AutoCad 3D :: Create Eating Spoon In 2010 Version?
Oct 28, 2011How to create an eating spoon in AutoCAD 2010?
Actually, I only need a technical drawing of an eating spoon.
ADVERTISEMENT
AutoCad :: How To Draw A Spoon For 2011
Sep 15, 2010need of a DWG file of a spoon made in AutoCAD 2011 supply a image and the DWG this would be the biggest favour in the world.
View 9 Replies View RelatedPhotoshop :: 5.1 Photomerge - Eating Up Too Much HD Space?
Sep 7, 2012I am often photomerging large sets of RAW images (8 to up 30 images at a time). Yesterday, I photomerged 25 images (each image is about 14MB) together. Before the photomerge ran, I had 35 GB HD space available. After the Photomerge finished and after saving it, I had 8 GB of HD space left. The saved image was about 880 MB total. Thinking the space would be recovered after I quit Photoshop and emptied the trash, I only had 27 GB of HD.
Therefore, Where did my 8 GB of HD space go? 35 GB to 27 GB, having saved a file that is 880MB. After restarting my computer and verifying the trash was emptied, my HD space was still at 27 GB.
Photoshop :: Bridge Is Eating Up RAM Memory?
Aug 30, 2013When I download images from my DSLR to my Mac, the images are cached by Bridge. As they are cached, I can watch the amount of "Inactive" system memory increase in Mac OS's Activity Monitor utility. If I download 8 GB of images, 8 GB of "Free" memory is assigned to inactive memory.
When I close Bridge this memory does not convert back over to free memory, but remains allocated as inactive. Combined with "wired" and "active" memory, I eventually run low of free memory while running other apps, slowing down my system. As much as 2/3 of my 16 GB total memory can be allocated as inactive. To convert this inactive memory back to free memory, I must restart my Mac. When I launch Bridge and other apps again, inactive memory appears normal in Activity Monitor at around 125 MB, and usually remains under 2 GB depending on what apps and files I work with.
Is this memory usage by Bridge after downloading images normal or do I have a problem?.
Photoshop :: CS 2 Eating Up All Of Virtual Memory
Oct 17, 2005I just updated to CS 2 from PS7. I am running a 2 Ghz Pentium 4 with 512 MB of Ram. Windows XP.
My problem is that when you start CS 2 it starts to eat away the virtual memory like crazy, eventually causing the system to hang.
My scratch disk is on a separate physical drive from the OS. I also reset the pref file to no avail. Does any one have any suggestions or seen this type of behavior?
AutoCAD 2010 :: Save As Version 2004
Mar 22, 2012I have 106 files that I have to save as version 2004 for a contractor. They have been able to open all of the converted files except one. I have run an audit and found nothing. I have purged everything and still no luck.
View 1 Replies View RelatedAutoCad :: Plotting TIFF To PDF In 2010 Version?
Jul 27, 2010I have a tif background that shows up in my pdf plot preview, but it will not actually print. All I get is a pdf showing the linework. I've recently switched from 2008 to 2010 and am wondering if that has anything to do with it as I had no problems in the past? While the tif file is large, it always plotted in 2008.
View 7 Replies View RelatedAutoCAD 2010 :: Import SAT Files Into Educational Version
Jan 14, 2013I am trying to import .sat files into an educational version of autoCAD 2011. I am using the import command and selecting the .sat format selecting the file and then I am getting "Unable to read the ACIS file E:01904 GS PM_2.SAT"...
View 6 Replies View RelatedAutoCAD 2010 :: Student Version Freezing And Not Responding?
May 16, 2012I have just loaded the student version of AutoCAD 2012 onto my brand new HP Pavilion Notebook which has 8 GB of memory - Processor AMD A8-3530MX with HP Graphics 1.90 GHz - running Windows 7 Home Premium 64-bit.
I have created a file in Adobe Illustrator which I converted to a vector image and exported it to AutoCAD. I have loaded the image and have cleaned it up. I am now trying to re-scale it and my session keeps freezing. When I look at the task manager I see that the program is not responding. I have ended the task many times now!
AutoCAD 2010 :: Converting 2012 DWG To 2007 Version?
Mar 23, 2012When I I convert a 2012 dwg into a 2007 format whether using true view or "saving as" 2007 from an open drawing, some of the graphics disappear. How do I convert withour losing these graphics?
View 1 Replies View RelatedAutoCAD 2010 :: Automatic Save To Whatever Version Was Loaded?
Mar 6, 2013I know Autocad can be set to always save to a particular version number, but can it be set so it always saves back to whichever format the drawing loaded was originally? If I load a 2004, it saves as 2004. If I load 2007, it saves as 2007, etc?
View 3 Replies View RelatedAutoCAD 2010 :: Can't Reinstall 2012 Student Version
Aug 1, 2013Wiped my whole computer clean, reinstalled Windows 7, Can't reinstall Autocad 2012 student version.
Installation failed and this is the line from the log:
2013/8/1:13:30:28 carol HENRY Installing Microsoft Visual C++ 2008 SP1 Redistributable (x86): D:3rdPartyx86VCRedist2008SP1vcredist_x86.exe /q
2013/8/1:13:30:48 carol
AutoCad 2D :: Extended Inquiry Menu In Version 2010?
