I have done a photomerge in PS CS6 of two birds in flight as the wings are clipped. The images merge nicely but the problem is that the blurred bird has been placed on top of the sharp bird, i.e. the top layer (bird with blurred eye) is blocking the bottom sharp bird. I have clicked and dragged the bottom layer to the higher position on the layers panel but the images do not swap positions.
View 6 Repliesto swap a face over from one image to another. It is the same persons face but it is twisted slightly and i cant make it look right.
View 3 Replies View RelatedI have one pic of my mom and dad. I just want to swap the heads of my mom and dad. I keep trying and I have created a new layer. But when I cut my dads head and move it and then try to cut my moms head I can't go back to my dad's head and move it to where I want it.
View 3 Replies View RelatedIs it possible to swap which side of a closed path - inside or
outside - masks a fill layer?
Let's say you draw a closed path with pen tool and then add a solid color fill layer which will be masked by the path so that the inside of the
path gets the color - what if you want the color on the outside instead,
how do you do it?
I am looking to use two pictures and in one swap the faces as one the boy was looking and the other he wasnt... how do I do that?
View 1 Replies View RelatedHow do I change the default settings for the layer mask, as I'd like to swap black and white color.
View 3 Replies View Related i've to list all layers and objects in the drawing. I've got 2 checkedlistbox, one for layers, the second for objects.I've got 2 buttons, one up, one down, for swaping order. I've no problem with objects, but it seems a little more complicated with layers.I use this code to swap:
Using tr As Transaction = db.TransactionManager.StartTransaction Dim id1 As ObjectId = listLayerID(CB_List_Layer.SelectedIndex)Dim id2 As ObjectId = listLayerID(CB_List_Layer.SelectedIndex + 1) Dim first As DBObject = tr.GetObject(id1, OpenMode.ForWrite)Dim sec As DBObject = tr.GetObject(id2, OpenMode.ForWrite) first.UpgradeOpen()first.SwapIdWith(id2, True, True) tr.Commit() end using
id1 is the ID of the first layer, and id2 the id of the second layer. ListLayerId contains IDs of all layers. CB_List_Layer is my CheckedListbox.When is swap 2 layers, it don't swap objects in the layers. (ex : What i've got now :
Obj1, Obj2 in layer0 and Obj3, Obj4 in layer1 SWAP
Obj1,obj2 in layer1 and obj3,obj4 in Layer0.It's not what i want. I want :
Obj3,Obj4 in layer1 and Obj1,Obj2 in layer0)
Basically at some point or another, maya swaps back to the default hotkey layout. Im not quite sure how or why. Sometimes it takes an hour before the problem arrives, other times minutes. Its not permanent tho, restarting the app will fix it.
I've tried deleting second language, installing keyboard software, searching for alternative pref. files etc., and no, capsLock is not on ^^.
I can't get started - I have downloaded GIMP 2.8 but can't get it running as I get this error message:
"USER Installation Failed.
The GIMP user installation failed; see the log for details. It appears that you are using GIMP for the first time. GIMP will now create a folder named '/Users /andrzejnowosielski/Library/Application Support/GIMP/2.8' and copy some files to it.
Creating folder '/Users/myname/Library/Application Support/GIMP/2.8'..Cannot create folder '/Users/myname/Library/Application Support/GIMP/2.8': Permission denied" myname is my full name not myname......
I am using a Max with OSX version 10.7.5..I have checked all the relevant folders and made them all Read Write..I have tried making the relevant folders manually and re-starting GIMP but same message.
I have 2 files and I'd like to copy a titleblock from a template drawing and use it to replace an existing titleblock on an in progress drawing. The titleblock on the in progress drawing has attributes, and I'd like to keep them when I put in the new titleblock. The attribute tag names between the 2 titleblocks are the same.
I do not know the exact names of the titleblocks, only that they contain the words "title block" somewhere in their name.
I've developed for Inventor for a while now, but I'm completely new to AutoCAD. How might I go about this?
I believe the basic steps would be something like this:
1. Identify which object to copy from template sheet.
2. Save that object to memory
3. Identify object to replace in existing drawing
4. Copy attributes and get position of existing titleblock
5. Delete existing titleblock
6. Insert new titleblock and copy in attributes
I've taken the Autocad tutorials, and I've searched for relevant posts on ThroughTheInterface. Is there someplace else to look which might give a more in-depth example of what I'm trying to accomplish?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
if i took 2 different photos of the same person and one facial expression was better than the other photo can switch the faces in the pictures?
View 4 Replies View Relatedany gms or script to swap files hor as well as vertically.
For instance, left side circle and right side rectangle if you swap horizontally then left side comes rectangle and right side comes circle.
[ URL]............
One of the problems we face in 2010 is the part labeling issue, where it labels the family name for a part and not the description name. The way to get around this was to do a swap part. Well for me when i lay out a storm network, i create it by pipes only and then swap the parts that i need to. The only flaw about this is that you can only do one swap part at a time.
Well if you go to civl3dreminder blog site there is a fix for that. I actually tried it and it worked. I was actually able to swap pipes and structures at the same time. This routine will definitely come in handy.
Swap parts is not working for my structures. When I swap a structure it becomes unselectable and if I close out the drawing and re-open it the part is gone. I am running C3d 2012 64 it with the latest SP. I've attached the drawing.
View 2 Replies View RelatedThere is no custom transition in Smoke 2013.
I try to do so by creating an axis transition and match the contents.
It just matched the whole clip with wrong in and out point.Then I try to swap something with the transition.It said two targets of the same type is required.
Does the Swap Effects work for transitions?
