Photoshop :: 5.1 Photomerge - Eating Up Too Much HD Space?
Sep 7, 2012
I am often photomerging large sets of RAW images (8 to up 30 images at a time). Yesterday, I photomerged 25 images (each image is about 14MB) together. Before the photomerge ran, I had 35 GB HD space available. After the Photomerge finished and after saving it, I had 8 GB of HD space left. The saved image was about 880 MB total. Thinking the space would be recovered after I quit Photoshop and emptied the trash, I only had 27 GB of HD.
Therefore, Where did my 8 GB of HD space go? 35 GB to 27 GB, having saved a file that is 880MB. After restarting my computer and verifying the trash was emptied, my HD space was still at 27 GB.
View 2 Replies
ADVERTISEMENT
Aug 30, 2013
When I download images from my DSLR to my Mac, the images are cached by Bridge. As they are cached, I can watch the amount of "Inactive" system memory increase in Mac OS's Activity Monitor utility. If I download 8 GB of images, 8 GB of "Free" memory is assigned to inactive memory.
When I close Bridge this memory does not convert back over to free memory, but remains allocated as inactive. Combined with "wired" and "active" memory, I eventually run low of free memory while running other apps, slowing down my system. As much as 2/3 of my 16 GB total memory can be allocated as inactive. To convert this inactive memory back to free memory, I must restart my Mac. When I launch Bridge and other apps again, inactive memory appears normal in Activity Monitor at around 125 MB, and usually remains under 2 GB depending on what apps and files I work with.
Is this memory usage by Bridge after downloading images normal or do I have a problem?.
View 8 Replies
View Related
Oct 17, 2005
I just updated to CS 2 from PS7. I am running a 2 Ghz Pentium 4 with 512 MB of Ram. Windows XP.
My problem is that when you start CS 2 it starts to eat away the virtual memory like crazy, eventually causing the system to hang.
My scratch disk is on a separate physical drive from the OS. I also reset the pref file to no avail. Does any one have any suggestions or seen this type of behavior?
View 4 Replies
View Related
Oct 28, 2011
How to create an eating spoon in AutoCAD 2010?
Actually, I only need a technical drawing of an eating spoon.
View 2 Replies
View Related
May 15, 2010
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
View 89 Replies
View Related
Apr 4, 2012
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
View 1 Replies
View Related
Aug 3, 2003
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies
View Related
Nov 9, 2008
I took a series of photos (9 shot vertically) of the lobby of AKL. I made adjustments in Bridge (3.0.0.464) then choose Photomerge through tools in Bridge to process the pano in CS4 (11.0). The images were processed for the natural light. Follow the link to see what CS4 came up with. The files were .dng processed with CS3. I have made many other photomerges using this combo, but this is first to achieve this type of result. In CS4, I used the vignette and distortion options.
View 18 Replies
View Related
Nov 18, 2008
I'm using Photoshop on Vista 32. When I try to do a photomerge either from PS or Bridge, it does its stuff, then closes everything immediately. Reboots / changed options make no difference.
View 17 Replies
View Related
Feb 1, 2009
When i run a Photomerge (using jpegs) i have even tried using the sample jpegs that come with the software of the SF skyline.
I select my images, and it runs the usual sequence of starting the layers and merging then when it ends its just dissappears looking like the software has just opend with nothing happening.
Ive tried every combination to make them work and nothing.
i never get to see any results.
I am using CS4, and ive also tried in CS3 again which is still installed on my partition. and its not working in that either. it used to work with no problems bit not now.
View 15 Replies
View Related
Feb 17, 2009
Just created a panorama out of 4 jpegs (together about 33MB) and saved it as jpeg.
Now I want to create another panorama out of 10 jpegs (together about 73MB), it worked fine, but I can't save it in jpg format. CS3 only offers .psb, raw or tif.
