what is the best way to make exactly those chairs and table. The colors are not that important but the shapes. I am still a beginner in Autocad and the version i use is 2009. Here's the attached image.
Image11.jpg
I have table, several chairs and some glasses and plates on table. I want to group them and instance that group, hundred of times. Problem is that I do not have materials implemented and I will not until client is satisfied with arrangement. I have problems later, even using many scripts I found, to add material to all instances. Only way is to select one by one.
Other thing is that there might be new objects added into set, so best way would be to add to master group and that will be added in instances of that group automatically, but that does not work with Maya.
I am working in an events organisation that uses AutoCAD to do room drawings for clients. the Event managers are new to CAD and only need to have access to move tables and chairs around a drawing. So we have set them up with pallets.
I have created a profile with the workspace they need on the network, I having trouble getting the customised profile to come up as the default, instead the Vanilla profile comes up and I have to go into options to change the profile to the Company one.
Where do I need to change it so that it chooses the profile I have made first? or should I be doing this a different way?
I've created a table in a layout. I have the alignment set to middle center, but some cells in the table will show middle center then the data will be entered top right. I'm stumped as what to try next.
View 2 Replies View RelatedTo workaround the missing API for creating Parcel Area Tables, I have tried the following:
1. Create a "pick point" selection set (using ObjectARX), containing the Parcel for which I want to create a table.
2. Execute the AddParcelTable command.
3. Programmatically push the Select Parcel-button and the OK button of the Create Table dialog using win32 API.
When the Select Parcel button is pressed, the label next to it displays 1 parcel(s) selected and when the OK button is pressed, Civil prompts the user to pick the upper left corner of the table, but the prompt is immediately interrupted with the message "Invalid 2D point" and the table creation is aborted...
how to create a new Table Style definition.
I don't want to create a table on a sheet, I want to define a new style and then assign the style to the existing table.
I have no problem assigning the style once it is defined in the drawing to the existing table.
Dim oTableStyle As Inventor.TableStyle oTableStyle = oDrawingDoc.StylesManager.TableStyles("BOM") Dim oTable As Inventor.CustomTable oTable = oSheet.CustomTables.Item(1) oTable.Style = oTableStyle
There doesn't seem to be a TableStyles collection with an add or create event. I stumbled upon the "TableFormat" object but that seems to only override an existing style.
looked at the "StylesManager" but again I am not finding a create method.
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
How to create hole or drill chart table in AutoCAD LT 2014
View 3 Replies View RelatedI am trying to create a table that will incorporate info from structures and pipes. In C3d 2010 I want to make a CB chart which will show the pipe size, starting structure and invert. I would also like to include the CB rim elevation but that would be under the structure table. Is there any way I can combine the RIm elevation with the pipe table?
View 4 Replies View RelatedHow would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
Using Set Sheet Manager, I am trying to create an Office Standard Sheet Index Table.
I have begun by copying the Standard table and modifying it. I have adjusted the cell styles to reflect our colors and text types and sizes. I have also added two additional columns for revision number and revision date.
I have tried saving the new table ... and inserting a new table through the sheet set manager
the only tables i can bring in include the 2 original columns (sheet number and sheet title) and specified text font, size and color are maintained, but the additional columns and the column width are lost.
Ideally i would like the office format to be maintained...with little or no modification required of the user.
I'm trying to create a stage-storage table with six closed 2D polylines. They highlight when I select them, but nothing is loading in the Table?
View 8 Replies View RelatedI want to create a table with all characters inside a font.I used "%%" to change a number to it's character.but "%%" limited to 999 and for numbers bigger than 999 it doesn't work.
also, CHR command limited to 255 and for numbers bigger than 255 it change to (number-255). so I used "%%" to create this table:[Please change default font in your AutoCAD to ARIAL]
(Defun c:charmap ()
(setvar "cmdecho" 0)
(setq cnt 1.0)
(setq r_cnt 0.0)
(setq ts 32)
(setq x 0.0)
(setq y 0.0)
[code]...
I want to know:
1- what can I do for numbers more than 999?
2- How can I know the number of characters inside a font?
3-how can improve my LISP program to have complete characters inside the fonts?
I want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
Is there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
With all the DTP tools. Is there an easy way to create a text table - like a table in word
View 9 Replies View RelatedI am looking to create a table first of all which needs to be able to container text etc.
After that, ill be looking to create a mix of orange types to fill the top main title boxes and the same but lighter for the rest of the box.
But how would i about doing any of this such as creating a table, mixing colours etc?
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedIn our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies View RelatedI'm having trouble trying to figure how to create a mini TOC in a book. The content of the book is divided in 6 files.
Sample of how it looks likes
1) - Front cover (Pg 1)
2) - EN (Pg 2-20)
3) - SE (Pg 21-40)
4) - DE (Pg 41-60)
5) - FR (Pg 61-80)
6) - ES (Pg 81-100)
From file 2-6 they have their own TOC. Simple and it works, since each file have their own list.
I'm trying to create a small TOC on the front cover telling me each page numbers for each language file/chapter.
EN............2-20
SE..........21-40
DE..........41-60
FR..........61-80
ES........81-100
At the moment, I do it manually. But, maybe there is no simple solution....
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies View Relatedis it possible to create a style for formating cells in a table in CDX6?I mean to format aligninig, text formating /font, margins and stuff like that?
Now I have to do a infoguide for my city and have to put in a lot of info - restaurants, hotels etc. Probably 300 and more and the best way is to use the great table tool. BUT it will be fatastic if I can format cells with style because with easy I can import xls file in Corel and the good news is that it recognise it as a table so the formating is the next step.After that selecting cells, changing fonts, margins etc. is a painfull job to do.
Say I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies View RelatedIs there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedWe have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
I've been using the ado_lisp method to create a table and populate it from an access database with mixed results. Any VBA routine to create a table to share or a good source of information?
View 3 Replies View Related
