AutoCAD Civil 3D :: Feature Lines / Surfaces And Object Viewer
Jul 19, 2013
When I use Object Viewer to look at just feature lines and surfaces, the feature lines do not appear at the same elevation as the surface as I shift the view around. Why is that- especially since I am looking at the surface I created from those same feature lines?
is that a feature, intended to make it easier to discern the feature lines in Object Viewer? Or a quirk of my video card?
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
View 2 Replies
ADVERTISEMENT
Oct 5, 2012
I have some objects (corridor / intersection corridor / surface / grading ...) in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point about (0,0,0, or any place x,y,(z=0)..So rotated 3d object (if the Z= High value) can't be seen / can be seen as a point.
how to change the object viewer pivot point ? (not using steering wheel or zoom extents because of first time rotating objects seen so far )
View 3 Replies
View Related
Aug 6, 2013
I keep having my corridor connect to 0,0,0 in only some areas. What Is making civil 3d do this?
Civil 3D 2012 SP3
Civil 3D 2012 SP3
View 2 Replies
View Related
Nov 29, 2012
Any way to change the setting in Object Viewer that will let you orbit around the cursor instead of the center of the screen? In object viwer, orbit is only constrained around the middle of the screen. To me, it would make sense to have it rotate around the cursor like in model space.
View 2 Replies
View Related
Aug 15, 2013
I have used the object viewer of my surface and selected conceptual visual style. I save the image as a .png file for a presentation. Is it possible to have the area that there is no surface to be black and not white? Other than opening it up in paint?
see attached.
View 1 Replies
View Related
Feb 21, 2012
In model space I grab my tin, then object viewer. Everything comes up then immediately on rotating my vie win the object viewer the surface disappears.
Win 7 64bit
16 Gigs Ram
Intel i7 870
Quadro fx1800
C3D 2011/2012
ASUS Custom
Dual 24 Phillips screens
View 2 Replies
View Related
Mar 7, 2013
Today I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.
Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?
using Civil 3D 2013.
View 9 Replies
View Related
Jan 11, 2013
Attach is the a showing 3 surfaces on a site . How do i embed a material on a surface on the layout page/mode.
In Object viewer it shows clearly the rock material on the surface.
View 1 Replies
View Related
May 2, 2012
For some reason, when I view my corridor in Realistic mode in object viewer, all the rendering has changed colours and quality of the textures etc.
It used to display just fine and I am wondering what has caused this? Is it a Driver issue?
I have attached an image of what it looks like now. As you can see the quality is really poor and the colours are wrong.
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
View 1 Replies
View Related
Mar 6, 2013
I've been using pipe network in Civil 3D for some time now and all I can say is I can't wait for them to rewrite it!
I've had acouple of problems with some of the default parts for the UKIE template which I have managed to fix manually but there is stil one problem I can't seem to solve. For some reason my type E manholes show up in plan and section but don't show at all in object viewer. I've even tried to create a new drawing and place a new network but again the same thing happens.
I've tried going into part builder, validating it and saving it, reload the catalog etc. just incase.
View 3 Replies
View Related
Oct 15, 2013
I wonder how to get intersection lines between two surfaces in Civil3D API. It seems that the "MinimumDistBetweenSurfaces" command in Civil3D can do this work. But I can't find corresponding API.
View 2 Replies
View Related
Apr 30, 2013
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
View 1 Replies
View Related
Oct 23, 2013
So here's an odd one (at least I think it's odd ): I have a drawing that it utilizing feature lines which are projected to the cross sections to display R.O.W., easements, etc. However, every now and then (there doesn't appear to be any similar operation that causes this) the feature lines will change their location, in this case they typically seem to move north and east about 200'. I can't deuplicate the problem...it just seems to happen on its own.
I'm running Civil 3D 2013 with SP 2.
View 5 Replies
View Related
Jun 12, 2013
I have created a feature line from a survey which will be the inside shld of my new road design. I have created the feature line using my design elevations but need to add a PI and Elevation at a specific Northing. When I try to edit I can only seem to find the chainage and elevation but I also need to know the northings and eastings so I know where to insert my PI. I would like to just edit the table since I can't seem to figure out how to insert the PI. (I am new to C3D and still learning...) My final product will be a road with 2% crossfall and I intend to use offeset and grading features to accomplish my final design. How I make this edit...
View 1 Replies
View Related
May 13, 2013
I'm currently using the Autocad Civil 3D 2014 on daily basis for urban infrastructure design. When using Autocad Civil 3D 2013, I always would create feature lines from corridors and then export this file to a ACAD 2007 version, which would read the feature lines as 3D polys. The company's topographer could then use this file to make his markings on the field very easily.
Now, when I do the same process using Autocad Civil 3D 2014, the ACAD 2007 file won't present the feature lines as 3D polys, but as 2D polys. This presents a major inconvenient, because I now have to export the file to ACAD 2007, open it in Autocad Civil 3D 2013, rebuild the surface from the design contours and create a feature line from the design surface; export the surface AGAIN to ACAD 2007 and FINALLY I'll get the 3D poly my topographer can read.
