Maya :: 2014 Animation Windows Missing?
Dec 27, 2013
1. I click on Maya to open. Icon bounces and loads.
2. Maya loading window appears.
3. Maya finishes loading and 1 minute startup movies appears.
4. Menu bar for Maya appears at top of screen.
5. Nothing else appears.
6. See attached pic. Notice the menus bar at top and no animation windows on desktop
TROUBLESHOOTING I HAVE TRIED:
1. I reinstalled Maya 2014 with SP3 and reactivated the licensing.
2. Restarted computer several times.
3. Tried opening old scenes.
4. Tried opening new
COMPUTER INFO:
MacBook Pro 15 Inch 1TB flash harddrive with turbo boost to 3.8.
SOFTWARE INFO:
Running Maya 2014 SP3 package.
View 1 Replies
ADVERTISEMENT
Feb 26, 2014
I have installed Maya 2014 SP4 at home, this is a fresh install and was just trying to see if there are any problems with the new SP before I install it at work.
But for some reason, the install went OK, but when I looked under the Render settings there is no MentalRay, and then looking in the Plugins list, there are none there either?
View 1 Replies
View Related
Nov 6, 2013
Previously in 2013, you were able to identify you clip ghost joint set and your master controller separately. HOWEVER, in maya 2014 there is only one option and that is "Set Ghost Clip Root". This works on HIK IF and only if you select the root FK controler, yet I've not been able to get it to work if I'm using a custom rig as the joint is driven by a transform (i.e. a nurbs curve). , using a reference character seems out of the question with anything related to trax and clip sequencing if you want to use the ghosting options.
View 3 Replies
View Related
Jun 18, 2013
What's up with the Show Manipulator Tool in Maya 2014? On my system, the tool is not showing up in the toolbar. There's just a blank spot where the icon used to be. The tool is still accessible via the General Shelf.
View 4 Replies
View Related
Aug 20, 2013
I can only make joints for Maya muscle on the default grid, they seem to snap on grid.
View 1 Replies
View Related
May 8, 2013
I just loaded the bonus tools for 2014 Mac....I looked in the plug-in manager and the .3ds plug-in is missing in action...
View 7 Replies
View Related
Feb 17, 2011
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies
View Related
Apr 18, 2013
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies
View Related
Jan 20, 2011
I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
View 4 Replies
View Related
Dec 11, 2010
I have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
View 2 Replies
View Related
Oct 10, 2012
I am trying to add an expression to the standard Mudbox car to make the wheels turn when the vehicle moves in both the X & Z dimension. I have found many scripts that let me do this in a single dimension. I have found some others that claim to work for both dimensions, but at certain angles the wheels turn in the wrong direction.
My work flow is as follows:
1 - Export car from Mudbox to Maya
2 - Separate the wheels & center pivot all items
3 - Add NurbsCurves to create a rig
4 - Parenting the elements of the car
5 - Add an expression based on this web post [URL].......
6 - Test the animation
It works great when translating the car in the Z axis, but when the car is rotated 95 degrees in the Y axis the wheel will only go backwards no matter which direction the car is moved.
I have attached an MB (Maya 2013) so you can see the
problem.mudboxcar_maya_2plusexpression.mb.zip
View 7 Replies
View Related
Mar 6, 2012
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
View 1 Replies
View Related
Apr 3, 2011
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
View 2 Replies
View Related
Oct 23, 2012
I have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
View 1 Replies
View Related
Dec 22, 2010
For some scenes we have a chain which is wrapped around several cogs, just like a bicycle. In this scenario we need the chain links to follow the path and retain their relationship to each other.
In other scenes we have a chain which follows along a changing path. Imagine this if you can: A heavy weight has a chain attached which goes vertically up, over a pulley and down the other side where it is attached to a lorry. The lorry drives off pulling the weight upwards. This is my challenge!
Should I individually constrain the links using a Pin constraint and use dynamics completely to keep the chain taught?
View 1 Replies
View Related
Nov 29, 2010
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
View 3 Replies
View Related
Jan 20, 2011
I have made a 3d Spectrum analyser , its made of rectangular boxes 16 rows and 16 boxes in each row.
So i have made my cam from Bottom Left corner to Top Right over 96 Frames.
What i need to do, is make some of the blocks disappear and re appear as the cam pans across.
In sketchup i did it by HIDEING the component (block), make new scene, then un hide it..
View 1 Replies
View Related
Dec 29, 2010
I want to key frame animate something to go in a straight line but it seems to start out slowly, speed up, and then slow down again at the end. Is there a way to make it so the object moves the same speed throughout?
