AutoCad 2D :: How To Fix Offset And Get Text On Same Plane As Line Work
Jan 9, 2013
I am having a problem with some dimensions in a drawing. I have a 2D representation of my 3D model (using FLATSHOT) in my model space. I added the dimensions in a custom UCS and everything looks fine in paper space when looking at the TOP view but in model space I notice that the text is offset on the z-axis by a very large amount, like 7 meters large (I'm working in mm). How to fix the offset and get the text on the same plane as the line work?
View 6 Replies
ADVERTISEMENT
Jan 9, 2014
I have a vertically rectangular frame with internal frame elements at two separate levels based off offset work planes.
The lowest internal plane is offset up from the XZ plane and the highest internal plane is offset up from that lower plane. In hindsight I should have based that second plane also off of XZ, or off the height extents plane at the top of the rectangular box.
So that top third section of the box CAN be sized with a little math, but if I change the lower 2/3 of the rectangle it's going to want to follow that lowest internal plane (which I can tweak again to get what I want)...is there a way to just change the source of that higher internal planes source plane? Like switching it to XZ or the height extents?
View 6 Replies
View Related
Jul 13, 2013
How to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies
View Related
Jun 7, 2013
I need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies
View Related
May 6, 2013
I am a beginner at LISP and this is a bit out of my league... and I'm trying to create a lisp where I can draw a polyline between 2 points that also places text with the actual distance offset above the line.
I did find this post and I'm not quite catching on.. [URL] ......
View 9 Replies
View Related
Dec 10, 2012
How do I modify the leader for station and offset labels to underline the top line of text?
View 3 Replies
View Related
Jan 1, 2012
I drew the first sketch. i want to insert an offset plane. i use the plane tool, mark 2 sketch entities and a plane is formed. i move it, but it moves only on the plane of the sketch, the dialog box for the distance doesn't appear.
View 3 Replies
View Related
Jun 22, 2012
All previous releases of Inventor before 2013 would display the name of the parameter that controls the offset value of a plane. While editing an offset plane you could see the name either in the title of the pop up or by holding your cursor over the parameter value. In release 2013 I have been unable to find the parameter name anywhere when editing the plane. I have a lot of equations in my models. Being able to track down bugs is difficult enough without not knowing what parameter I'm looking at.
Is there a setting I need to turn on/off to get the parameter name to display again?
View 3 Replies
View Related
May 17, 2013
I would like to be able to offset a 3D Sketch in a direction normal to a plane. In the attached image, I have drawn in an orange color the direction I would like the 3DSketch to offset.The white line is where the new sketch would be.
The yellow surface is the 3dsketch extend to a plane
There might be some tools in Inventor that will do what I am trying, but I have not found it yet. I have tried extend surface, but that will not take it the direction I want.
View 6 Replies
View Related
Sep 9, 2013
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
View 5 Replies
View Related
Sep 14, 2011
in autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies
View Related
Mar 30, 2012
when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies
View Related
Mar 10, 2012
I cant get a dimension to work in the vertical (Z) plane. i have a cube and can get dimensions to work properly in the x*y plane (horizontal) but when i try to dimension the vertical side autocad refuses to dimension anything vertical, all i get is a horizontal dimension of the distance between the 2 points i have selected vertically, set down on the horizontal plane. tried to get it to work in 3d workspace and also the 2d annotation & dimensioning workspace -no joy...
View 9 Replies
View Related
Sep 27, 2012
For some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies
View Related
Apr 13, 2008
I use AddByNormalToCurve method to create a work plane in a sketch 3D. Is it possible to make new workplane object to be consumed by the parent Sketch3D (Workplane.Consumed = True) as it is possible in UI in Edit mode ?
My sample code in IV 2008:
Public Sub WorkPlane_Test()
'reference to the transient geometry
Dim oTG As TransientGeometry
Set oTG = ThisApplication.TransientGeometry
'reference to the component definition
[code]........