Jan 3, 2012i started using autocad 2010 in my newly joined office. on using the di command from the inquiry, toolbar a drop down menu appears. after i have selected two points between whom the distance has to be mesured , i have to select an option [as seen in the screenshot]. is there any way to expand the inquiry toolbar just like it used to be in the extended form in version 2009 and older??
View 3 Replies View RelatedAutoCAD 2010 :: Saving Drawing To Older Version?
May 6, 2013 have two questions:
1: I currently am using AutoCAD 2011 is there any option to back save drawings to 2008? I do not seem to have this choice.Only 2010 or 2007 or 2004.
2: If I upgrade to 2014 or 2013 will I have the option to back save to 2008?
AutoCAD 2010 :: Fetal Error While Working With 3D And 2D Version
Aug 22, 2012i am usually getting "Fata Error " while working, it comes normally 5-6 times in a day and its so irretating to shut down the autocad and restart the whole thing.
i am using below config system
Intel Core i3/ 4GB/ 500GB HDD/ 1GB NVidia Card/ Gigabit Lan/ Windows 64 Bit OS
i have installed Autocad 2012 3D 64Bit version. and my file location is on network with attached NAS connected on 10/100Mbps Network.
there are totally 7 desktops out of which 3 pc's are having 3D License and rest 4 are having 2D License.
Remember all my data stroed on my NAS and all 7 users access from netwrok to modify and editing of my Autocad files size not more then 200-400Kb
attached snap shot of error generated on screen.
AutoCAD 2010 :: 2012 Crashes When Saving To Earlier Version
Feb 7, 2012Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
AutoCAD 2010 :: Trial Version Missing Toolbars And Ribbons?
Feb 3, 2012I have been using my autocad for a few days now and it appears that the program is not operating properly. I am missing toolbars and ribbons. Is this an issue with the trial version, or is there a registry trick to unhide the ribbons?
View 7 Replies View RelatedAutoCAD 2010 :: 2004 Version And Saved In 2000 Cannot Be Opened In 2012
Jan 21, 2013why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View RelatedAutoCAD 2010 :: Open And Create A Drawing In 2012 From Visual Basic 2010
Jul 1, 2012I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
Illustrator SDK :: Create Plugins From Xcode Version 5.0.2
Feb 26, 2014I'm a newbie for Illustrator plugins and I was referring to [URL] .... as a start up but the example gived used Xcode 3.1.1. I'm using version 5.0.2 and I found that most the steps cannot be find in newer versions. Where I can find material for beginner to learn.
View 4 Replies View RelatedPhotoshop Elements :: Cannot Create Text Placement In Version 4
Apr 29, 2013I can't control text placement in photoshop 4. When I enter 2 letters, the line then zooms off to the right - right off the image. I tried uninstalling and reinstalling and it didn't work.
View 2 Replies View RelatedAutoCAD Inventor :: How To Open Higher Version File Into Lower Version
Jun 11, 2012I am unable open some part files and assebly files which are made in 2012 version. I have 2011 version.
View 2 Replies View RelatedAutoCAD Inventor :: How To Move File From Newer Version To Older Version
May 31, 2013how to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies View RelatedAutoCad :: Macro Commands From Version 2000 To Version 2012?
Nov 15, 2013I have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
AutoCad :: Opening Older Version Of Files On Newer Version?
Nov 16, 2012is there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
View 9 Replies View RelatedAutoCAD 2013 :: Copying And Pasting Drawing From Version To Version
Jun 15, 2012I have the 2013 AutoCAD Student Version and I want to transfer my file to the AutoCAD 30-Day Proffessional version, Can I do this by easily Copying and Pasting the drawing from version to version?
View 9 Replies View RelatedAutoCad :: How To Open New Version DWG In Old Version
Feb 12, 2013i have one dwg in 2013 but i do'nt have cad 2013 so i want to open it in 2012
View 5 Replies View RelatedAutoCAD 2010 :: How To Create New Hatch
Jan 8, 2011How can i create new hatch? In hatch option, user define hatch option is given. So how can we define the new hatch?
View 6 Replies View RelatedAutoCAD 2010 :: Create A New Linetype?
Apr 25, 2013I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedAutoCAD 2010 :: Create A Linetype
Jul 1, 2013Is it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies View RelatedAutoCAD 2010 :: Create New Layer
Sep 10, 2013This is what is happening,
for example, i have a layer for dimenisioning called, 'DIM.' I'm not sure when it happens but AutoCad creates new layers that are called: DIM @ 12, DIM @16, DIM @ 18, DIM @ 128....It does this for different layers as well. There must be some significance of Autocad adding a @ # at the end of the layers name.
It then changes certain blocks from the regular layer, to these new ones. It doesn't affect any block consistently. So one block 'A' is changed to the new layers, but the other block 'A' is not changed.
The only thing I did differently for this drawing set was used dxfout/dxfin to purge dgn files out of my drawing, any possible connection there?
