i recently upgraded from 2006 to 2008, and am having a strange problem. when i open anything such as the xref manager or quick select window, i resize the window and the next time i open it, back to the default size and position.
View 9 Replies
change the default position the Text Format box opens in when double clicking on text to open the editor?
I have downloaded a list of system variables but have been unable to identify a system variable to control the location of the Text Format box.
Every time I double click on text to open the text editor the Text Format box opens directly on top of the text forcing me to drag the Text Format box out of the way to be able to see what I'm typing as I edit the text.
Some one in our office pointed out that the Text Format box is defaulting to open in the center of the screen and that if I want to avoid the conflict I should zoom or pan to a point where the text I wat to edit is not in the center of the screen. This is a major PITA that requires significant retraining as I ALWAYS zooom and pan to place what I am editing in the center of the screen. Twenty two years of AutoCAD use creates habits that are difficult to alter. I would think most people would do this by default and having the Text Format box default to opening in the center of the screen was a rather shortsighted choice by the programmer.
Shouldn't the placement of the Text Format box be relative to the location of the text chosen for editing, say above or below on the screen rather than defaulting to a set location?
Somehow I got the ribbon vertical in autocad architecture 2010 I don't know how I did it nor how to get back at default horizontal position
View 7 Replies View RelatedIs there a way to position the Filetabs from the default location on the top of the graphic screen to the bottom where the sheet tabs are?
View 1 Replies View Relatedjust upgraded from 2004 to 2012. Wow, sure looks different.I'm playing around with the ribbon & don't know how to stop an annoying behavior. I position the ribbon locked to the side of my display because I have a wide screen & if docked to the top I end up with a very wide, skinny drawing area. when ever I make a change tp the ribbon contents it goes back to the default top position, after which I have to relocate it again. Is there a way to get it to remember the previous position of the ribbon?
View 3 Replies View RelatedI have re-arrange the Properties and Project browser from their original position, I cannot figure out how to put them back in their default position , I'm having hard time navigating thru my project because of this mess.
See the attached picture.
I am trying to enlarge the text from an exported cad drawing from Dialux (lighting calculation software)...it has exported a field of values over a large area but the text is really small and illegible when its plotted as an A1 pdf
Is there anyway to blow all the text values up at once without moving them from their positions with relation to the boundaries of the roads and buildings? Here is a screenshot of the view with CAD...this is a small area of the entire scheme and those little black smudges are the numbers i need to scale
CAD Screenshot.jpg
I guess in a 3D program this would be equivalent to having the pivot point located in the centre of each set of numbers so you could scale them using the centre of each number as its scale point but I am stumped by how to do this in Autocad Architecture 2011..
When in CS6 I want to be able to move my image where ever I want it, by default it's centered on the workspace. Because my palettes are on the right and I use quit a bit of them it's better when I can move the image moire to the left.
View 7 Replies View RelatedI'm not sure if I've missed a setting or gradients are behaving differently in AI CC.
After filling a shape with a gradient fill and then modifying it's angle/position/size with the Gradient Tool (G)... then going to create a new shape, I want to reset the gradient back to the default angle/position/size. Usually I'd just click/double-click on the gradient I was using in the Swatches panel and it would reset. However this isn't working anymore.
I was wondering if I've missed a setting to make this possible
How do you get window size and position incorporated into Photoshop CC workspaces?
View 3 Replies View RelatedIn AI CS5 the size and position of an image were displayed in the top toolbar when you selected the image. This is missing in AI CS6, how can I get it back?
View 2 Replies View RelatedI have a question, quite a tricky one. Is there any way how can I copy and paste position and size of two objects?
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Something like copy + paste in place with a different logics. I hope You understand what I want.
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
how can I copy and paste position and size of two objects?
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Something like copy + paste in place with a different logics. I hope You understand what I want.
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
When I open a new file in AutoCAD 2011 the size is 1:100 how can I change it to 1:1 ?
View 4 Replies View RelatedI need to "Programatically", using Visual Studio, set the default printers paper size to either "A4" or "A3".
I have the following code that gets the required paper size ("A4" or "A3") from the registry and checks that the default printer supports "A3". If it does I want to set the paper size to "A3".