View 1 Replies
View Related
Aug 16, 2010
I have an animation layer that I have exported and Im trying to import it into a new file and then merge it down to the base layer.
what ends up happening is that when I do the merge i get two additional layers. and the layer with the animation stays there. and nothing gets baked. the animation stays in the imported layer.
I should be able to import/export animation layers right?
[URL]........
View 1 Replies
View Related
Jan 5, 2012
I have a image plane. I would like to move the image of the plane in animation. It looks out then masking. I need only some parts of the image in frame one, and I need other parts of the image on frame 100. The plane isn't moving, only the image is moving in the box.
View 2 Replies
View Related
May 23, 2011
I am working on a school assignment where we are to use mocap for character animation...well av gone that far but, now I need to edit the animation to fit better in my animation......below is a playblast of what I have now..i need to have my characters holding onto the broom....
[URL].......
heres also a screenshot.
Using Maya 20121 and Motionbuilder 2012
View 3 Replies
View Related
Mar 23, 2011
I've been working on an animation for a week or two and all of the sudden the file no longer plays the animation. The keyframes are there and I can scrub through them, but when I hit play it just hangs on the frame it's already on, it says it's playing (The icon changes to stop and in the corner it says "Hit ESC to stop playing", but nothing moves. I can bring it into older versions of Maya and it plays, but the only other version of Maya I have is 2008 and it doesn't like the transfer from 2011 to 2008.
View 2 Replies
View Related
Nov 30, 2011
i'm actually starting to design and code the animation part of the pipeline for my studio. So if you have a given shot in a given version, you have a bunch of animations for all characters/props, and you can publish a version of your animation and rollback your animation to older versions.I have two kinds animations exported : one "normal" and a geocache version also. For the geocache, I use Alembic and for the moment I'm pretty happy with the results.
For the "normal" version, i was thinking of using animImportExport module from maya. It seems to work fine, but then comes THE issue I remember having to discuss for hours in all the studios I've worked : what about the constraints?i have my character, for example Ogre_chr (group node) and i export all anim below that node and call it Ogre_chr_Shot101_v01.anim. But if there's a constraint outside the ogre, it won't be exported. I could take the anim of the object that is constraining and add it to my .anim, but imagine two characters interact with one same constraint : saving versions of both characters will cause issues when you play around with loading different versions of both characters.
View 9 Replies
View Related
Nov 23, 2010
how to create a vacuum sucking animation?
What I need to do is suck little strands of something I made into/thru a hollow a needle.
View 1 Replies
View Related
Feb 4, 2014
When I key the arm on frame 1 for instance, then key the hip they both appear on the same frame, meaning if I copy the arm to frame 20, it copies the hip too.Or if I want to adjust the arm on frame 10 it also adjusts the hip (and all the other frames in the scene.)Making it practically impossible to tween anything at all because it's all lumped together.
I deleted my entire walk cycle and started over again, reset the options to default, reloaded Maya... and it's still happening but only in this scene.
View 1 Replies
View Related
Sep 23, 2011
As I am setting the driven successfully in Maya 2011, and when i am animating the driven controller by using the attribute, the animnation is snapping to the default driven value, to max. driven value, and to min. driven value, So, i can't the see the in-betweeings between to keys.
View 2 Replies
View Related
Jul 18, 2013
I am about to start work on a project that will require me to import between 200-300 CAD models created with Solidworks I believe and provided to me in the following formats:
.STEP
.STL
.IGS
.SLDPRT
with most of the files being in .STEP and .SLDPRT format.
What is the best way to import these into maya 2014 OSX?
View 6 Replies
View Related
Jun 21, 2013
I'm trying to import dxf and dwg files into Maya 2014 on my Mac, but Maya crashes everytime.Direct connect bundle is loaded.
View 2 Replies
View Related
May 6, 2013
Are reflections supported in Viewport 2.0 in Maya 2014? I mean direct reflections, not mapped ..
View 1 Replies
View Related
May 19, 2013
So since I have had 2014 installed grease pencil only worked once and I have not changed anything. It just worked all of a sudden one start up, but prior to that and since it has not worked at all. Everything opens (the menu) and when I add a frame and select a brush that all works, but when using the mouse or Wacom tab it will not paint anything. I even upgraded to the latest drivers for the Wacom, but like I said the mouse wont work either.
View 4 Replies
View Related
Sep 25, 2013
Autocad crashes frequenlty. Especially when making a pdf.
View 7 Replies
View Related