View 9 Replies
View Related
Sep 11, 2013
I have a curb return that was drawn as a fillet and I added two points at the PC and PT. Is there a way to create a feature line out of this with the two points associated so that it will interperlate between those 2 points?
View 1 Replies
View Related
Feb 11, 2010
Over the past 6 months we have had the feature lines just up and disappear from the drawing for no reason. They were not erased. They just went away for some reason but the surface created from them was still there.
View 9 Replies
View Related
May 6, 2012
I am new to civil 3d. I am building a site down the side of a mountain which consists of 4 tiers/ pads with different levels. Each of the 4 pads has its own feature line. To prevent any confusion or attractions of the feature lines to each other i have moved them to a site that i created called temp site locations.
What is the best way and location to do each of these gradings and how do i tie them all back on to the same drawing ? I assume (maybe wrongly) to do each separately and copy back into the the real drawing.
Do i need to create a new site for each pad. If i do my grading in the temporary site when i bring them back to the real site will the interact with the other feature lines.
View 2 Replies
View Related
Aug 15, 2013
I have a created a surface from contour lines.I have drawn a feature line and assigned elevations (it slopes down from 3.5m elevation to 2m elevation). I have added grading from the feature line to the existing surface but have not merged the feature line with the surface.
I also have to make a low area (elevation at 1.5m) on the surface and know i need to grade at 1:1 from the feature line to the low point. Is there a way to grade from a feature line at a given grade (1:1) to a known height (my low point at 1.5m) without drawing another feature line for my low point? Seeing as the height of the feature line varies I can't just offset it at the grade.. I.e. the grade is the constant here.
I will have a few walls and lower / higher areas to grade to. I have drawn the top of my wall and mounds and have assigned them elevations but not sure whether to now make them all feature lines and try to merge with the surface by grading at a set grade or to do some sort of infill.
View 6 Replies
View Related
Apr 16, 2012
Is there a way to link feature lines to points? If I have a series of points and I've joined them with a feature line; I want the feature line to update automatically if I adjust a point elevation.
View 4 Replies
View Related
Oct 7, 2012
I want to hide feature lines in realistic view. I changed corridor's feature lines style as pic1 but i can still see feature lines (pic2).
View 1 Replies
View Related
Jun 14, 2010
I am using the Mill&Overlay sub set to overlay an semetrical road and a crown offset of zero. I one file the crown point feature line has gaps in it and in another file it zig zags along the road.
I forgot to mention that the triangles and the cross section look as expected. trouble is I want the crown profile
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 3 Replies
View Related
Feb 28, 2013
I've had cause to do some site grading by creating featurelines from scratch. What is the difference between gradient and slope (they are the same are they not?) when creating them as I always seem to go wrong when using this method??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 5 Replies
View Related
May 8, 2012
I would like to export feature lines out as land xml file. Can this be done in Civil 3D or is there another work around.
View 5 Replies
View Related
Oct 30, 2013
I brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies
View Related
Nov 7, 2013
I want to do this: URL...to get vertex of feature lines.However, I have to select a Reference:Autodesk.AECC.Interop.Land
Can I use that Reference for Civil 3D 2014? is there limitations for Interop in Civil 3D to feature lines?
I use(agreate) all these References Autodesk. AEC.Interop. BaseAutodesk. AEC.Interop. UiBaseAutodesk. AutoCAD. InteropAutodesk. AutoCAD. Interop. CommonAutodesk.AECC.Interop.<domain>Autodesk.AECC.Interop.Ui<domain>
View 4 Replies
View Related
Nov 26, 2012
I create a feature line including some arcs. While editing I need to redimension the feature line, but the arcs will lose tangency. Therefore I have to break/ trim/delete/manually edit the tangents until they intersect and then FILLET them to get a new arc. I tried EDIT CURVE with 0 Radius but it's not acceptable. Any workaround on this one (filleting feature lines like polylines or a closing option)?
View 2 Replies
View Related
Aug 29, 2012
I would like to add elevation values of start and end of feature line segments within a table. I can set up start and end co-ords but can't seem to find where I can add the levels?
I can add lables to the plan with levels but really would like to have a table as well as some of the segments are too small to lable on the layout.
View 1 Replies
View Related
Apr 17, 2012
I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white). At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between. The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.
In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280..This corridor builds clean - no error messages reported.
View 9 Replies
View Related
Oct 30, 2013
I have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
View 9 Replies
View Related
Jul 1, 2011
I have reason stumbled across the offset assembly functionality of corridors, and for the most part, I have been quite impressed. One thing that has come up that is odd to me that when I create a surface from the corridor using feature lines, the feature lines that are created by the offset assembly are not added to the corridor surface, even though they are visible and can be selected. When I create the corridor using links, everything is fine and the surface looks great. I can work using the links, but the more curious part of my nature is a bit tortured not knowing why this is happening.
On a related note, any strong preferences/reasons for using links vs. feature lines, or vice versa?
C3D 2014, SP1
Dell Precision T3500, Windows 7 64-bit
View 9 Replies
View Related
