AutoCAD Civil 3D :: Corridor Connecting To 0,0,0 In Object Viewer?

Aug 6, 2013

I keep having my corridor connect to 0,0,0 in only some areas. What Is making civil 3d do this? 

Civil 3D 2012 SP3
Civil 3D 2012 SP3

View 2 Replies


AutoCAD Civil 3D :: Event Viewer Error Message When Rebuilding Corridor?

Nov 6, 2013

I'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor.  I've checked the two target alignments that I'm using and they are on the correct side. 

Civil 3D 2014

View 2 Replies View Related

AutoCAD Civil 3D :: Object Viewer Pivot Point

Oct 5, 2012

I have some objects (corridor / intersection corridor / surface / grading ...)  in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point  about (0,0,0,   or any place x,y,(z=0)..So rotated 3d object (if the Z= High value)  can't be seen / can be seen as a point.

how to change the object viewer pivot point ? (not using steering wheel or zoom extents  because of first time rotating objects seen so far )

View 3 Replies View Related

AutoCAD Civil 3D :: Change Settings In Object Viewer?

Nov 29, 2012

Any way to change the setting in Object Viewer that will let you orbit around the cursor instead of the center of the screen? In object viwer, orbit is only constrained around the middle of the screen. To me, it would make sense to have it rotate around the cursor like in model space.

View 2 Replies View Related

AutoCAD Civil 3D :: Object Viewer Image Of Surface

Aug 15, 2013

I have used the object viewer of my surface and selected conceptual visual style.  I save the image as a .png file for a presentation.  Is it possible to have the area that there is no surface to be black and not white?  Other than opening it up in paint?

see attached. 

View 1 Replies View Related

AutoCAD Civil 3D :: Surface Disappearing From Object Viewer

Feb 21, 2012

In model space I grab my tin, then object viewer. Everything comes up then immediately on rotating my vie win the object viewer the surface disappears.

Win 7 64bit
16 Gigs Ram
Intel i7 870
Quadro fx1800
C3D 2011/2012
ASUS Custom
Dual 24 Phillips screens

View 2 Replies View Related

AutoCAD Civil 3D :: Feature Lines / Surfaces And Object Viewer

Jul 19, 2013

When I use Object Viewer to look at just feature lines and surfaces, the feature lines do not appear at the same elevation as the surface as I shift the view around.  Why is that- especially since I am looking at the surface I created from those same feature lines? 

is that a feature, intended to make it easier to discern the feature lines in Object Viewer?  Or a quirk of my video card?

Win 7E 64-bit, Intel i7, 12 GB
C3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Surface Triangles Not Appearing In Object Viewer

Mar 7, 2013

Today I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.

Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?

using Civil 3D 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Material Does Not Show In Layout But Shows In Object Viewer

Jan 11, 2013

Attach is the a showing 3 surfaces on a site . How do i embed a  material on a surface on the layout page/mode.

In Object viewer it shows clearly the rock material on the surface.

View 1 Replies View Related

AutoCAD Civil 3D :: Object Viewer - Realistic Style - Loss Of Quality

May 2, 2012

For some reason, when I view my corridor in Realistic mode in object viewer, all the rendering has changed colours and quality of the textures etc.

It used to display just fine and I am wondering what has caused this? Is it a Driver issue?

I have attached an image of what it looks like now. As you can see the quality is really poor and the colours are wrong.

Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3

View 1 Replies View Related

AutoCAD Civil 3D :: Pipe Network Structure Not Showing In Object Viewer

Mar 6, 2013

I've been using pipe network in Civil 3D for some time now and all I can say is I can't wait for them to rewrite it!

I've had acouple of problems with some of the default parts for the UKIE template which I have managed to fix manually but there is stil one problem I can't seem to solve. For some reason my type E manholes show up in plan and section but don't show at all in object viewer. I've even tried to create a new drawing and place a new network but again the same thing happens.

I've tried going into part builder, validating it and saving it, reload the catalog etc. just incase.

View 3 Replies View Related

AutoCAD Civil 3D :: Multi View Blocks Displaying Incorrectly In Object Viewer And Paperspace

Apr 30, 2013

I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...

Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...

I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.

View 1 Replies View Related

AutoCAD Civil 3D :: Get Alignment Object From Corridor State?

Jan 14, 2013

i am trying to get the coordinate value for the current station in the subassemblies.

i found

Autodesk.Civil.Roadway.DatabaseServices.BaseBaseline.StationOffsetElevationToXYZ(ByRef Autodesk.AutoCAD.Geometry.Point3d) As Autodesk.AutoCAD.Geometry.Point3d

but how you get  the basebaseline?

in the alignment object there is no convert station to coordinate only coordinate to station. which is useless in this case.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 2 Replies View Related

AutoCAD Civil 3D :: Get Alignment Object From Data Referenced Corridor Surface

Oct 25, 2012

is it possible to get the alignment name which the corridor surface is built from when the surface is being data referenced. in other word no corridor as the middleman.

the way i see it is when corridor suface is referenced, it becomes a regular surface and loses some properties such as parent alignment.

i am still using COM. maybe .net can do it? either way works.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 1 Replies View Related

AutoCAD Civil 3D :: Make Corridor Intersection Object With Custom Subassembly?

Jan 8, 2014

I'm not having any luck on my own.  Can I use subassemblies that I create in subassembly composer to make an intersection using the "CreateIntersection" command? 

View 5 Replies View Related

AutoCAD Civil 3D :: Surface Corridor Is Not Triangulating Entire Corridor Boundary

Sep 14, 2012

I have created a surface from a corridor.  I set the boundary of the surface to the daylight of the corridor.  In some areas of the corridor the surface does not triangulate see attached.