Here is my code so far.
Imports Microsoft.Win32
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SetPaperSize As String
Dim PrinterPaperSize As String
SetPaperSize = My.Computer.Registry.GetValue("HKEY_CURRENT_USERSoftwareMechTools", "Printer Paper Size", "0")
For Counter = 0 To PrintDialog1.PrinterSettings.PaperSizes.Count
PrinterPaperSize = PrintDialog1.PrinterSettings.PaperSizes.Item(Counter).PaperName
If PrinterPaperSize = SetPaperSize Then
' MsgBox(SetPaperSize) HERE IS WHERE I NEED THE CODE TO SET THE PAPER SIZE
Exit For
End If
Next
End
End Sub
End Class
Somewhere in Inventor to override the default size when creating holes? I need to change the size of 3 mm to 4.2 mm.
View 1 Replies View RelatedI recently added a second screen to my desktop and noticed that when I File Open in 2010, the box is always the small default size even after I change it numerous times. I use Display Fusion to manage the two screens but that is not the issue as this still occurs when I turn it off.
View 3 Replies View RelatedIs there a way to make the default size of a chamfer 1/16"?
View 2 Replies View RelatedI'm using AutoCAD Architecture 2012 and Windows 7 Professional x64. Is there a way to change the default sizes of various dialog boxes? When I use the File Open dialog box, for example, I always want it to be bigger so I drag the corner to enlarge it, but the next time I call it it's back to the same default size. Can I drag it to a new size and make that stick, a variable set differently perhaps, or is something more sophisticated involved?
View 1 Replies View RelatedIs there a way to set the default text size when using mtext with an annotative text style?
I have an annotative text style I use for everything. I have the height set to 0 in the style. In MTEXT the height always defaults to 1/4" which I never use. Is there a way to make it default to 1/8" text? It is annoying to have to have to change it every single time I use mtext.
The height is usually the paper text height but sometimes within a viewport the height is the model space height instead of the paper height. I don't know why it is different in some viewports but I would like to have it consistant.
I am using Inventor professional 2014.
I heard that in this version,
a drawing printing can now be saved so that each time I have a format A to print, it prints format A by default.
Each time I have a format B to print, it prints format B by default.
Now, if i have a drawing format A and another drawing format B to print, i have to change the format prining page each time.
I am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies View RelatedIs there a way to default to a standard hole size when starting a new part? ie. If you mostly place 10mm dia holes can this size be configured to be default in lieu of 3mm on the hole dialogue box.
View 5 Replies View RelatedIs it possible to change the default size of the block circle of the multileader and also the text size and style? If so how do I do it?
View 4 Replies View Relatedhow can I change the default arrowhead size from 3/32 to 5/32... I am able to change it from the palettes only after I insert it.
I would like to have all leaders of all styles match the same style far as arrowhead size... multi-leaders are defaulted as 5/32 and after using them forwe like them this size verses the 3/32 size of the quick leader.
Now I'm going to write a code that will change current plot device of the drawing and there isn't a problem here:
acPlSetVdr.SetPlotConfigurationName(acPlSet, newPrinter, "A4");
But how can I leave default paper size not "A4"? For example if there is "A3" it should stay "A3". Because if I go through each drawing I don't know what is the current paper size I just need to change the plot device becuse default has been crashed for example. But if I write "A4" each drawing will have "A4".
Having problems with the updated new file dialog and I'm not talking personal problems. I switched it to detail view and widened up the name column so I could see the whole name. I could actually live with that setup however the next time I opened the new file dialog all the columns returned to their default size and the sort also reverted.
Is it just me or does the new file dialog not remember any changes to it's layout?
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
File > New.The first preset option is: "Default Photoshop Size".. I get a really odd size of 454 x 340 pixels.
View 10 Replies View Relatedwhy 25.5 by 33 inches has become the default page size in Draw? It's set at letter but the ruler shows otherwise and the snapping function is totally gone.
This happened yesterday as I was creating a custom document- I wound up uninstalling the whole suite and reinstalling today and within half an hour it happened. (after editing a bitmap from within Draw).
