I use Autocad 2013. When I turn on the Sun and Sky Background, the spotlights automatically turns off? This happens every time and the render is awful... Bright windows, no light in the room And the opposite: When I turn off the Sun and Sky Background everything is ok. But the windows are dark....
View 9 RepliesAnytime I draw a sketch the surface of the part highlights to a red color. It is hurting my eyes and how to switch it off.
I am using a new 2012 .
If my SNAP is turned OFF it automatically turns itself ON when i draw some linework. It keeps doing this in certain 2D only cad files. As a temporary fix i have tried to set my snap spacing to .0001 to keep the crosshairs running smoothly but they still appear excessively jumpy at about 1 unit. This only happens in plotable drawings that contain a certain 2D xref and the offending xref itself. If i unload all the xrefs the problem DISAPPEARS, although this doesn't let me draft any easier!
My OSNAP is working fine although it does reset itself when i have been using certain LISP routines.
FYI, if I open the same drawing on another users computer the SNAP stays off and the crosshairs run smooth.
I had with a custom texture not showing up on my parts while they were showing up on a coworkers computer fine. I recently cured my own issue (I just needed to click Textures On in the View toolbar under Appearances). I am thinking it is going to be a simple fix as well but I have not been able to find it.
Everytime I close out of a part or assembly it automatically turns the textures back off so I have to turn them on everytime. I looked through the Application Options and Document settings to keep textures turned on but could not find anything. How to turn the textures on and leave them on?
When I open a picture in PS CS5, it automatically turns into a yellow-like gradient. IDK. It's always like this... I tried looking for the problem in the layer style setting, but all of it are in set in "default"
View 4 Replies View RelatedI have a jpg with a white background, but when I place the image into my sketch the white background becomes grey.
see attached pic.
How do I get the decal to display the correct color?
I have three "spotlights" that I made with the radial gradient tool:
The top is what I have, the bottom is kind of what I want.
I want to blend them where they are together, but not have them lighter
where they cross than the middle of the spotlight.
I just ran into a problem, using Videostudio X5 Ultimate. When i try to import a .PNG-image with a transparent background, but then the background of the imported image turns black.
However, when i open the same image in an image-viewer, the background actually is transparent.
This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
View 3 Replies View RelatedI have 33 images and each image has a white background. To make an animated .gif file I open the 33 images in GIMP 2.8.2 as individual layers and export as a .gif file. For some reason though, when it creates the .gif file, the background turns blue?
View 4 Replies View RelatedWhen I convert an RGB psd to CMYK color mode in photoshop everything works normally, but when I save as a TIF and open the file in any application other than Photoshop any white space in the image background is yellow.
I am running Photoshop CS4 on Mac OS 10.5.8.
when you draw on a black background with white, it comes out black ink on white paper.
is there any way to automatically adjust the contrast of lines with the screen background?
so if i have a dark grey bacground and use a lighter grey line, it is still distiinctive on the white paper?
I used the cut command within an assembly and it made the cut parts turn red. How can I turn this indicator off?
View 9 Replies View RelatedI have snap on, and Im drawing as usual. At some point I want to mirror something:
MIRROR
-select object, done, enter,
-select two dots of the axis
in this phase, where I'm supposed to pick the points, snap turns off, or stops working. I turn it on and off, I uncheck all the options, check them again.
When im replacing the balloon arrow it turns into a black dot. Pretty annoying to change all the dots to arrow everytime.
View 4 Replies View RelatedHow to make the pdf's clearer better quality?
When i try plotting to dwg to pdf using dwg to pdf.pc3 plotter, the pdf's is bad quality, text is unclear in some areas and lines is "out of focus".
I have tried recreating the pc3 file with no luck.
I am using autocad 08 LT and everytime i plot to pdf using standard cad dwg to pdf.pc3 the txt turns out bold.
View 9 Replies View RelatedWe use only polyline when drawing. Plinetype is set to 0.
First problem is with J (join) command. Sometimes when we try to join different polylines it kills a vertex. Example if i have two polylines (they are not joined) that forms a rectangle it will join them but kill one vertex and turn it into triangle. This dosen't happen all the time.
Second problem i figured a way round for the problem above, if i use the pedit command and then use j the above problem never happens. But instead (also not every time) it turns the joined polyline into lwpolyline. So its all pretty anoing as we have to use convertoply.
Is there some other command than plinetype to resolve his problem.