View 2 Replies View Related

AutoCAD Civil 3D :: Copy Corridor Or Corridor Station Values Only?

Dec 13, 2012

Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.

Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.

View 9 Replies View Related

AutoCAD Civil 3D :: Corridor Surface Is Not Matching Corridor Top Links

Mar 21, 2013

My corridor surface is not matching my corridor top links.  see attachments.  this is affecting my volumes!

The section-plan(surface red).png is showing the section editor and the plan view.  the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.

The pdf is all my sections with the red linework being the corridor surface.

C3D ver 2012
Win 7, 64bit

View 2 Replies View Related

Illustrator :: Connecting And Cutting - Cut A Triangle Into Object?

Dec 12, 2013

How do I connect a circle and a square ?  How do I cut a triangle into an object?

View 14 Replies View Related

AutoCAD Civil 3D :: What Is Best DWG Viewer

Mar 24, 2008

We have someone who doesn't need any cad fuctionality just the ability to view dwgs and occasionally print. I got to looking and found there are various versions of free DWG viewers. What is the easiest one to use? Esp for someone who doesn't normally use cad?

View 6 Replies View Related

AutoCAD Civil 3D :: Connecting Separate Surfaces

Mar 3, 2013

I created a grading and a surface for a pond that is abotu 30' away from a roaway that has a seperate surface.  What would be the best way to connect the two surfaces?  I need a uniform slope from the edge of pavement to the top of berm of the pond.

View 9 Replies View Related

AutoCAD Civil 3D :: Merging Surfaces Connecting Grading

Apr 25, 2013

As you can see in my attachment, I have a emergency spillway coming out of a dugout wetland.  The fill area, the pool area, and the emergency spillway channel are all separate surfaces.  All three of these surfaces are created from gradings.  The fill was a feature line drawn around the top witdth of the dam, and then graded down to the Existing Ground.  The channel is another polygon feature line with elevations at each PI and then graded up to the EG.  The pool was a feature line I drew around the perimeter of my pool, laid on the surface EG, and then graded down to an elevation on a slope. 

I'd really like to blend all the surfaces together.  Right now, they are all separated with tiny slivers of Existing Ground.

How do I go about this?  As you can see, I'm still pretty green with gradings. 

View 9 Replies View Related

AutoCAD Civil 3D :: Error Connecting To HEC RAS-generated SDF File?

Nov 7, 2013

I have a HEC RAS model which I ran a steady flow simulation on, and then I tried to use the GIS Export button to get a .sdf file. When I tried to connect to the .sdf file in Civil 3D, I got these errors:

Failed to connect.

Failed to open FDO connection.

File is not an SDF file, or is an SDF file with an unsupported version.

An error occurred during SDF database access.

I played around with the settings I chose when I exported in HEC RAS and couldn't get any different results.

View 9 Replies View Related

AutoCAD Civil 3D :: Event Triggered After Modify Data In Panorama Viewer?

Dec 1, 2013

I have an addin with a palette that include some datagridviews.

I show in these datagrid, properties and information about all alignments in drawing.

With event commandEndend I can update all information if I use "grip-strectch" for some PI alignment.

However, we can modify alignment data from Panorama palette (geometry editor) and I would like to know if there are any event to catch it after modify data.

I have the same trouble that this post:


Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 3 Replies View Related

AutoCAD Civil 3D :: Gap In Corridor

Jun 13, 2013

C3D 2014

when I created a Top surface, C3D showed me otherwise. I need a gap at an intersection. In the attached DWG the intersection corridor has been removed from view by isolate.

I used 2 seperate baselines to force the road corridor to have a gap at the intersection.

Looked OK .. except ..later .. when I created a Top surface, only the first baseline is used to create the surface, the second baseline is skipped   : (

I obviously did not make a gap correctly. What is the correct way? Or.. is there no way .. must the designer create multiple seperate corridors when the road has gaps? 

View 3 Replies View Related

AutoCAD Civil 3D :: How To Get A Continuous Corridor

May 2, 2013

I have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.

View 4 Replies View Related

AutoCAD Civil 3D :: DWF Corridor Quality

Dec 29, 2013

I started playing around with 3d dwf's. I'd like to share my corridors in a 3d dwf viewer or something similar but when it opens in design review, everything is skewed/ jagged/garbled. The other problem is that it exports everything (assemblies, alignments, sections  etc.) so it make viewing navigation difficult in the viewer for people that aren't CAD savvy to begin with. It would be ideal if you could select what you want to export similar to exporting a wmf file.

How do others share 3d models with non-cad people?

View 1 Replies View Related

AutoCAD Civil 3D :: Where Is Corridor Surface

Mar 21, 2012

When i try to create a material list, i don't see my corridor surface - just the EG surface appear in the list.

View 2 Replies View Related

AutoCAD Civil 3D :: Add Subassembly To Corridor?

Nov 18, 2013

We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly.  The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified.  how to add a target for a sub that is added after the corridor was created?

Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver
Win 7 Home Premium

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment From Corridor

Feb 7, 2013

When creating an alignment from corridor feature (ditch invert level), the created alignment is not following the selected line (see image bellow). The alignment seams to be created from the first point of the feature line to the last point and ignores all the other points. The vertical alignment created at the same time seams to be correct.

View 1 Replies View Related

AutoCAD Civil 3D :: Creating A Corridor

May 16, 2012

I am trying desperately to create a corridor in C3D 2013.

I have the requisite Alignment, Profile and Assembly, yet when I create the corridor, either nothing appears, or it creates the corridor at incorrect elevations.  I have the proper elevations in my alignment.

View 7 Replies View Related

Copyrights 2005-15, All rights reserved