trying to find a .net DWG viewer component that actually works. I tried DWG Viewer from SkySoft and cannot get it to register in VS 2010, I downloaded and installed SolidWorks eDrawings viewer and tried to use that. I could not get that to register and place the control on the toolbox. I also tried TrueView and I'm beginning to thing it can't be done. It seems like this should be fairly easy but it's not.
All I want is to be able to display the .dwg drawing on a Windows form. I have a .net WinForms app that I would like to show the drawing to the user. I already have the bitmap preview and would like something larger.
I am using Visual Studio 2010 on a Win 7 64bit machine.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012 Dell Precision T7500 Workstation Xeon Processor 16 GB of RAM Nvidia Quadro FX 5800 Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf. [code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
We have someone who doesn't need any cad fuctionality just the ability to view dwgs and occasionally print. I got to looking and found there are various versions of free DWG viewers. What is the easiest one to use? Esp for someone who doesn't normally use cad?
We've a customer using Inventor and Inventor Publisher. They ordered an iPad sales support App from us. Is there a programming library for iOS available with the same visualization component as the IPM Viewer App that we can integrate it in our App? If yes, how to get it? If no, how do I get into contact with the product management?
I somehow managed to turn on the 'Metadata Viewer" window, and cannot figure out how to make it go away. I can close the window, but every time I switch drawings it re-appears in its previous location. How to turn it off permanently?
"Open in viewer when done" is checked. I've unchecked it and rechecked it but the Adobe Reader does not launch after plotting in background completes. It does launch when plotting directly to the DWG to PDF.pc3 plotter. What am I missing?
I'm working with AutoCAD 2012 x64 and I need a control to view DWG files selected in my ListView. I tried using DWG True View 2013 and it worked well, but this is more than my requirement. My requirement is to simply show a preview of the drawing. But DWGTrue View is an advance control and is not standalone i.e. Users have to download and install its full installer.
This might require some customization to code in order to fix TOP View and do a Zoom Extent: Currently not succeeded.
I also seek using DWGThumnailviewer.ocx referenced in this post but unfortunately, I couldn't find DWGThumnailViewer.ocx with AutoCAD 2012. I guess it was discontinued.
Other option could be to generate a raster graphic file (*.jpg, *.gif, *.png, *.bmp) and display that into a picture box. I tried some code from this thread and this one but at some small dwg files, it is unable to read bytes.
I have some objects (corridor / intersection corridor / surface / grading ...) in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point about (0,0,0, or any place x,y,(z=0)..So rotated 3d object (if the Z= High value) can't be seen / can be seen as a point.
how to change the object viewer pivot point ? (not using steering wheel or zoom extents because of first time rotating objects seen so far )
Is Autudesk Express Viewer still available. I need a viewer to insert in my web page so prospective clients can see some of my floor plans. Marking up is not a need.
Any way to change the setting in Object Viewer that will let you orbit around the cursor instead of the center of the screen? In object viwer, orbit is only constrained around the middle of the screen. To me, it would make sense to have it rotate around the cursor like in model space.
I have used the object viewer of my surface and selected conceptual visual style. I save the image as a .png file for a presentation. Is it possible to have the area that there is no surface to be black and not white? Other than opening it up in paint?
In model space I grab my tin, then object viewer. Everything comes up then immediately on rotating my vie win the object viewer the surface disappears.
We have a number of remote users who must have access to our files via Inventor Viewer. When reviewing the system requirements for Inventor Viewer 2014, I noticed that it lists only Windows 7 and Windows 8. Was XP omitted by mistake, or will Inv Viewer truly not work on machines running XP?
When I use Object Viewer to look at just feature lines and surfaces, the feature lines do not appear at the same elevation as the surface as I shift the view around. Why is that- especially since I am looking at the surface I created from those same feature lines?
is that a feature, intended to make it easier to discern the feature lines in Object Viewer? Or a quirk of my video card?
Today I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.
Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?
I have an addin with a palette that include some datagridviews.
I show in these datagrid, properties and information about all alignments in drawing.
With event commandEndend I can update all information if I use "grip-strectch" for some PI alignment.
However, we can modify alignment data from Panorama palette (geometry editor) and I would like to know if there are any event to catch it after modify data.
I have the same trouble that this post:
[URL]
Autocad Civil 3D 2014 +SP1 Quad Core Intel i7 3770-cpu 3.40Ghz. ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd 32gb RAM 1600 Mhz. nVidia Quadro 2000. Win 7 Pro 64bit
I'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
I've been using pipe network in Civil 3D for some time now and all I can say is I can't wait for them to rewrite it!
I've had acouple of problems with some of the default parts for the UKIE template which I have managed to fix manually but there is stil one problem I can't seem to solve. For some reason my type E manholes show up in plan and section but don't show at all in object viewer. I've even tried to create a new drawing and place a new network but again the same thing happens.
I've tried going into part builder, validating it and saving it, reload the catalog etc. just incase.
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
I have Photoshop Extended as part of CS4. I am trying to open RAW files from my Canon 5D Mark II for batch processing. Each time the RAW file is opened it brings up some form of viewer where I need to click OPEN Image. This prevents me from automating my actions on multiple files.