I was trying to save a large file as a Photoshop PDF and my program crashed. I was lucky enough to have saved this file in both a JPEG and PNG format onto my desktop but now once I move the files back into Elements, I have no history and no layers?
View 2 Replies
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
When loading a previously saved item the preview shows the "complete job lot" however when you load the item it does not load the full drawing and is missing approx 3 hrs of work.
how to load the full document, I have tried the recovery manager which only loads the part document
Below is a picture of the preview working fine
Below is a picture of CAD not loading the full document up
Autocad 2012 not all document.jpg
I Keep having this reoccuring problem today - white lines keep appearing attatched to certain & all layers in photoshop files that I have, the only solution that seems to get rid of them is to put a mask on the layer and mask the line away, these are appearing on text, smart objects & rastersized layers.
They were not there when I previously saved the file and they should not be there now, I then went to open another file I had and white lines started to appear on the files. This is really frustrating because some of the website documents have alot of layers. I have attatched an example below, they only appear to be 1 pixel and can range up to 2500pixels wide and they overlap making the line look thicker sometimes.
So I spent 4 days working on a profile last week. And this morning I opened it up and accidentally erased the alignment, saved and closed the drawing (I must have thought it was in another drawing, and I wasn't paying attention).
Now the profile is gone and I'm wondering if I can open up a drawing that was saved before I did this mix up. I checked my autosave path, but the path doesn't exist. So I don't know where it's be autosaving to.
I recently upgraded from PSE5 to PSE12. The installation went smoothly and my old Catalog was imported without a hitch. After my first test run to edit a file, I did a "Save As" in a version set with the original. I then closed the file, but when I went to the organizer, it was not there. When I go to the folder in Windows Explorer, the edited file is present - I just can't get it to appear (alone or in a version set) in the Organizer. (FYI, I am running Windows 8).
View 3 Replies View RelatedI use AutoCAD 2005, and I've made project logs which contain mtext for logging work I do each day, and tables for logging Revisions and prints and whatnot related to the project. I've noticed, especially since adding the tables to the log template, that sometimes I cannot select the mtext, but if I go to paperspace and doubleclick in a viewport, I can select it, and once I do that, and move the text and then move it back, I can go back to modelspace and select it just fine. Right now I have one particular project log dwg file that does this every time I open it, and if I save the drawing in modelspace, the next time I open it, I have the problem in modelspace, but if I save it in paperspace, it's the other way around and I can select it in modelspace. Does this have something to do with a bug in the tables? The problems seemed to have started once I implemented the tables. I've also noticed that when I layiso defpoints, I can't select anything on defpoints; I'm not sure if that's related or not.
View 9 Replies View RelatedI'm having some problems properly opening an Illustrator Template file in CS3 that I saved when I was using CS5 (I use CS6 now). My co-worker uses CS3 and can't open the template I made using CS5. I haven't found an option anywhere to be able to downsave the template file to an earlier version. allow my co-worker to open the template file without having any compatibility issues?
View 1 Replies View RelatedI accidentally saved my PS file with merged layers, then quit. I can't believe I did that! Is there any way to reverse it?
View 2 Replies View RelatedI have a problem with the PSD file, size 228 MB. When electricity turned off, my computer shut down then I turned on it and opened the PSD again but there was only one locked layer filled in black and no other layers. I can not see other layers that was saved before. and here is red line on the top. How can I return my works back?
View 2 Replies View RelatedI have cdx5 (fully patched) running on a windows 7 pro x64 machine (c++, directx, updates all current) that has an issue when saving a file to a mapped network drive. The file will save error free but when you try to open the file again at a later date it gives a c++ runtime error (this application has requested the runtime to terminate in an unexpected way).
If i save the file locally then move it to the network share it seems fine. It can be opened and edited with out issue.
CDx5 needs to save to the mapped drive as the server runs onsite and offsite backups. There is a large volume of files that are changed/created daily. Saving locally and then copied to the server manually is also not an option as the user cannot be relied upon to ensure the files are copied to the server.
I made this two different small project yesterday. Now, opening them and I see nothing in the content area and no time line at all, no assets or symbol shows. It is as a new satring file. I tried opening the html file as well but got the same result. I still can run the html file and see my project but can not open them in Animate and do any modification.