View 5 Replies
View Related
Jan 9, 2012
I have a part file with work plane on it (visibility option is checked). When I put it on assembly file, the work plane is disappeared.The part file is on attachment.
View 3 Replies
View Related
Mar 20, 2012
I having a stroke or something. I could swear I have used a work plane for a termination plane before in a Bolted Connection. Tried it just now and can't pick the work plane.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 2 Replies
View Related
Mar 23, 2012
Is there a way to turn off visibility on work planes using ilogic? Also, is there a way to change an extrusion type from an assymetrical extrusion to a one direction extrusion using ilogic?
Inventor 2013 Certified Professional
View 9 Replies
View Related
Dec 14, 2013
Error message 'Resize Work plane Failed'
it makes a copy of the Work Plane
that is not realy there and wont go away.
View 9 Replies
View Related
May 31, 2013
how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies
View Related
Aug 20, 2012
How to create a work plane that is perpendicular to a surface? I'm trying to do this so that I can "split" the object into two separate entities where the plane is.
View 9 Replies
View Related
Jun 14, 2013
I created an Assembly-Constraint between two Work planes by creating a Geometry Proxy
CreateGeometryProxy(OriginWorkplane, TargetWorkPlanProxy)
Now, I want to look into the assembly Constraints and want to get the origin Work plane of the component. So, I now, it's the entity One of a specific Constraint I also now.
What I get is a Face Proxy (the EntityOne gives back a FaceProxy). But how can I get the Workplane, the Proxy Element once was created?
I can get the Surface Body the Work plane was created on, but I don't get the name of the Workplane. My target is, to get the name of the work plane.
View 4 Replies
View Related
Oct 9, 2012
Is there a method to add a work plane to a curved surface ? I need a construction plane adding to a curved surface to allow a sketch to to added to this plane, not sure if this is possible but the problem I have is adding a series of sketches to a curved surface to then extrude-cut for window openings.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 8 Replies
View Related
Jul 2, 2013
If you edit a section view sketch you can project model edges in the sketch and use them to constrain the section view line. However I cannot seem to project an included workplane to the sketch. For a particular application I really need to use a workplane because the model is actually a dummy that gets replaced by a vb macro. So any projected model edges will loose their reference.
I found out that I could use a sketch in the model to create the section view. In a model sketch it is possible to project work planes, so this looks like a good solution. However I do prefer the flexibility that you have when you use a drawing sketch.
How to use a work plane to constrain a section view, other then the model sketch method explained above.
View 7 Replies
View Related
Jul 16, 2008
I have an assembly that was generated by Pro/E. It opens fine, but there are roughly 1000+ planes that are all visible. Is there a way to easily shut these all off whithout having to do it in each part?
View 4 Replies
View Related
Sep 16, 2011
I very often find that I would like to create a work plane defined by an axis and a point such that the plane is spanned by the point and the axis. But the only possible way seems to be to create a plane through the point and perpendicular to the axis.
View 9 Replies
View Related
May 9, 2013
In Inventor 2013 the work and origin plane back color is missing or transparent on one of my workstations. The borders are present. Planes funtion normally.
I have tried different color schemes and have have edited the registry <workplanebackcolor> value , to no avail.
I also updated to SP2, just in case.
I have attached a screenshot of the origin axes.
View 7 Replies
View Related
Aug 1, 2013
How to create a work plane, say, in the middle of solid while editing, to use the extend and contract commands using IV2014? I'd like to avoid using Fusion as an option if possible. This should really be an easy thing to pull off as many STLs are now available for 3D printing but simply need a quick stretch here and there to print accurately.
View 7 Replies
View Related
Feb 10, 2012
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
View 3 Replies
View Related
Aug 29, 2013
I am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies
View Related
Dec 17, 2012
Currently using 2012 and I had the same problem in 2010.
When I turn visibility off and on in an assembly, all previously constructed user planes, axis and points become visible.
Is there a fix available to download?
View 7 Replies
View Related
