AutoCad 2D :: Can't Select Text In Whichever Space Previously Saved In
Dec 29, 2010
I use AutoCAD 2005, and I've made project logs which contain mtext for logging work I do each day, and tables for logging Revisions and prints and whatnot related to the project. I've noticed, especially since adding the tables to the log template, that sometimes I cannot select the mtext, but if I go to paperspace and doubleclick in a viewport, I can select it, and once I do that, and move the text and then move it back, I can go back to modelspace and select it just fine. Right now I have one particular project log dwg file that does this every time I open it, and if I save the drawing in modelspace, the next time I open it, I have the problem in modelspace, but if I save it in paperspace, it's the other way around and I can select it in modelspace. Does this have something to do with a bug in the tables? The problems seemed to have started once I implemented the tables. I've also noticed that when I layiso defpoints, I can't select anything on defpoints; I'm not sure if that's related or not.
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
When loading a previously saved item the preview shows the "complete job lot" however when you load the item it does not load the full drawing and is missing approx 3 hrs of work.
how to load the full document, I have tried the recovery manager which only loads the part document
Below is a picture of the preview working fine
Below is a picture of CAD not loading the full document up
So I spent 4 days working on a profile last week. And this morning I opened it up and accidentally erased the alignment, saved and closed the drawing (I must have thought it was in another drawing, and I wasn't paying attention).
Now the profile is gone and I'm wondering if I can open up a drawing that was saved before I did this mix up. I checked my autosave path, but the path doesn't exist. So I don't know where it's be autosaving to.
I was trying to save a large file as a Photoshop PDF and my program crashed. I was lucky enough to have saved this file in both a JPEG and PNG format onto my desktop but now once I move the files back into Elements, I have no history and no layers?
i have a text saved in PNG is a text designed with an image.how can i select the outline in illustrator? in photoshop i need 3 click, open it, click rapid selection and click the image = done in illustrator what i have to do? i am capable only of open the file...
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
I have been working on a set of residential drawings. I Have read several different ways to achieve text size when plotting.
I currently have all my text and dimscale set to 0" height. I have the 'scale dimensions to layout (paper space)' radio button checked. However, I cannot see even the slightest hint of test when looking at my screen. I sent a dwg to a friend of mine who plotted it. no text was visible. What height should I set the text to in order to achieve an 1/8" tall plotted text? I cannot see text in either the model space or in the paper space.
I have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
I've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
Are there any plans to add the simple yet productive feature of moving an object in the X and Y directions at the same time?Also, I would love to be able to select the ceiling grid and hit the space bar and have the grid rotate 90 degrees.
Any way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.
So if the background (by background I don't mean the background layer, this is all one layer) is completely white, and I've got part of the image selected, is there a way to move just the selected portion while having pdn fill in the background instead of leaving it transparent/empty?
Basically we have a number of different procedures that need to be written in each drawing. Each drawing uses one of 5 or so procedures. Usually we type it out every time which is a pain or copy paste. We also tried making word documents and inserting them that way but it got a little buggy. Is there any way to have 5 or so pre made text blocks to pick which to insert onto different types of drawings but that can be global used across a few systems?
We have a small group of workers all on the vault server. Basically I just want to be able to have a finished drawing. Click something that will open a list of my pre made text blocks, and insert one into the drawing that I can scale etc. We use Inventor 2011.
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
I have done a drawing of some house plans. I am now trying to enter text in model space, but when i enter it, it appears very small at 2.5, only if i enter at 500 it appears ok. In the layout tab the text at 500 appears very large, and when i enter 2.5 it appears ok. I have not made any changes anywhere.
We are doing tank drawings and the company now wants a custom format/style of table (attached as jpg) to be on all the drawings (which are complete already) which will be the cleanest way to get a table like that. I tried making something in Excel and inserting as a Gen. Table, but each of the cell borders show up.
Would I just do a sketch and insert text boxes where necessary?