I am on a Mac and installed all the software a few days ago.
When I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedWe all hide and unhide things constantly as we work.But when you do a Show All (CTRL+ALT+3), to effectively unhide all hidden objects, is there a way to do so without unhiding all hidden sublayers as well.
When I do a Show All, even sublayers that were hidden when the file was opened (and never unhidden) unhide along with all hidden objects.
because the specified color book cannot be found? The file is opening without any colors and as i am trying to set the file up to print, it is VITAL that i have colors.
View 1 Replies View RelatedI am downloading Tiff images from a partners website. After extracting the file and opening from Photoshop CS5.1 it's only displaying one of the original image layers. For example and image with two guys shaking hands in an office is only opening the clipped two guys and not showing the backgroud. The vendor says the files open fine on their end which leads me to believe its a download or photoshop issue.
View 2 Replies View Relatedif there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies View RelatedWhen I edit a picture and save the result (using either "save" or "save as" and making sure there are ticks in "Save in Elements Organiser" and "Save in version set with original"), the edited copy is often (perhaps 3 times out of 4) treated not as a new version but as a new file. When I close the edit, I am told that there is a new file in a watched folder. When I accept this, I am offered any tags which were applied to the original (which works a bit) but then have to find my way to the edited file and the original, and manually make them into a set. It adds a couple of minutes to each edit. I am using Photoshop 11 on a Windows 8 laptop with a 1000GB hard disc (with about 100GB free). My catalog is quite big- about 70,000 items. I am a long-time Elements user (since the original?). This problem is fairly new (ie months not years)- certainly since I moved to V11. This is independent of the format of the original (in my case, RAW or jpeg) or the edited file (in my case usually jpeg).
View 6 Replies View RelatedWhy does Photoshop Elements 11 open files in a lower resolution than I saved them?
View 1 Replies View RelatedWhen trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
I'm new to photoshop. Why did some of my altered pictures not show up in the file? They appear as a blue file with PSD on it. You can see the pictures when you click on them in Photoshop elements 10 but not in your file.
View 5 Replies View RelatedI am trying to print a photo on my Canon MX870 that has been edited (cropped and a few slight lighting changes) in Elements 9 , the colours look good on the screen but when I print it looks different, . I have the colour settings from the Edit menu set to "always optimize for printing". The file information shows the camera data as colour space sRGB.
I am using canon inks (all full) and canon matte photo paper and I selected the matte photo paper on the paper type in printer settings.
I have printed good photos before on this printer (I think using photo gallery) but was not using photoshop elements at the time. Does it make any difference if the photo is saved as a jpeg file or a pse file?
Recently upgraded from PSE 7 to PSE 11.
Now I'm unable to open .tga files I created/saved in PSE 7.
I created a slide show in Elements 9. the show worked normally when viewed as a slide show, but when saved it as a wmv file, some of the pictures were completely black. How can I correct this ?
View 1 Replies View RelatedBasically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
I don't have this problem on all my files, only a select few. When i save a file and reopen, all the viewports in which I have frozen layers are all reset. All layers are turned back on and I have to go through every viewport and refreeze layers. This problem has persisted long enough that I unfortunately know when I close a file I will have to reorganize the layers next time I open the file. Is this a setting issue or this a bug in the file?
View 3 Replies View RelatedI've upgraded to Photoshop CS6 and I noticed immediately that it has no option to use the Add_001.howto file that I was using in the previous version. Is there a stand alone application or method to access this file so that it would be convenient to view the previously saved tutorials that I created?
View 2 Replies View RelatedI removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies View RelatedSpent 9 hrs creating a slideshow that I saved. Closed PSE 11 and reopened and can no longer find the slideshow. When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large". Is this my slideshow and if so how can I recover it?
View 1 Replies View RelatedHad to reinstall PS elements 8. I used the menu feature "File - Get Photos & Videos" to reload my previously tagged photos. The photos reloaded but absent the tags - can I recover photos with the tags attached?
View 1 Replies View RelatedHow do I display previously created subcategories under keyword tags in PSE10. A double click on the icons does not work now.
View 2 Replies View Related