It is pretty simple and smooth in Smoke 2012.
I just want to ask if its possible to swap or change the models wich are used by the new populate function? The texture can be changed when i overwrite the original ones in the temp folder. Is that true?
View 1 Replies View RelatedStart up Gimp and get an error message as follows:
Unable to open swap file. GIMP has run out of memory and cannot use the swap file. Some parts of your images may be corrupted. Try to save your work using different filenames, restart GIMP and check the location of the swap directory in your Preferences.
When I check preferences, the path to the swap file is not correct. My path is user to Application to Application Support to Library to Gimp.
I didn't know what to expect but when performance went from bad to worse and each click on LR resulted in (not responding), I became very concerned. I did research and couldn't find anything so I looked at my swap file and tweaked it. I added swap files to all of my drives, physical and virtual. For now that seems to be working.
My 32 bit W7 has 4gig of RAM installed.
I'm using Lightroom 4 on a shiny new 27" iMac and have a very old Dell 24" display, not LED backlit, as a secondary display. Both have been calibrated with a Spyder 3. I would like to preview photos on my iMac display by default and use all edit controls on the old Dell display but setting this up is a pain in the butt and it won't return to this configuration after I quit LR and open it again.
Even when I right-click on the dock in OS X Mavericks and select "Options/Desktop on Display 2" I only get the splash page on Display 2.
Is there any way to make LR open by default on the system's secondary display (Dell 24") and use the iMac itself as LR's secondary display?
I know there must be a way to change the colors of multiple objects without doing each one manually. But I am not finding the instruction. Say I have 17 parts of a drawing that are blue, and decide I'd rather have them blue/green.
View 5 Replies View RelatedIs there a swap color hotkey in photo paint? I look in customization, din't found any.Is there a way to delete a pixel?
View 2 Replies View Relatedmem-swap.jpg
I noticed these two options in the status bar . what are they... how they work. i dragged into my toolbar and showing that memory allocated and swap space.
First, I'm using Linux Mint 14 and just had to do a re-install. Since then I have the following messages when I open Gimp
"To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/home/todd/.gimp-2.8")"
and
"Could not create temporary file for '/home/todd/.gimp-2.8/gimprc': Permission denied"
I assume this isn't a good thing and would like to get it sorted out but don't know quite how. Yes I've re-installed Gimp, no change.
I'm experimenting with a digital IR camera. The images are very "magenta" in color and everyone states to simply "swap the Red and Blue" color channels. How can this be done in Paint.net? Is there a plugin that would process IR color pictures?
View 5 Replies View RelatedI am running Autocad 2012 and I tried to use the block swap command under the Express Tools. After selecting the block that I want to replace, I get an error stating that the block name contains an invalid character. The name contains invalid characters. The name is: DomeCamera_WallMount, but in the command bar it says object name:*U302. The * is what Autocad doesn't like.
View 5 Replies View RelatedI routinely use stroke profiles to modify stokes that also have a brush appearance. When I change the brush, the profile is lost. The only way I found, to keep the stroke profile, is to save the profile before changing the brush appearance, then reasign the profile. I wonder if it is a programming oversight that deletes the profile from the stroke in this case.
I also would like to see a better method of saving/updating/editing stroke profiles. There is currently no way to overwrite a profile. Again, an oversite, in my opinion.
Stroke profiles should be available in a panel, similar to brushes. They are powerful effects, but poorly implemented.
I'm still working primarily, in CS5, but I think these features have remained the same in CS6.
I'm trying to swap symbols in situ by changing the 'name' property of the symbol instance.
My rudimentary script can find the existing symbol name (for me, that's a small triumph!). The Illustrator document has two symbols in the Symbols panel, 'blue_square' and 'red_circle'. I run the script with an instance of 'blue_square' (and nothing else) on the page, and try to change the name to 'red_circle':
var docRef = activeDocument;
var symbolitem = docRef.symbolItems[0]
var symbolname = symbolitem.symbol.name;
var newname = "red_circle";
symbolitem.selected = true;
// this next line causes the problem:
symbolitem.symbol.name = newname;
This causes an error - 'the name is in use'.
I have been searching for some information on how to pass objects into a function so I can mess with their properties. Somehow I haven't been very successful. Anyway...What I want to do is take two items (light fixtures) and swap their positions on the drawing. It seems like it must be really simple, but I'm just not finding the key puzzle pieces to do it. It seems like if I could figure out how to pull two objects into the function (whether by selecting them and running the function or by selecting them after I run the function) I could very easily save the coordinates of one to variables and then just swap them.
View 9 Replies View RelatedI took a series of photos (9 shot vertically) of the lobby of AKL. I made adjustments in Bridge (3.0.0.464) then choose Photomerge through tools in Bridge to process the pano in CS4 (11.0). The images were processed for the natural light. Follow the link to see what CS4 came up with. The files were .dng processed with CS3. I have made many other photomerges using this combo, but this is first to achieve this type of result. In CS4, I used the vignette and distortion options.
View 18 Replies View RelatedI'm using Photoshop on Vista 32. When I try to do a photomerge either from PS or Bridge, it does its stuff, then closes everything immediately. Reboots / changed options make no difference.
View 17 Replies View RelatedWhen i run a Photomerge (using jpegs) i have even tried using the sample jpegs that come with the software of the SF skyline.
I select my images, and it runs the usual sequence of starting the layers and merging then when it ends its just dissappears looking like the software has just opend with nothing happening.
Ive tried every combination to make them work and nothing.
i never get to see any results.
I am using CS4, and ive also tried in CS3 again which is still installed on my partition. and its not working in that either. it used to work with no problems bit not now.