AutoCAD Civil 3D :: Event Triggered After Modify Data In Panorama Viewer?
Dec 1, 2013
I have an addin with a palette that include some datagridviews.
I show in these datagrid, properties and information about all alignments in drawing.
With event commandEndend I can update all information if I use "grip-strectch" for some PI alignment.
However, we can modify alignment data from Panorama palette (geometry editor) and I would like to know if there are any event to catch it after modify data.
I have the same trouble that this post:
[URL]
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
I have a SelectionAdded event handler that reacts three times when selecing a single block and once when deselecting it.
If there are two blocks in the drawing but only selected one it reacts 5 or 6 times.
And it reacts every time I pass the mouse over the selected block.
Is there any way to sidestep the events in the handler so that AutoCAD doesn't grind to a halt if I have multiple blocks in the drawing. And decide to move my mouse over all of them?
Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
We have someone who doesn't need any cad fuctionality just the ability to view dwgs and occasionally print. I got to looking and found there are various versions of free DWG viewers. What is the easiest one to use? Esp for someone who doesn't normally use cad?
I know this worked in 2013. In any panorama, Feature Line Edit Elevations for example, you could select certain rows, or all of them, right-click and get a menu with the options Copy All and Copy Selected. These could then be pasted in Excel, or in my cae HEC-RAS.
We upgraded to 2014 a few months ago and hadn't discovered this until today. In 2014, with lines in the panorama selected, a right-click does nothing. I tried again in 2013, and it worked fine, and I was able to get my work done.
Is this a feature that was dropped between 2013 and 2014?
In my plug-in I have some datagridview to show alignment data of all alignments in drawing.
I have a button called (regen) to update data in these datagridviews. I read again database drawing and re-source again datagridview. (method "upload_all")
I have read some posts and blogs about this: [URL] ....
and about overrule: [URL] ....
But I don´t understand almost.
I only want to execute method "upload_all" if some alignment is modified in the drawing.
Also, I would like to do it if some alignment is just created or deleted.
Autocad Civil 3D 2014 +SP1 Quad Core Intel i7 3770-cpu 3.40Ghz. ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd 32gb RAM 1600 Mhz. nVidia Quadro 2000. Win 7 Pro 64bit
I have some objects (corridor / intersection corridor / surface / grading ...) in civil 3d 2013...When we rotate the 3d objects , object rotate pivot point about (0,0,0, or any place x,y,(z=0)..So rotated 3d object (if the Z= High value) can't be seen / can be seen as a point.
how to change the object viewer pivot point ? (not using steering wheel or zoom extents because of first time rotating objects seen so far )
Any way to change the setting in Object Viewer that will let you orbit around the cursor instead of the center of the screen? In object viwer, orbit is only constrained around the middle of the screen. To me, it would make sense to have it rotate around the cursor like in model space.
I have used the object viewer of my surface and selected conceptual visual style. I save the image as a .png file for a presentation. Is it possible to have the area that there is no surface to be black and not white? Other than opening it up in paint?
In model space I grab my tin, then object viewer. Everything comes up then immediately on rotating my vie win the object viewer the surface disappears.
When I use Object Viewer to look at just feature lines and surfaces, the feature lines do not appear at the same elevation as the surface as I shift the view around. Why is that- especially since I am looking at the surface I created from those same feature lines?
is that a feature, intended to make it easier to discern the feature lines in Object Viewer? Or a quirk of my video card?
Today I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.
Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?
I have a button which has a mousover/mousout animation. When i click the button, it will shrink down to 0%. when it does, my mousout event is triggert, which i dont want.
how can i disable the mousout event after the click event?
I've been using pipe network in Civil 3D for some time now and all I can say is I can't wait for them to rewrite it!
I've had acouple of problems with some of the default parts for the UKIE template which I have managed to fix manually but there is stil one problem I can't seem to solve. For some reason my type E manholes show up in plan and section but don't show at all in object viewer. I've even tried to create a new drawing and place a new network but again the same thing happens.
I've tried going into part builder, validating it and saving it, reload the catalog etc. just incase.
Some times I note the lack of a top warning-icon placed on top of prospector folder.
The idea is, for example, that in case I had a corridor out of date I dont see this "situation" until I navigate up to the corridors/corridor item, so I can forget easily the rebuild need. The posibility to see this icon near the name of my drawing should be very useful.
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
Running C3d 2012 here, but haven't used prior versions. I'm using fieldbooks to import survey data. If there is an error of some kind and I "Re-import event" for the fieldbook, then the occupied points from the field book are deleted out of the survey database and I get the resulting error of "point invalid" during the import. My fix is to go into my control drawing and import the control points from the drawing into the survey database then run the "re-import" again.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7 Intel Xeon (R) @2.8GHz 6.00GB Ram Civil 3D 2012 Civil 3D 2012 Intel(R) Xeon W3530 @ 2.80GHz 6.00GB Ram Windows 7 Professional
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
how you put the rule in but is there a way to remove the rule. I put one in and I don't like how its acting and would like to remove the rule from the list but I see no way do do so...
I would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.
