I have 33 images and each image has a white background. To make an animated .gif file I open the 33 images in GIMP 2.8.2 as individual layers and export as a .gif file. For some reason though, when it creates the .gif file, the background turns blue?
View 4 RepliesI'll try to write this logically, but as logic has failed to get me the output I want, I suspect somewhere there will be something highly illogical...
I am trying to export a JPEG file, complete with images. I have setup the original file to 2362x602 pixels, at 300 ppi (making a canvas approximately 200x50mm). This is confirmed through Image -> Canvas Size.
Now if I want to print to paper, I can check the settings through Image -> Print Size, to confirm what size I will get.
What I want is to be able to do the same thing for an export jpg function. I need the JPG to come out at a specific dimension, not a specific pixel size. If I export my file now (File -> Export) as a jpg, I end up with a jpeg much wider than 200mm. A quick rightclick->properties shows me the jpg is still 2362x602 pixels, at '300dpi.' So why is that not the size I expect it to be?
When adding a foreground image to a "flaming" blue background, I find that the image I add takes on the blue colors of the background, rather than keeping its original colors.
The linework and highlights (indeed, most of the detail) remain - they just all turn blue, heh. Like it's trying to camouflage itself. How do I keep the foreground image from "masking" itself to the colors of the background?
Both background and foreground image layers are in .xcf format. Could this be the problem? Do I need to change one or both to something like .jpg or .gif?
i've already installed my copy of CS6.when it runs all of window of my desktop turns in a blue tint included of course the image i'm working on. what have i tu adjust? i had no problems wirh previus version (i upgraded from CS3 extended, it's a long jump)
View 8 Replies View RelatedWhen working in the Liquify filter, my image turns blue and white. See screen capture. I never had this problem in previous versions of Photoshop, before CS6. Is there a way to view the image itself instead of the blue silhouette?
View 4 Replies View RelatedWhen I edit my photos, anything that I try to darken, turns blue. All of the blacks turn blue. It didn't used to do that. What am I doing wrong?
View 2 Replies View RelatedI have been running CS5 for over a year on Windows XP and today it won't launch. No messages-nothing. When I click the PS icon it turns light blue as if launching but then nothing.
View 2 Replies View RelatedI've completed my flyer and everything looks great in Illustrator, however when I save the document as a PDF the entire thing turns a dark shade of blue. It almost looks as though the whole page as been highlighted. This only happens when it's opened as a PDF and not in Illustrator.
View 1 Replies View RelatedWhen I open PS my powerbook screen turns a a light blue like a photofilter had been applied to it. The second I shot down the app, my screen color returns to normal. This only happens with PS not LR, AI or any other app I have. Also it just started last night and is continuing to be troublesome today. Obviuose I cannot properly correct photos when everything has a blue tint to it.
View 2 Replies View RelatedJust recently upgraded to Corel X6 and the colors suddenly changes. For example: A blue box changes to purple when I try to re-open the file I have previously saved. Also, embedded raster images turns to green.
View 10 Replies View RelatedI'm trying to line up some audio with my cuts. I can see the the amplitude but as soon as I hold and move the audio it turns "light" blue. And I can can't see the waveform, which is useful a lot.
All I want to do is line up the cuts with the a back ground beat.
Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies View RelatedI've just installed Gimp 2.8.10 on my fresh Win 8.1 x64 installation and I cannot export or open any type of image 'cos there isn't a single option to choose a file type when exporting and also, Gimp doesn't recognise images on my hdd when I try to open them.
So far I've used Gimp on Win 7 x64 and didn't have any problems. The only driver I currently have installed on my system is the graphics driver.
Basically I've got the cut out that I want to blend into a picture, and what I do is get the images as near the centre of the canvas as I can, then copy and paste a new layer. Take the new layer and reduce it in size by say 95%, then try to centre it within the original image behind is as best I can. Select round it with the fuzzy select tool, then delete the smaller image. Move back to the original image and then add mask layer and use gradient blur to introduce a gradually fading of a few pixels round the edges.
The trouble is this method is not really good for complex shapes and often involves some iWarping to get the smaller image within the boundary of the larger one. So my question is, is there an easy way to fuzzy select round an image boundary that can introduce an arbitrarily chosen margin, say 5 or 10 pixels?
Anyway this is the kind of thing I am working on at the moment, making trippy fantasy images using dead animal's skulls.
I am working on an anime picture. I want to have two of the same images, one larger, with no background, and transparent. The other will be just the image. I have that done, but how do I get rid of the checkerboard pattern, it's difficult to work with it in the way. Also, both images move together, how do I stop that from happening?
View 6 Replies View RelatedI have found the "Export Layers To Files" in File-->Scripts which is pretty slick. I have a PSD file with about 60 layers, so this is handy.
The trick though, is that when they get exported out to a file I want them all to have the same background.