I have a problem in my ucs icon when i am drawing/rotating and dimensioning my drawing.. the ucs turns to have extra lines and even the dimensions has unnecessary lines. how am i suppose to fix this
View 2 Replies View RelatedI am having an issue with pipe and tube routing in inventor. I am new to it and every once in a while a route that i create turns red in the browser bar, I also noticed that a few of the routes have issues where the adaptivity gets turned off by itself. I assume this has something to do with the route turning red.
inventor 2014 professional
I have Autocad Architecture 2011 and it was working perfect until Yesterday. I Repair and then Reinstall but still the same problem.
When I have a Parellel (isometric) View and transfer to perspective works well but when I exit from the orbit function everything disappear and the cursor become crazy. I push pan and appears the drawing I release pan and the drawing disappear. The same problem in a viewport. I setup the perspective view on the viewport, lock the v-port, save and close the drawing, then open the same drawing and the perspective view become Isometric.
My coworker gets this error:
He makes a detail. In the enlarged view he makes a sketch. He then makes a break out. Within the enlarged view, in the gap which the break out opened up for clarity of the view, are two components that he wishes to make its hidden lines visible. Doing this locks up his machine and makes a single component turn red.
Dell Precision T3600 - Windows 7 SP1, 64x
16GB RAM, NVIDIA Quadro 2000 (driver 9.18.13.3165)
Inventor 2013 SP2 Update 2
AutoCAD 2013 SP2
Vault Collaboration 2013
3DConnexion SpaceNavigator
The pickbox keeps turning into a rectangle and not a perfect square. It's width is less than its height. This keeps happening and is annoying. When I close AutoCAD 2012 and then reopen the drawing its a square, but soon turns into a rectangle.
View 4 Replies View RelatedI have a little problem with autocad 2012. When I open a dwg in autocad 2012 some hatch turns solid, but same dwg is fine in autocad 2011 or previous versions. What is interesting if I am in autocad 2012 and i click on the hatch and change something on the properties and i click enter it turns normal to what it should be. So i click on the hatch again change back the whatever it was previously and hit enter. I regen everything and its still fine. So basically i did nothing to it and its fixed. So this might be bug I am not sure. So after all this, i save the dwg and exit. I re-open the dwg again in autocad 2012 the hatch is back to solid. What is very interesting in autocad 2011 everyhing is fine no hatch problems at all. I attached two pdfs as to what it should looks like when its correct hatch and what it looks like when i open it.
View 9 Replies View RelatedI got this weird error on Civil 2012, I have been working with Civil products for a few years now and have never had this happen till today. Other co-workers have had the same problem which only started to occur yesterday.
The Error; Was working on a drawing with multiple layers, surfaces, alignments, assemblies, corridors, and of course point groups. The screen froze for about 2 seconds when I was attempting to hatch an object, after the quick freeze all my layers (each assigned different colors) turned on (visible) and changed color to white. Everything on the drawing became inactive except for the save button and the close button. So I saved it and closed the drawing, I had other drawings open at the same time and these were never affected (still had color and could work on them). Since the save button was still working I never lost any work that I had completed but it is still annoying having to close and open the drawing since larger drawings can take a few min to open.
Is this an Autocad issue or is it something with our machines/network?
Intel(R) Xeon(R) CPU @ 2.53 GHz
6 GB Ram
NVidia Quadro 600
64-bit Operating System
When using the 'space generate' option when inserting a space, the tool automatically turns off 'object snap' and then of course it doesn't turn it back on at the end of the operation. I tend to need to switch back and forth from auto generate to polygonal insertion and having to reset object snap every time.
View 3 Replies View RelatedMirroring a part or assembly in 2014 makes the derived part with all sketches visibility on, nevertheless the original sketches visibility is off.
[URL]....
It makes me sick switching them down.
Is it treatable?
I've been using Autocad 2007 for the past 5 months without these issues, then I had to create a new account on my computer at work and now EVERY time I create a hatch it turns into this dead mass. Yes, I've tried creating an associative hatch, and no, I can't edit them either.
View 9 Replies View RelatedI'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedI'm inserting a data link from excel into my CAD drawing and every time I try to select the table it brings in, the corner "grips" the green plus signs, are so huge they are bigger than my sheet and I can't see anything in the table. Any way to shrink them to a rational size?
View 2 Replies View RelatedI create a engine assembly and used "Drive Constrain" to rotate the crank shaft. The animation shows the crank shaft turns continuously in one direction. However, when I animate the constrain in Inventor Studio, the crank shaft turned in two different directions (see the vide file attached).
May I know why the crank shaft turns different direction?