Trying to create an insulation batting line (15 centimeters wide), in the model it looks okay (actually it goes a tiny little bit beyond the borders, but it is good enough for me at this stage). In the viewports however it is much wider (I would say, it is 10-15 times wider than expected).
My setup:
LTSCALE - 1.0
CELTSCALE - 1.0
MSLTSCALE - 1.0
I'm more or less happy with annotation scaling, apart from the mysterious hatching problems that are not the issue of this message.
But there is a major annotative scaling issue with batting / insulation lines. Insulation lines should NOT change with annotative scaling ! A 4" insulation layer shouldn't become 16" just because i'm printing in bigger scale !
I have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
View 9 Replies View RelatedWe have a number of layers pre-set up to display the batting linetype at various scales:-
However when printing a "25mm" thick version of the batting linetype drawing it prints as a straight line. Our other scales are fine.
The linetype views correctly in model and paper space just not when printing.
When doing batting insulation is there anyway to define its dimensions? For example, i want the width to be 150mm from center, making it 300mm thick
I know i can adjust the size view of it with the annotation scale, but i would like to be able to define and exact dimension instead, not the scale. This would be useful when drawing wall detail.
We inherited an AutoCAD DWG for a project and were plagued with the warning about missing SHX files every time the file opened. We could not obtain the SHX file, so ran the purge LISP routine from here [URL]
Now, we don't get the warning any more, but the insulation batting (and several other styles) that previously displayed correctly now just display as a a row of dots.
I have received a drg that when you look at the viewport in layout, all the line colors have changed to white, but in model space they are their designated colors by layer.
View 2 Replies View RelatedIn model space all of my linetypes (for all me various details)look correct, however after creating multiple Viewports within a new layout, and scaling them appropriately the line thickness of each viewport look very thick. To the point where dimensions and notes are unreadable. But when I plot, everything is ok. It appears as though everything has been drawn with a very thick polyline. What causes this?
View 3 Replies View RelatedI have problem in one outside drawing in my office. in layout there are many viewport but viewport border line not appear.
I make all layer ON and unfreeze and unlock also viewport border not shown. Is there any option.
how could i draw any viewport's border line in layouts, if i do not want to use predefined rectangle,
View 9 Replies View RelatedAm trying to use millimeters for the first time. In model space, I set UNITS to millimeters. I draw a 5 unit line. No problem. I go to a layout tab and the viewport shows a 5" line, using a 1:1 scale. How do I make the viewport show a true 5mm line? If I choose inches as my units, the viewport scale is true 1:1 scale
View 7 Replies View RelatedCan I modify an existing viewport in a macro or in the command line?
Using a macro, I want to modify (specifically delete) the viewport from a layout tab after chspace from model space.
I have LT so no LISP. qselect works but cannot be put into a macro.
If I "select all" on a layout tab in paperspace ACAD says 1 of the objects selected is the viewport so I know autocad recognizes the viewport as a different kind of object.
For some reason my line type is not showing up properly in my viewport. In model space my lines are dotted, but when I go to viewport they show up continuous??
View 6 Replies View RelatedWe are using Civil 3D 2010, Version 4.1 and it is being used on both WinXP and Win7.
This is an issue that has been coming up at different times with profile views and them shifting when viewed from our viewports in our layout tab. It looks correct in the model space. But it shifts to the right 10' in the layout tab. We have 7 tabs in this drawing. I have looked through all of the profile view settings and it does not seem like any of these are the issue. I created a new viewport in the same tab and received the same shift to the right. I then created a new tab in the same drawing (not copied from the one that has the issue), created a new viewport, and the shift is not there. The PSLTSCALE, MSLTSCALE, and LTSCALE are all set to 1 in all of th tabs.
Woudl there be a layout tab setting that is causing this? This is happening on all of our machines with this drawing so I know it is not a specific user/machine issue. I have attached a .pdf showing the three cases described above if that were to provide any additional insight.
I use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
I created view frames and sheets for a number of alignments. Is there a way to turn off a match line not associated with the main alignment for a particular viewport.
Or did I missed a setting somewhere that should turn this off automatically?
It appears various people are posting things that are posted in the Readme. For Nitrous these are:
• To prevent issues with Nitrous, ensure you have the most up‐to‐date system drivers. For specific details, see the sections about 3ds Max 2012 / 3ds Max Design 2012 found at URL....
• Applying Unwrap UVW after painting in 2D with Viewport Canvas and painting on top of the Unwrap UVW can sometimes cause 2D paint to fail.
Workaround: If this occurs, apply an Edit Poly modifier on top of the Unwrap UVW modifier.
• Civil View parameters can cause a program error when modifying surface parameters.
• Object Color display will show the object’s material color when set to object color.
Workaround: Enable Use Environment Background and Display Background in the Viewport Background settings (Alt+B).
• Locking the computer can cause the viewports to stop responding in some cases.
Workaround: If this occurs, restart the program.
• Mirrored or negatively scaled objects might display face edges incorrectly.
• The Soft selection Shade Face Toggle does not always properly display the shaded faces.
• MassFX constraints can cause Dummy objects not to display in Realistic mode.
• Body Objects display tessellated/triangulated edges instead of the proper Body curves.
• Back faces display as transparent.
• Hidden Line style does not display texture maps in the viewport.
• Tone Mapper used with a Skylight set to use the mr Physical Sky environment will display a black background when enabled.
• Enable Gamma/LUT Correction does not work on stylized viewports.
• Very large textures (10K x 10K) can cause a program error. Workaround: You can control texture sizes with MAXScript:
NitrousGraphicsManager.SetTextureSizeLimit 512 true
NitrousGraphicsManager.SetBackgroundTextureSizeLimit 1024 true
Or by modifying the following keys in 3dsmax.ini:
ViewportTextureSizeLimitEnabled=1
ViewportTextureSizeLimit=512
ViewportBackgroundTextureSizeLimitEnabled=1
You need to restart 3ds Max after making these changes.-Eric
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedHow do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedProblem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies View RelatedI am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies View RelatedI did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
how do you create a viewport within an existing viewport ?
View 9 Replies View RelatedI'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View Related