?
Oct 9, 2012
Is there a method to add a work plane to a curved surface ? I need a construction plane adding to a curved surface to allow a sketch to to added to this plane, not sure if this is possible but the problem I have is adding a series of sketches to a curved surface to then extrude-cut for window openings.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 8 Replies
ADVERTISEMENT
Sep 9, 2013
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
View 5 Replies
View Related
Aug 20, 2012
How to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies
View Related
Jul 13, 2013
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies
View Related
Sep 15, 2013
I need an intersection of the surface of a sphere and a plane, producing a circular line.
I do not know how to do that.
View 2 Replies
View Related
Oct 19, 2010
Any program to convert 3D solids to a mid plane surfaces? We need our models in this form to do FEA work on them. I wanted to ask this question before I took on the task of trying to create one myself.
View 9 Replies
View Related
Oct 2, 2012
I'm designing a part, and am having trouble creating a plane tangent to a curved surface. One option for creating a plane says "Tangent to Surface through Point", which in theory I should be able to use, but I can't figure out how to actually place a point there before in order to create a surface at the point.
Basically I am trying to cut a circle into the curved right side of the part
I've attached the part file for reference.
View 5 Replies
View Related
Dec 20, 2013
When I tried to make a sketch plane on one of the surfaces of the revolved feature, it only had the option to edit the original sketch or the feature even though the sketch that I'm trying to create is on a different plane. There is one surface that allows me to add a sketch plane.
View 5 Replies
View Related
Mar 30, 2012
when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies
View Related
Oct 31, 2013
I have the German version of Inventor 2014, so some translations may be different.
I want to project a text on a sketch onto a conical surface. The error message is that the chosen surface wasn't tangential to the profile plane. I found no way to rotate the plane.
How do I project my profile onto the conical surface or How do I make the profile plane tangential to the conical surface?
View 9 Replies
View Related
Apr 13, 2008
I use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test()
'reference to the transient geometry
Dim oTG As TransientGeometry
Set oTG = ThisApplication.TransientGeometry
'reference to the component definition
[code]........
View 5 Replies
View Related
Jan 9, 2012
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies
View Related
Mar 20, 2012
I having a stroke or something. I could swear I have used a work plane for a termination plane before in a Bolted Connection. Tried it just now and can't pick the work plane.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 2 Replies
View Related
Mar 23, 2012
Is there a way to turn off visibility on work planes using ilogic? Also, is there a way to change an extrusion type from an assymetrical extrusion to a one direction extrusion using ilogic?
Inventor 2013 Certified Professional
View 9 Replies
View Related
Dec 14, 2013
Error message 'Resize Work plane Failed'
it makes a copy of the Work Plane
that is not realy there and wont go away.
View 9 Replies
View Related
May 31, 2013
how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies
View Related
Jun 14, 2013
I created an Assembly-Constraint between two Work planes by creating a Geometry Proxy
CreateGeometryProxy(OriginWorkplane, TargetWorkPlanProxy)
Now, I want to look into the assembly Constraints and want to get the origin Work plane of the component. So, I now, it's the entity One of a specific Constraint I also now.
What I get is a Face Proxy (the EntityOne gives back a FaceProxy). But how can I get the Workplane, the Proxy Element once was created?
I can get the Surface Body the Work plane was created on, but I don't get the name of the Workplane. My target is, to get the name of the work plane.
View 4 Replies
View Related
Jul 2, 2013
If you edit a section view sketch you can project model edges in the sketch and use them to constrain the section view line. However I cannot seem to project an included workplane to the sketch. For a particular application I really need to use a workplane because the model is actually a dummy that gets replaced by a vb macro. So any projected model edges will loose their reference.
I found out that I could use a sketch in the model to create the section view. In a model sketch it is possible to project work planes, so this looks like a good solution. However I do prefer the flexibility that you have when you use a drawing sketch.
How to use a work plane to constrain a section view, other then the model sketch method explained above.
View 7 Replies
View Related
Jul 16, 2008
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies
View Related
Jan 9, 2014
I have a vertically rectangular frame with internal frame elements at two separate levels based off offset work planes.
The lowest internal plane is offset up from the XZ plane and the highest internal plane is offset up from that lower plane. In hindsight I should have based that second plane also off of XZ, or off the height extents plane at the top of the rectangular box.
So that top third section of the box CAN be sized with a little math, but if I change the lower 2/3 of the rectangle it's going to want to follow that lowest internal plane (which I can tweak again to get what I want)...is there a way to just change the source of that higher internal planes source plane? Like switching it to XZ or the height extents?
View 6 Replies
View Related
Sep 16, 2011
I very often find that I would like to create a work plane defined by an axis and a point such that the plane is spanned by the point and the axis. But the only possible way seems to be to create a plane through the point and perpendicular to the axis.
View 9 Replies
View Related
May 9, 2013
In Inventor 2013 the work and origin plane back color is missing or transparent on one of my workstations. The borders are present. Planes funtion normally.
I have tried different color schemes and have have edited the registry <workplanebackcolor> value , to no avail.
I also updated to SP2, just in case.
I have attached a screenshot of the origin axes.
View 7 Replies
View Related
Aug 1, 2013
How to create a work plane, say, in the middle of solid while editing, to use the extend and contract commands using IV2014? I'd like to avoid using Fusion as an option if possible. This should really be an easy thing to pull off as many STLs are now available for 3D printing but simply need a quick stretch here and there to print accurately.
View 7 Replies
View Related
Feb 10, 2012
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
View 3 Replies
View Related
Aug 29, 2013
I am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies
View Related
Dec 17, 2012
Currently using 2012 and I had the same problem in 2010.
When I turn visibility off and on in an assembly, all previously constructed user planes, axis and points become visible.
Is there a fix available to download?
View 7 Replies
View Related
Jul 19, 2013
How to set the visibility of workplanes in an assembly file to false.?
View 3 Replies
View Related
Apr 4, 2013
I have an ipart that will has the length and a quantity of patterned features controlled by a table. I've created a work plane that I'll be using when I take this part into an iassembly. The problem is that the features I used to create this work plane (midplane between two parallel planes) do not exist in (2) of the (3) members...so it gives me an error message. I've tried adding the work plane to the table, but 'exclude' isn't a drop-down (and typing it in doesn't work). How to make the work plane "inactive" for those particular members?
View 2 Replies
View Related
Jul 31, 2011
Polar Stretch and Linear Stretch work properly independently, but when their "grip points" are overlayed and I'm trying to stretch the right side and stretch and rotate the bottom side of the drawing - Polar Stretch is screwing up.
The idea is to NOT to use them separately, but with one stroke having "grip points" overlayed all the time.
View 0 Replies
View Related
Aug 1, 2013
How to delete a work surface. These work surfaces were imported from an iges file which contains thousands of work surfaces. They are not associated with a part feature which can be deleted. I've developed a routine to sort through these and identify unwanted work surfaces based on their positions. The best I've been able to come up with is to make them invisible, but I'd really like to delete them completely to clean up the file. I did try to loop through and delete any surface body objects associated with the work surface but that failed.
View 8 Replies
View Related
Apr 24, 2013
I have a complex surface that consists of many patches. I need to place a work axis perpendicular to one of the patches on the surface of the cheek. It could be on the interior of the patch or it could be at one of the vertices of the patch.
View 6 Replies
View Related