View 3 Replies
View Related
Dec 17, 2008
I tried 4 times consequently to stitch 4 images in Photomerge activated from Bridge - with same settings (auto and defaults i.e. blending images on, vignette removal off, distortion correction off). I was surprised of the result because each time I tried PS generated different panorama. Just to make sure I thoroughly checked if the stitch settings were really the same - they were... Am I missing something essential?
View 4 Replies
View Related
Nov 20, 2013
When I click file automate - photo merge, I get an error message popup saying "Photoshop CS5.1 has stopped working." with options to check on internet for solution or close program. No error codes!
I reloaded my Photoshop to my C: drive about a week ago, but everything else seem to be working as it is supposed to. I have also installed a wacom pro, but I can't see where this would affect it.
View 4 Replies
View Related
Oct 29, 2012
When I have two or more photos open and I want to move them around, everytime I drag one over the other it becomes transparent. This transparency seems to happen once I drag the photo over the ruler but I could be wrong. Once I release the mouse button the two merge into one photo. I believe this has something to do with the photo merge feature. Can I turn this off?
View 4 Replies
View Related
Aug 15, 2012
I've seen recent posts about Photo merge crashing, I tried all the workarounds and remedies to no success. I run as Admin and still crashes, and only Photo merge is causing to crash. All other presets and automates are working just fine. I've deleted all Temp files and App Data, still nothing.
My stats are:
Windows 7 Professional
Intel i7 vPro (2860Qm @ 2.5GHz)
16GB Ram
Nvidia Quadro 2000M (lastest drivers, 266.96)
Scratch disk is 200GB and I'm using about 9GB of Ram
So I don't think it's my computer that's the problem, but either the java script file for the automate or possible update?
View 15 Replies
View Related
Jul 15, 2012
Photoshop CS5 crashes when I try to use photo merge. Is there anything I can do so this wont happen?? Now I can't make panorama pictures. It's on my laptop it doesn't work. Samsung laptop with Windows 7. It works on my stationary computer with Windows Vista. I have the same version of PS CS5 on both computers.
View 2 Replies
View Related
Apr 10, 2009
The Photomerge in Photoshop CS4E is a fantastic tool when it gets it right, but what can you do when it doesn't? I've got a bunch of 9 images (in a "Noughts and Crosses" or "Tic Tac Toe" layout), all with 50% overlap, but a lot of fairly blank areas - this can't be avoided, they are nautical charts. When I do Auto Photomerge on these, a couple of the images get put in the wrong place. Is there a way to position the images in their approximate place, then get Photoshop to finish the job automatically?
View 3 Replies
View Related
Mar 3, 2009
cs3 had this option when creating a photomerge that made it so much easier to combine several photos when cs3 got lost in trying to merge.
I looked and looked in cs4 for the interactive command, so much simpler than grabbing the eraser and opacity, but I could not find the interactive addition for photomerge. Has it been moved or what ? IIRC in cs3 it was interactive from bridge..
View 3 Replies
View Related
Oct 16, 2008
When using the Photomerge tool in CS3 to do merges of 10+ images (10MP RAW), the process almost always stops at the blending step. Images are laid out properly, but the edges are not blended. Is there a particular reason for this? System has 3GB RAM, running XP (SP3).
Note that for smaller merges, the process completes fine.
I'd also be curious to know if the Photomerge facility has been improved in CS4. It works well enough, but on a dual-core 2GHZ system, it still can take 5 minutes to do an 8 image photomerge.
View 3 Replies
View Related
Sep 24, 2008
I have read and understood the Photomerge tool (and tried the process with the sample images that are in CS2). All this seems to be fine except for a couple of things...
1. To achieve 180 degrees I am going to need more than 3 images right? (overlapping each image by 15%-40%).
a. Can Photomerge in CS2 work with more than 3 images, or is 3 the maximum??
If 3 is the maximum, then it wouldn't be difficult to just increase the canvas width and add on? Or not? Or do 2 sets of 3 then hand stitch those together? What is the best process for achieving 180??