I have a layer that I want to be the background for all the images, right now it's "Layer 1". Is it easy to modify the export all layers script to use Layer 1 on the image copy before saving it? It looks like the script takes each layer, creates a new file, copies the layer (which is transparent) and then saves as a JPG. I just want one extra step in there that will copy the Layer 1 layer for each image too.
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies View RelatedI am trying to create a network infrastructure diagram for where Iwork with Diagram.
For this I am putting into the diagram, images of: servers, switches,racks and so on. What I wish for those images is to have transparent background. So far, I've been able to find decent resolution imageswhich it's because I've started with the latest hardware.Here's an example, let's say for our Dell PowerEdge 6850 servers if found this: [URL] ....
which by fuzzy selecting the white background, with a threshold of15.0 and some selection subtractions I've been able to turn to: [URL] .... which is nice for what I wish to use it for.
Now, I've been able to handle some easy likewise situations but nowI've reached the vintage hardware and got bad results. Let me show an example image: [URL] .....
This is more difficult to make it look as I wish since it's resolution it's not decent and it also has a shadow effect which hardens a precise initial selection which can then be worked out to a better result.
After some efforts I either end up with a pixelized image or with a severely chopped image.
So, my question is how could I achieve the desired result for this and such images?
Without any warning my computer simplu shuts down, similar to the effect of unplugging it from the power outlet. No shutdown screen or anything. This happens somewhere during the process of exporting or importing photos.
View 20 Replies View RelatedI just ran into a problem, using Videostudio X5 Ultimate. When i try to import a .PNG-image with a transparent background, but then the background of the imported image turns black.
However, when i open the same image in an image-viewer, the background actually is transparent.
I use Autocad 2013. When I turn on the Sun and Sky Background, the spotlights automatically turns off? This happens every time and the render is awful... Bright windows, no light in the room And the opposite: When I turn off the Sun and Sky Background everything is ok. But the windows are dark....
View 9 Replies View RelatedFor quite some time I've been trying to find the best way to remove a white background from images. I've checked out the sticky thread on this forum and as my image isn't of great quality and because it features quite a lot of white that won't apply.
Recently I found this tutorial which is supposed to work great (as seen in the comments). However, I think that because of a GIMP update that won't apply anymore somehow. I was hoping you guys might know what was causing it.
Everything works well until I get to step 7, where I have to select to Alpha. There it selects just the outlines, but my selection includes inner parts of the image, not just the background. And then after I invert and delete, the white that remains still has transparent parts that show up on the upper layer. So, am I doing something wrong with the Alpha to Selection, is that tutorial updated or is there a better way to remove the background from ie. a logo with just one background colour which isn't of great quality.
Sent to Mudbox working fine and i can see all uvs and so on, however sent back to maya with UVS and textures giving me hard time, whatever i do it always send it to maya with black textures. I have 3 layers on normal,spec and diffue...
View 1 Replies View RelatedAnytime I draw a sketch the surface of the part highlights to a red color. It is hurting my eyes and how to switch it off.
I am using a new 2012 .
I have a jpg with a white background, but when I place the image into my sketch the white background becomes grey.
see attached pic.
How do I get the decal to display the correct color?
This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
View 3 Replies View RelatedI'm using a Javascript that will export as JPG a series of images from an AI file (that part is working fine), then rename them (that part isn't working). Writing and troubleshooting with Extendscript.
Trying to eliminate as many possible places to go wrong, I came up with the following:
myfile = new File; myfile = myfile.openDlg();
var newName = "NEW.ai";
myfile.rename(newName);
When run targeting Illustrator, it does nothing.
When run targeting ExtendScript, for some reason this blasts the file into oblivion, never to be found again.
i'm new to all of this and i've got a couple of questions. i'd like to export (from lightroom 3) a file of a little over 100 images for proofing by a client. a) i'd like them watermarked on the website i send them to --how do i do this? and b) how do i remove the watermark on the images that i have that i want to make prints from? i'm terrified of doing something that i can't take back and ruining the photos.
View 5 Replies View RelatedI found a script online that turns my images into a square (by extending the canvas size of the short side to match the length of the long side) which is awesome, but I would like to do an additional step.now that my images are square I want to set a maximum dimension of 2500x2500 px, i have found scripts to set a resolution to a specific size but what I want to make sure I avoid is upsampling, so I just want any image larger than 2500x2500 px to down sample to 2500x2500 px.
View 4 Replies View RelatedI have recently upgraded to 2.8 and am having problems with export to jpg, as opposed to old system of 'Save As" jpg.
When "Show preview in image window" is ticked, File size always appears as 1.3GB. If 'Quality' is reduced, file size displayed does not change to a new reading as it used to.
When I go ahead and export, the file is much smaller than 1.3GB. What do I need to do to get the file size in 'Export Image as JPEG' window to show an accurate file size?
Using Windows 7.
My grafic has 600ppi grayscale.
I want to export a pcx-file with 600ppi, but exportet pcx-file has only 300ppi.What can I do?