Also, I like to shoot just before sunset,usually. If I did a 180, say with the sun setting in the right hand side of the image, then panned to the left snapping as I go, I am obviously going to get different gradients of blue in the sky, (lighter sky to the right, a darker sky to the left)
Should I shoot in Manual or Aperture?
How will I get the tones in the sky to be seemless?. As long as I overlap by 15% - 40% all should be good?
What is the best process for achieving equal exposure in all shots?
View 1 Replies
View Related
Jul 26, 2008
My new instal of CS3 does not have FILE|Automate|Photomerge showing as an option. It did previously. It also lacks the icon to shift to Bridge. When I use the File command to start Bridge I get an error message about missing a JAVA script.
When I start Bridge (which appears to work) and try to send files to CS3 for Photomerge, it tells me that CS3 busy and asks if I want to queue up the work (even if CS3 is open).
View 9 Replies
View Related
Apr 10, 2009
This has happened a number of times now, both in CS3 and CS4. When I run the process as I normally do for a motomerge, the process goes along swimmingly until the output stage where the image is closed and nothing is left for me. I don't close the image and I have no idea why it does.
I have used photomerge successfully before, so Im unsure of what the problem is.
View 2 Replies
View Related
Feb 26, 2014
PSE 10 has interactive layout PSE 12 does not. How do I merge 1 or more pictures or a 2 page magazine ad? No problem doing this with 10.
View 4 Replies
View Related
Oct 26, 2013
I have done a photomerge in PS CS6 of two birds in flight as the wings are clipped. The images merge nicely but the problem is that the blurred bird has been placed on top of the sharp bird, i.e. the top layer (bird with blurred eye) is blocking the bottom sharp bird. I have clicked and dragged the bottom layer to the higher position on the layers panel but the images do not swap positions.
View 6 Replies
View Related
Dec 9, 2012
I'm getting this error message when I try to use photomerge. I'm using CS5, and this is the first time I'm trying to use photomerge. I've tried several different photos but I'm always getting this message.
View 2 Replies
View Related
Aug 25, 2010
cs4 - working from Bridge - I select 3-5 files and go to photomerge. I keep getting the message "photomerge needs at least two files selected" from photoshop. How can I get photoshop to see what bridge is telling it?
View 6 Replies
View Related
Jan 29, 2013
I just took three images of a sunset so that I could create a panorama image. When I use photomerge in photoshop cs6, only two images merge together and the third image is left by itself. I overlapped each image a sufficient amount but I still can't merge the third image.
Here is a screenshot of the end result. Am I not overlapping enough, or is there something I am doing wrong?
View 1 Replies
View Related
Jul 12, 2013
up until now, I had no problems with photomerge. Recently, worked on about 800 images in CC, about 30 of them merges, with no problems at all. However, this changed today, as I tried to merge 2 images. PS kept on hanging half way trough the process, the only to stop was through task manager.
Rebooted the PC and tried others - which I had merged before - with the same result. It doesn't matter from where I open them. The only thing I have done since the others, is uninstall CS6. There doesn't appear to be a way to repair the installation, or at least none that I am aware of.
View 1 Replies
View Related
Jul 2, 2013
I get:Works fine in 32 bit.
View 1 Replies
View Related
Jul 30, 2012
When trying to use photomerge, Photoshop (CS 5.5 version) quits immediately. How can I fix it?
View 6 Replies
View Related
Aug 22, 2012
I've been trying to make this feature to work since PS CS5 and now PS CS6:When you select more than a couple of images in Bridge and want to run the PS / Photomerge , then you get a dialog where "Layout auto" and "Blend images together" by default are checked; if you continue, you`ll end up in PS with layers which are OK in Alignment but not in blending.Whereas if you turn off the "Blend images together" then you´ll end up blending the images manually by means of the "edit / auto blend" and there it will work fine. In this case I´m trying to blend different images to expand my depth of field.I wonder if Adobe is aware of this that has been running badl for over 3 versions of PS now.
View 1 Replies
View Related
